Tender For Construction Of New Building Of Bamra Trust Fund College At Bamra Under Pm-Usha In The District Of Sambalpur For The Year 2025-26.
Tender Value
3.09 Crore
Estimated cost
Bid Submission
31 Jul 2026
2 days left
EMD
3.09 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sambalpur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New Building Of Bamra Trust Fund College At Bamra Under Pm-Usha In The District Of Sambalpur For The Year 2025-26.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lift. complete as directed by the E.I.C |
| 2 | Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment). |
| 3 | Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and plinth & ditches works and ordinary earth work in general.1st Extra loft of 1.5m(up to 7.5m) |
| 4 | Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. |
| 5 | Supplying & filling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect. (As Per A/R Page No-1, Item No-2) |
| 6 | Carriage of excavated earth by mechanical means within 5 KM lead |
| 7 | Cement Concrete (1:3:6) using 40mm size hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. |
| 8 | Cement Concrete (1:2:4) using 12mm size hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. |
| 9 | Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 10 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. |
| 11 | Ground FloorColumn Foundation |
| 12 | Plinth Beam |
| 13 | Column Super Structure |
| 14 | Lintel |
| 15 | RCC Sill |
| 16 | First Floor Beam |
| 17 | Roof Slab |
| 18 | Chaja |
| 19 | Staircase |
| 20 | First FloorColumn Super Structure |
| 21 | Lintel |
| 22 | RCC Sill |
| 23 | First Floor Beam |
| 24 | Roof Slab |
| 25 | Chaja |
| 26 | Staircase |
| 27 | Head RoomColumn Super Structure |
| 28 | Roof Beam |
| 29 | Roof Slab |
| 30 | Straightening, cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect. |
| 31 | Ground floor |
| 32 | First floor |
| 33 | Second floor / Terrace Floor |
| 34 | Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Super Structure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 35 | Ground floor |
| 36 | First floor |
| 37 | Terrace Floor |
| 38 | Brick work with Fly Ash. Bricks in cement mortar (1:4) in Super Structure having crushing strength not less than 75.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary. |
| 39 | Ground floor |
| 40 | First floor |
| 41 | 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 42 | Ground floor |
| 43 | First floor |
| 44 | Terrace floor |
| 45 | Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Inside) |
| 46 | Ground floor |
| 47 | First floor |
| 48 | Terrace floor |
| 49 | Providing 6 mm thick cement plaster in cement mortar of mix (1:4) at all height using screened & washed sharp river sand for mortar with approved quality of cement to the ceiling of the Roof Slab, Staircase, Beams, Columns,Landings, Railings,Chajja ,Fins ,Walls ,Jally and Shelves etc. including roughening, scraping, chiseling, cleaning, closed deep chipping with slurry treatment and finished smooth to all R.C.C. Surface including cost, conveyance, loading, unloading, royalties ,stacking and all taxes , cost of all Labour,Labour cess ,Sundries, T&P, Scaffolding, Watering, Curing etc. complete in all respect as directed by the Engineer- in- charge. |
| 50 | Ground Floor |
| 51 | First Floor |
| 52 | Terrace Floor |
| 53 | Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost, conveyance ,taxes of all materials , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge. |
| 54 | Ground Floor |
| 55 | First Floor |
| 56 | Terrace Floor |
| 57 | Wall painting two coats with Acrylic paint(plastic emulsion) over a coat of primer of approved quality of premium brand & colour at all heights to the interior surface of the wall to make an even finished surface including sand papering, applying putty wherever necessary including cost, conveyance, loading, unloading, stacking, all taxes , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge. |
| 58 | Ground Floor |
| 59 | First Floor |
| 60 | Terrace Floor |
| 61 | Wall painting two coat with any approved weather coat paint including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. |
| 62 | Ground Floor |
| 63 | First Floor |
| 64 | Terrace Floor |
| 65 | Supplying, fitting and fixing Vitrified tile in floors of approved make confirmating to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C. |
| 66 | Ground Floor |
| 67 | First Floor |
| 68 | Fixing Vitrified tiles in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. |
| 69 | Ground Floor |
| 70 | First Floor |
| 71 | Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge |
| 72 | Ground Floor |
| 73 | First Floor |
| 74 | Supplying, fitting & fixing of Ceramic wall tiles of premium grade of size 300x200/200x200mm having thickness 6.5mm to 6.7mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 75 | Ground Floor |
| 76 | First Floor |
| 77 | Providing 25 mm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips using 2% water proofing cement compound (Make -sika/fosroc/Equivalent) on new work |
| 78 | First floor Roof |
| 79 | Second floor Roof |
| 80 | Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete. |
| 81 | Ground Floor |
| 82 | First Floor |
| 83 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect. |
| 84 | Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of Red oxide including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. |
| 85 | Ground Floor |
| 86 | First Floor |
| 87 | Supplying Fitting, fixing up fully glazed aluminium framed window (sliding type) made up aluminium section 9778 as window frame, section 4095, 4096 and 9777, 3994 as shutter frame with 5mm black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of all materials, all taxes, labour, T&P excluding cost of glass etc. complete as per direction of the Engineer-in-charge |
| 88 | A) Cost of Al. Frame |
| 89 | B) Cost of 5mm thick Black Glass including wastages |
| 90 | Providing and fixing of Hollow metal door at all levels from ISO 9001-2008 certified Manufacturer OEM ( Navir or Unistar/ Mediunited/ Tata Pravesh Jindal/NCL/Godrej or equivallent ). All hollow metal general purpose doors with or without vision panel. Pressed Galvanised steel Single /Double leaf of required sizes consisting of frame, shutter, infill and finish as detailed below and conforming to IS 277. All doors & frames should be finished with Thermosetting weather proof Powder Coating in desired RAL Shades. Approved manufacturer which should be ISO & CE Certified & IGBC registered company. Rate should include supply and installation of door and hardware set as mentioned in the door and hardware schedule. Door frame shall be Single rebate profile of size 100 x 50 mm made out of 1.20mm thick galvanised steel sheet (18 gauge). Frames should be butt jointed and field assembled with self tabs. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Door leaf should be 44mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 0.8mm (22 guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate Hardwares. The infill material shall be Rookwool insulation. All doors NSD 12044 should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be as per joinery details with a screw on glass beeding on the inside. The glass should be 5mm tk clear Float glass. Hardwares should include the following:4 nos Hinges on each leaf1 no Door closer on each leaf, sliding door bolt and 1 no Mortice Dead lock1 Set D-type pull handle back to back on each leaf1 no Concealed flush bolt in inactive leaf of Double door, if any1 no vision glass on each leafFastners as required.The rate includes design supply, installation, testing, commissioning , transportation, T&P complete in all respect as per direction of EIC. |
| 91 | EI ( Academic Building)Recessed wiring to light point/fan point/exhaust point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2) |
| 92 | -do- (Gr.B) (1.1.2-1.24.2) |
| 93 | -do- (Gr.C) (1.1.3-1.24.2) |
| 94 | S/F of M.S. Box for 2 Module 18 swg |
| 95 | S/F of M.S. Box for 4 Module 18 swg |
| 96 | S/F of M.S. Box for 6 Module 18 swg |
| 97 | S/F of M.S. Box for 8 Module 18 swg |
| 98 | S/F of M.S. Box for12 Module 18 swg |
| 99 | S/F of 3 pin 5/6 A.F.T switch and.Socket on existing board (Modular type) (1.25.1+1.25.4) |
| 100 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required |
| 101 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1) |
| 102 | -do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2) |
| 103 | -do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3) |
| 104 | -do- 4x10sqmm + 2 x 4 sqmm (1.8.11) |
| 105 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 106 | S/F of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) |
| 107 | S/F of 63A ICTPN main switch with MS box of 250mmx300mmx60mm deep ( (2.15.3)+(1.24.16 ) |
| 108 | S/F 100A TPN Bus-Bar with all connection (Make:BENLO & Equivalent) |
| 109 | S/F OF 63A 4POLE MCB C-TYPE (Make:L&T/Equivalent |
| 110 | S/F of 4way( 4+12) TPN MCB DB Double door (2.5.5) |
| 111 | Provn. of 3 1/2 x 35 sqmm Armoured Cable with all connections(25) |
| 112 | Laying of MV cable above 25sqmm to 120 sqmm in ground(5.1.2) |
| 113 | S/M of end termination of 31/2 X 35 (5.8.21) |
| 114 | S/F of 100A Wall Mounted Pannel board .1). In commer -1-01 number of 100a 4p 25ka MCCB Icu=100%Ics (make-ABB/Siemens/SCHNEIDER/L&T/Le Grand) with spreader, rotary handle, and UV relaease.-1no 2) 100a manual change over (make-ABB/Siemens/SCHNEIDER/L&T/Le Grand) with Aux contact KIT, Operating handle kit and output shortlink-1no 3)63A 415V AC 10KA C Curve MCB (Make-ABB/Siemens/SCHNEIDER/L&T/Le Grand)-4nos 4)63a C Curve DP MCB (Make-ABB/Siemens/SCHNEIDER/L&T/Le Grand)-8nos. 5) SPD (TYPE-1+2,50KA,3P+N) (Make-ABB/Siemens/SCHNEIDER/L&T/Le Grand)-1no 6)Instrument-(i) 03 numbers phase indicating lamp with toggle switch & HRC fuse-2set-6nos 7) (ii) 02 set of digital type multification meter with CT for voiltage , frequency,PF,THD indication with RS 485 COMPACTIVITY FOR bms data-2nos. 8)100A/5 CTS -6nos..9)200A cu Basbar-8.2kg with all materials |
| 115 | S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28) |
| 116 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2+3.3) |
| 117 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 118 | S/F of Fan hook S, Type on ceiling. |
| 119 | S/F of step type modular fan regulator |
| 120 | S/F of 12 Watt. LED bulb. |
| 121 | S/F of 300 exhaust fan with all accessories and connections(Make-Usha-Aero Clean plus DBB/Polycab-Fress on DBB/Cromton-Trans Air12\\" reversible/Havells-Ventil Air DS(HS)/Ancor-Anmol DelusR/Orient-Power Flow DBB |
| 122 | S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS) |
| 123 | S/F of 18-25 watt LED Tube light fitting compoete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL) |
| 124 | S/F of 18 Watt Ceiling Light Recessed Mount or Surface Mount(Round or Square )Type(Make Havells/Crompton/Polycab or Equivalent) |
| 125 | S/F of 10 Watt Bulk Head (Make-Havells/polycab or Equivalent) |
| 126 | Supply & Fixing of 60Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 127 | EI LaboratoryRecessed wiring to light point/fan point/exhaust point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2) |
| 128 | -do- (Gr.B) (1.1.2-1.24.2) |
| 129 | -do- (Gr.C) (1.1.3-1.24.2) |
| 130 | S/F of M.S. Box for 2 Module 18 swg |
| 131 | S/F of M.S. Box for 4 Module 18 swg |
| 132 | S/F of M.S. Box for 6 Module 18 swg |
| 133 | S/F of M.S. Box for 8 Module 18 swg |
| 134 | S/F of M.S. Box for12 Module 18 swg |
| 135 | S/F of 3 pin 5/6 A.F.T switch and.Socket on existing board (Modular type) (1.25.1+1.25.4) |
| 136 | S/Fof 6 module M.S. Box with Bakelite cover (Modular Type) on surface or in recess including providing and fixing of 2 nos 3 pin 5/6 amp. Socket out let 5/6amp. Piano type modular switch,connection,painting etc. as required (1.24.4 +2 x (1.25.1+1.25.4) |
| 137 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required |
| 138 | S/F of A.C.Starter 20Amp with 2 module Box.(Make Havells/Equivalent) |
| 139 | S/F of 15A Socket on 2 module for AC |
| 140 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1) |
| 141 | -do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2) |
| 142 | -do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3) |
| 143 | -do- 4x10sqmm + 2 x 4 sqmm (1.8.11) |
| 144 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 145 | S/F of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) |
| 146 | S/F of 63A ICTPN main switch with MS box of 250mmx300mmx60mm deep ( (2.15.3)+(1.24.16 ) |
| 147 | S/F 100A TPN Bus-Bar with all connection (Make:BENLO & Equivalent) |
| 148 | S/F OF 63A 4POLE MCB C-TYPE (Make:L&T/Equivalent |
| 149 | S/F of 32A rating \\"C\\" Series DP MCB (Make: L&T/Equivalent) |
| 150 | S/F of 4way( 4+12) TPN MCB DB Double door (2.5.5) |
| 151 | S/F of MCB 8 Way Double Door (2.3.1) |
| 152 | Provn. of 3 1/2 x 35 sqmm Armoured Cable with all connections(25) |
| 153 | Laying of MV cable above 25sqmm to 120 sqmm in ground(5.1.2) |
| 154 | S/M of end termination of 31/2 X 35 (5.8.21) |
| 155 | S/F of 63A Wall Mounted Pannel board (36\\"x33\\"x10\\") .1). 63a 4P 25KA MCCB-01NO. Icu-100% Ics (Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) with spreader, rotary handle and UV relaease 2)63a Manual change over -01(Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) with Aux Contact Kit, Operating handle kit and out put shorting link. Spreader Link-01 No. 3) 63a 4P AC 10K C-Curve MCB-03 (Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) 4) 40A C-Curve DP DP MCB-03 (Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) 5) SPD type 1+2,50ka 3P+N-01NO. (Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) 6) INSTRUMENT- (i) 3 numbers phase indicating lamp with toggle switch and HRC Fuse-2 SET. 7) (i) 02 SET of digital type multification meter with CT for voltage ,current, Freqency, PF,,THD Indication with RS 485 COMPACTIVITY for bms data. 100A Ext. 8) 100A/5 CTS-6 9) 100A BUSBAR-4.1KG with all materials. |
| 156 | S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28) |
| 157 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2+3.3) |
| 158 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 159 | S/F of Fan hook S, Type on ceiling. |
| 160 | S/F of step type modular fan regulator |
| 161 | S/F of 12 Watt. LED bulb. |
| 162 | S/F of 300 exhaust fan with all accessories and connections(Make-Usha-Aero Clean plus DBB/Polycab-Fress on DBB/Cromton-Trans Air12\\" reversible/Havells-Ventil Air DS(HS)/Ancor-Anmol DelusR/Orient-Power Flow DBB |
| 163 | S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS) |
| 164 | S/F of 18-25 watt LED Tube light fitting compoete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL) |
| 165 | S/F of 18 Watt Ceiling Light Recessed Mount or Surface Mount(Round or Square )Type(Make Havells/Crompton/Polycab or Equivalent) |
| 166 | S/F of computer board consisting of 3 nos. of 5 amp modular plug and modular switch and 1no. Of 6 amp Mini MCB, complete with wiring on 12 modular type M.S.box with modular cover. |
| 167 | S/F of 10 Watt Bulk Head (Make-Havells/polycab or Equivalent) |
| 168 | Supply & Fixing of 60Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 169 | PHSupplying all materials,labour,T&P and fitting&fixing of 4.0kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No. 13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C. |
| 170 | (a)110mm dia PVC pipe |
| 171 | (b)110mm dia PVC ‘P’ trap |
| 172 | (c)110mm dia PVC S/J/D |
| 173 | (d)110mm dia PVC D/J/D |
| 174 | (e)110mm dia PVC Door Bend |
| 175 | (f)110mm dia PVC Plain bend |
| 176 | (g)110mm dia PVC offset |
| 177 | (h)110mm dia PVC cowl |
| 178 | (i)125mm dia CP Grating |
| 179 | Supplying all materials,labour,T&P and cutting holes through brick/stone masonry walls for taking PVC pipes and fittings including making good the damages etc all complete as per the PH specification and direction of E.I.C. |
| 180 | (a)375mm thick wall |
| 181 | (b)250mm thick wall |
| 182 | (c)Roof cutting |
| 183 | Supplying all materials labour T&P and fixing water closet squatting pan (Indian type WC pan/Orissa pattern squatting pan)duly embedded in cc(1:5: 10)using 4cm hg metal all complete as per the direction of E.I.C. |
| 184 | (a)580mm Orissa pan(make -Parryware) |
| 185 | Supplying all materials labour T&P and fixing wash down water closet(Anglo Indian water closet)with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cm(1:1) etc. all complete as per specification and direction of E.I.C. |
| 186 | (a)EIWC with ‘S’ Trap with sheet cover(make-Parryware,Hindware) |
| 187 | Supplying all materials,labour,T&P and fixing bowl pattern urinal including connecting the urinal with wastepipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C. |
| 188 | Halfstall wall Urinal (Parryware/Hindware/Neycer) |
| 189 | 15mm dia Urinal spreder |
| 190 | Supplying all materials,labour,T&P and fixing glazed earth ware squatting plate size (600x350x100/450x355x100)mm with integral flushing pipe including embedding the plate in 25mm cm(1:8)laid over 150mm cc(1:4:8) using 40mm hg metal etc all complete as per specification and direction of the E.I.C. |
| 191 | Squatting urinal[600x355] |
| 192 | Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc.all complete as per PH specification and direction of E.I.C. |
| 193 | (a)550mmx400mm WHB with 32mm dia cp west,west pipe,brackets and connection pipe(make- parryware) |
| 194 | Supplying all materials,labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixing to wooden plugs with CP screws and washers complete as per PH specification and direction of E.I.C. |
| 195 | (a)600mmx450mm BE Mirror |
| 196 | Supplying all materials,labour T&P and fixing standard size glass shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C. |
| 197 | (a)(125x600)mm size glass-shelf with CP Guard rail(make -Parryware) |
| 198 | Supplying all materials,labour T&P and fixing standard size CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C. |
| 199 | (a)25mmx600mm long CP towel rail(make -Parryware) |
| 200 | (b)CP towel ring(make -Parryware) |
| 201 | Supplying all materials,labour T&P and fixing standard size CP soap holder complete with CP Brass brackets fixed to wooden plug with CP screws as per P.H. specification and direction of E.I.C. |
| 202 | (a)CP Soap holder |
| 203 | Supplying all materials labour T&P and fixing Ciramic tiles/marble tiles/kota tiles/kodapa tiles/chequered tiles in floors,threads,landing on 25mm thick bed of cm(1:1)jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of precast tiles etc. all complete as per specification and directiof E.I.C. |
| 204 | (a)In GF |
| 205 | (b)In FF |
| 206 | Supplying all materials labour T&P and fixing porcelain glazed tiles/marble tiles/Kota tiles/Kodapa tiles in dados skirting and risers of steps on 12mm thick CP(1:3)jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing & polishing complete including cost of tiles etc. all complete as per spcificaiton and direction of E.I.C. |
| 207 | (a)In GF |
| 208 | (a)In FF |
| 209 | Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member,9201 as top,9200 as bottom and middle member with frame section as 9221with tapered clip no 4660 & frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board.and as per direction of the E.I.C. |
| 210 | Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7 cm and laying in layers not exceeding 0.30m in depth as per direction of E.I.C. |
| 211 | Initial lift upto 1.50m |
| 212 | From 1.50m to 3.00m depth |
| 213 | Supplying all materials labour T&P and filling foundation & plinth with river sand well watered and rammed including conveyance of all materials to work site,payment of royality,taxes etc. all complete as per the direction of E.I.C. |
| 214 | Supplying all materials labour T&P and providing cc(1:3:6)using 4cm hg metal including watering,curing,conveyance of all materials to work site, payment of royality,taxes etc.all complete as per specification and direction of E.I.C. |
| 215 | Supplying all materials labour T&P and providing cc(1:1.5:3)using 12mm hg chips including watering,curing,conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 216 | Supplying all materials labour T&P and providing Flyash brickwork in cm(1:4) F&P having crushing strength not less than 75kg/cm2 with dimensional tolerance +/-8%including watering,curing conveyance all material to worksite payment of royality taxes etc.all complete as per specification direction of E.I.C. |
| 217 | Supplying all materials labour T&P and providing rigid and smooth centering & shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite,payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 218 | Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 219 | Supplying all materials labour T&P and providing RCC(1:1.5:3)using 12mm hg chips for RCC works including hoisting,laying,watering,curing,conveyance of all materials to work site,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 220 | Supplying all materials,labour T&P and providing 12mm thicks CP(1:3)with punning on brick/stone work including watering,curing conveyance of all materials to work site,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 221 | Supplying all materials labour T&P and fixing MS step iron in 12mm dia MS steel bar and fixing into walls of septic tank duly embedded in cc(1:3:6)all complete as per PH specification and direction E.I.C. |
| 222 | Supplying all materials labour T&P and fixing of RCC baffle wall precast with cc(1:1.5:3)using 12mm bhg chips and fitted to septic tank as per P.H. specification and direction E.I.C. |
| 223 | Supplying all materials,labour,T&P and providing fitting&fixing PVC Tee in wall including fitting the necessary with cc(1:1.5:3)with 12mm size hg chips all complete including watering,curing,conveyance of all materials to worksite, payment of royality,taxes etc. all complete as per specification and direction of E.I.C.(a)110mmx110mmx110mm PVC Tee |
| 224 | Supplying all materials labour T&P and Providing cement flush pointing (1:3)to brick masonary including watering,curing,conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C. |
| 225 | Supplying all materials labour T&P and providing 500x500x100mm thick RCC precast MH cover in cc(1:1.5:3)using 12mm hg chips placing the cover on the MH/S tank & finishing smooth all complete as per specification and direction of E.I.C. |
| 226 | Filling in F&P with excavated materials including watering and ramming as per direction of E.I.C. |
| 227 | Supplying all materials labour T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB brick work in cm(1:6)moulding&shaping the channel inside & benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside,cement flush pointing(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size hg chips with RCC manhole cover,e.w in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing, conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C. |
| 228 | (a)Inside size 760mmx760mmx460mm |
| 229 | Supplying all materials labour T&P and laying PVC pipe sewer line Grade-A of the following internal dia in trenches(to level or slope)and jointing with gasket & stiff mixture or cm(1:1),cc(1:3:6)with 40mm size hg metal on bed of the trench and hunching or allround concrete encasing with cc(1:4:8)using 40mm size hg metal including curing, conveyance to worksite,payment of royality,taxes etc. and testing all complete as per approved drawing,specification and direction of E.I.C. |
| 230 | (a)110mm dia PVC pipe with allround Hunch top |
| 231 | Supplying all labour T&P and constructing soakwaypit of the following sizes with dry brick walling from bottom upto invert of inlet pipe & 1st class KB brick work in cm(1:6)for the remaining height at top,12mm thick CP(1:4)inside & outside over masonary brick work,gravel packing in the rear of well steining RCC coverslab in cc(1:1.5:3)using 12mm size hg chips fitted handles including ew in open well excavation in all kinds of soil and refilling the cavity around the pit & painting the iron work,watering,curing,conveyance of all meterails to worksite,payment of royality,taxes etc. all complete as per approved drawing specification and direction of E.I.C. |
| 232 | (a)1.20m dia x 2.00m deep |
| 233 | Supplying all materials,labour,T&P and construction of masonry staging with providing 1st class KB brickwork in cm(1:6)of 0.46mtr height in staging,12mm CP in cm(1:6),RCC beam of 0.25mx0.30mx2.60m in cc(1:1.5:3)using 12mm size HG chips including centering,shuttering,bending and binding of rod etc watering,curring,conveyance of all materials to work site,payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 234 | (a)Stagging for 1000ltr. Storage Tank (1st Floor) |
| 235 | Supplying all materials,labour,T&P and Fitting&Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5mtr above GL and placing the tank in required position including conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.(a)1000ltr water storage tank |
| 236 | Supplying all materials,labour,T&P and fitting&fixing 10ltr capacity low level flushing cystern with a pair of cast iron or ms brackets complete with fittings such as syphonic arrangements 15mm nominal size brass/PVC ball valve with polythene float,CP brass handle,union and couplings for connection with inlet, outlet and overflow pipes,32mm dia c.p. flush bend,15mm dia. PVC inlet connection pipe including cutting holes and making good the same and connecting the flushbend with cystern and closet and connecting inlet pipe with supply main etc. all connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C. |
| 237 | (a)10Ltr.Capacity low level cistern |
| 238 | Supplying all materials,labour,T&P providing and fixing to wall or ceiling and floor PVC pipe conforming to ASTM-D-1785/89(sch-80) and pipe fitting of the following nominal bore with clamps including making good the wall,ceiling and floor testing all complete as per specification and direction of E.I.C. |
| 239 | (a)50mm dia C-PVC pipe |
| 240 | (b)32mm dia C-PVC pipe |
| 241 | (c)25mm dia C-PVC pipe |
| 242 | Supplying all materials,labour,T&P cutting holes through brick/stone masonry works including making good the damages in cm(1:4)for taking GI/PVC pipe & fitting etc. all complete as per PH specification and direction of E.I.C. |
| 243 | (a)In GF |
| 244 | (b)In FF |
| 245 | Supplying all materials,labour,T&P cutting holes in RCC floors,roofs etc.up to 19cm thick for passing GI/PVC pipes fittings and reparing the holes after insertion of pipe etc. with cc(1:1.5:3)including finishing so as to make it leak proof as per direction of E.I.C. |
| 246 | Supplying all materials,labour,T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of E.I.C. |
| 247 | (a)In GF |
| 248 | (b)In FF |
| 249 | Supplying all materials,labour,T&P and fitting & brass/CP fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H. specification and direction of E.I.C.(make- Jaguar) |
| 250 | (a)15mm dia CP(SB)Bib cock |
| 251 | (b)15mm dia CP Two way Bib cock |
| 252 | (c)15mm dia CP Pillar cock |
| 253 | (d)15mm dia CP Angle Stop cock |
| 254 | (e)15mm dia CP Concealed Stop cock |
| 255 | (f)15mm dia Health Faucet & 1.0m long Flexible pipe |
| 256 | (g)32mm dia PVC FWV |
| 257 | (h)50mm dia PVC FWV |
| 258 | (j)15mm dia CP Flange |
| 259 | 1.00HP Single Phase Submersible Pump SetSupplying of ISI mark 1.00HP single phase vertical submersible pump set with discharge of 900-1000ltr/hour and a head of 55-70m of reputed make like KSB/Texmo & equivalent including all cost,conveyance and taxes etc all complete as per direction of E.I.C. |
| 260 | Supplying all labour,T&P and fitting and fixing of 1.00HP single phase vetrical submersible pump set with commissioning and testing etc.all complete as per direction of E.I.C. |
| 261 | Supplying fitting & fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveyance of all taxes etc all complete as per direction of the E.I.C. |
| 262 | Supplying all materials labour T&Pand fitting & fixing of 2.5mm2 3core copper flat suitable cable having ISI mark of reputed company like BCH/Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 263 | Supplying fitting and fixing of plastic rope MS Well cover,MS Clamp,Stainless steel short piece,bend & socket including all cost,taxes etc all complete as per direction of the E.I.C. |
| 264 | Supplying fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C. |
| 265 | 200mmx150mm Size Bore WellL Through DTH Method:-Supplying all materials labour T&P and drilling perfectly vertical bore hole in boulder formation areas with drawn the hole hammer drilling rigs or combination drilling rigs to suit the site condition with deployment of rig, necessary accessories and consumables for a specified depth below GL including supply of necessry casing shoe,odex tools & plants,jointing materials extra sockets where required withdrawing of pipes,lowering the MS(ERW)pipes & fitting & fixing in perfectly vertical position including cutting & welding for jointing the pipes for simultaneous casing lowering in over burden boulder formation till encounter of hard rock and to drill 200mm DTH up to the desired depth as may be necessary,cleaning the site and washing bore etc. all complete providing sanitary sealing upto 5mt depth below GL as per the direction of E.I.C. |
| 266 | ((a)Drilling of 200mm. dia. Bore-0.00mtr to 44.40mtr |
| 267 | (b)Drilling 150mm dia. Bore-44.40mtr to 150.00mtr |
| 268 | Lowering the following GI/PVC pipe with or without soltted pipes as per necessity from GL upto 30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing materials,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/ GI) supplied by the contractor(including cost of pipe) |
| 269 | (a)Lowring of 200mm dia pipes-0.00mtr to 44.40mtr |
| 270 | (b)Cost of 200mm dia PVC casing pipes-0.00m to 45.00m |
| 271 | Cleaning & developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender