Tender For Special Repair To Jamujhadi Basudevpur Dhamara Road From Ch 1/000Km To 2/000Km In The District Of Bhadrak For The Year 2026-27
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Jul 2026
0 days left
EMD
62328
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhadrak → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Jamujhadi Basudevpur Dhamara Road From Ch 1/000Km To 2/000Km In The District Of Bhadrak For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation of structures roads works and drain works in hard soil including rough dressing and levelling the bed as per approved drawing & clause 301 & 304 of MORTH Specifications for Roads & Bridge work (4th revision) |
| 2 | Providing granular sub-base by using sand as per clause 401 of MORT&H specification for Road & Bridge works (4th Revision) |
| 3 | Construction of GSB by providing clsoe graded GSB grading-III materials as per Table 400-1, spreading in uniform layers with mortar grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with V.R.R to achieve the desired density complete as epr clause No.401 of MORT&H specification for road & Bridge work (4th revision) |
| 4 | Providing, laying, spreading & compacting graded stone aggregae to Wet Mix Macadam speciication including premixing the materials with water at OMC in mechanical Mix Plant carriage by tipper and laying uniform layers with paver etc, complete. |
| 5 | Providing and applying Primer coat with bitumen emulsion on prepared surface of granualr base including clearing of road surface and spraying priemr at th rate of 0.60 Kg/Sqm using mechanical means as per clause 502 of MoSRT&H Specification for Road & Bridge works (4th Revision) |
| 6 | Providing and applying Tack coat with bitumen emulsion using emulsion pressure distributor at the rat oe 0.20 Kg per sqm on the prepared bituminous / granular surface cleaned with mechanical broom as epr clasue 503 of MoSRT&H Specification for Road & Bridge works (4th Revision) |
| 7 | Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects. complete in all respects. |
| 8 | Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.2 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects complete in all respects. |
| 9 | Earthwork in ordinary soil from selected and approved borrow pit by mechanical means within a lead of 5 KM including loading and unloading from truck at worksite and bracking clods 5cm to 7cm and laying in layers to proper camber rough dressing and levelling the bed and ordinary compaction PRR etc.complete as per directiion of Engineer-in-charge. |
| 10 | Providing and laying granular sub-base in shoulder by using Moorum of appd.quality from appd.quarry laying in layers with well watering and compacting by PRR including hire and running charges of PRR with all cost of materials and labour T&P etc.complete as directed by Engineer-in-charge.. |
| 11 | Providing and laying of hot applied thermoplastic Compound 2.5mm thick including reflectorising glass beads@250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender