Tender For Day To Day Water Supply, Sanitary Maintenance And Allied Works At Ultadanga Sq Complex, Kolkata For 2025
Tender Value
2.85 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
5 days left
EMD
5707
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Water Supply, Sanitary Maintenance And Allied Works At Ultadanga Sq Complex, Kolkata For 2025
BOQ
| Sl. No. | Item Description |
| 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil |
| 2 | Pipes, cables etc, not exceeding 80 mm dia. |
| 3 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 5 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 7 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 8 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 9 | 110 mm diameter |
| 10 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 11 | Bend 87.5° -110 mm bend |
| 12 | Shoe (Plain) -110 mm Shoe |
| 13 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 14 | 110 mm |
| 15 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 16 | 1:4 (1 cement: 4 fine sand) |
| 17 | Neat cement punning |
| 18 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 19 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 20 | Renewal of old putty of glass panes (length) . |
| 21 | Cleaning and de-silting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 22 | Cleaning of all roof including mumty of staircase, Khurrah, under side of water tank on roof etc. by removing silt, fungi etc. and disposal of mulba to an authorised Municipal dump as per direction of the Engineer-in-Charge. |
| 23 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 24 | In cement mortar |
| 25 | Dismantling GI/PVC pipe with fittings and clamps including stacking within the compound as per direction of the Engineer -in Charge. |
| 26 | 15mm to 50 mm diametre pipe. |
| 27 | Dismantling fixtures where necessary as per direction of the Engineer-in-Charge. |
| 28 | Flushing cistern, wash basin, sink, EWC , Anglo Indian WC etc. |
| 29 | CP/ Brass/ PTMT/PVC/Iron stop cock/ bib cock/ pillar cock/ wheel valve/gate valve etc. upto 50mm dia. |
| 30 | Cleaning and disinfecting including masonary reservoir using lime water and bleaching powder etc. including neatly writing the \\"DATE OF CLEANING- DD-MM-YYYY\\" on the prominently visible position on the cleaned water tank wall with Synthetic paint as per direction of the Engineer-in-Charge. |
| 31 | Upto 2000 litre PVC /Masonary/RCC water Rank |
| 32 | Supplying of ISI marked G.I. fittings for G.I. water pipe line work of required length and diameter. (a) Equal or reducing Socket, Elbow, Tee etc. |
| 33 | 50mm dia. |
| 34 | 80mm dia |
| 35 | 100 mm dia |
| 36 | Long screw/Union -50mm dia. |
| 37 | Long screw/Union -80mm dia |
| 38 | Long screw/Union -100 mm dia |
| 39 | Short Pieces upto 150mm long -50mm dia. |
| 40 | Short Pieces upto 150mm long -80mm dia. |
| 41 | Short Pieces upto 150mm long -100 mm dia |
| 42 | Dismantling WC pan (indian Type) including breaking of cement concrete etc for repairing or renewing of damaged WC pan as per direction of the Engineer-in-charge. |
| 43 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 44 | Orissa pattern W.C. pan of size 580x440 mm |
| 45 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 46 | 10 litre capacity - White |
| 47 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 48 | White solid plastic seat with lid |
| 49 | Providing and fixing PVC. inlet connection for flush pipe connecting with W.C. pan. |
| 50 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 51 | Flat back wash basin of size 550x400 mm. |
| 52 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 53 | Flexible pipe -32 mm dia |
| 54 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 55 | Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 56 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 57 | 15 mm nominal outer dia. Pipes. |
| 58 | 20 mm nominal outer dia. Pipes. |
| 59 | 25 mm nominal outer dia .Pipes. |
| 60 | 32 mm nominal outer dia. Pipes. |
| 61 | 40 mm nominal outer dia. Pipes. |
| 62 | 50 mm nominal outer dia. Pipes. |
| 63 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work |
| 64 | 100mm dia |
| 65 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 66 | 100mm dia |
| 67 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 68 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 69 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 70 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 71 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 72 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 73 | Providing and fixing PTMT grating of approved quality and colour. |
| 74 | Circular type-100 mm nominal dia. |
| 75 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 76 | 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. |
| 77 | Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40 gms. |
| 78 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 79 | 15 mm nominal bore with 45 cm length. |
| 80 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 81 | With common burnt clay F.P.S. (non modular) bricks. |
| 82 | Providing and fixing Aqua CPVC high pressure ball valve(Plastic Ball) of approved quality including the cost of necessary uPVC socket, pieces of pipes etc. required for the work complete as per direction of Engineer-in-Charge : |
| 83 | 20mm nominal bore. |
| 84 | 25mm nominal bore. |
| 85 | 40mm nominal bore. |
| 86 | 50mm nominal bore. |
| 87 | Providing and fixing UPVC SCH: 80 Union in UPVC. pipe line including cutting and threading the pipe and making long screws etc. complete (New work): |
| 88 | 15 mm nominal bore. |
| 89 | 20 mm nominal bore. |
| 90 | 25 mm nominal bore. |
| 91 | 40 mm nominal bore. |
| 92 | Providing and fixing 15mm nominal bore, 195mm long PTMT shower arm. |
| 93 | Providing and fixing soil, waste and vent pipes uPVC soil waste pipe conforming to ISI No.13592 1992 (TYPE-B) manufactured by Supreme or equivalent. |
| 94 | 110 mm outer dia Type-B pipe. |
| 95 | Providing and fixing uPVC fittings for new and repairs to soil waste and vent pipe(TYPE-B) with necessary rubber ring, solvent cement, gasket etc. complete as per direction of Engineer-in-Charge. |
| 96 | 110 mm dia-Door bend (T/S) of required degree with access door. |
| 97 | Single Tee with door. |
| 98 | W.C. connector straight (Reducer type) (125 X 110 mm). |
| 99 | P Trap(125x110mm with WC ring). |
| 100 | Vent Cowl. |
| 101 | Cross Tee with door |
| 102 | Supplying, fitting and fixing PVC flushing cistern parts after removing the defective parts complete as per direction of the Engineer-in-Charge. |
| 103 | Polythene syphone with nut , plunger plate, plunger rod and lifting device complete. |
| 104 | Handle lever set for PVC flushing cistern. |
| 105 | Repairs of leakage of fullway valve/ peets valve 20mm to 50mm dia as required (Rate includes removing defective valves and refixing the same after repairing including the cost of screws, nuts packing materials etc but excluding the cost of parts required as per direction of the Engineer-in-charge. |
| 106 | Repairs of leakage of fullway valve/ peets valve above 50mm dia upto 250mm dia as required (Rate includes removing defective valves and refixing the same after repairing including the cost of screws, nuts, bolts packing materials etc but excluding the cost of parts require. |
| 107 | Repairing leakage/cleaning/ adjusting ball valve, syphone renewing washer of syphone of PVC cister, cleaning the layers of iron scaling deposited inside the PVC cistern by using acid etc. complete as per direction of the Engineer-in- Charge. |
| 108 | Removing chokage and repairing leakage of water pipe lines as and when required including cost of jointing materials such as zinc, jute etc. require to sealing the leakage of joints (Cost includes for necesary scafoldings require for out side pipe line of building upto floor-V level. Cost for fittings and pipes if required will be paid seperately). |
| 109 | 15mm to 50mm nominal dia pipe. |
| 110 | Supplying, fitting and fixing C I brackets /15 mm dia GI pipe as brackets including two coats of painting as per direction of the Engineer-in Charge for wash basin, sink etc. |
| 111 | Removing chokage of water closet. |
| 112 | Removing chokage manually and by the help of split bamboo i.e sludge, mud and other materials from the vertical HCI pipe lines over ground including cost of necessary scaffolding for cleanibg upto floor-V level complete as per direction of the Engineer-in-Charge: (a)Vertical SW pipe line upto 150mm dia. |
| 113 | Cleaning chokage of Master Trap pits of sewer lines including all necessary arrangement, T & P require for this work , including removing the sludge , mud etc upto 50m lead complete as per direction of the Engineer-in-Charge. |
| 114 | Sweeping and cleaning of open surface drain (upto any depth & width) inside the complex i/c removing the garbage, rubish to the dumping site outside the complex. |
| 115 | Periodic cleaning of sewer line, sewer manhole, sewer gully chamber and storm water underground line, storm water line inspection pits, storm water road side gully pits etc. by using bamboo/rod for clearing the sewer/storm water line,taking out sludge, debris, rubbish and other waste materials, if any, from the sewer/storm water line and flooding/flushing with sufficient quantity of water with pressure to ascertain through cleaning of drainage system for smooth and proper functioning of sewer/storm water line including disposal of the all waste material outside the municipal limit or burried into pits at safe available distance as directed all complete. (Note-The operation includes cost of all and nothing shall be paid extra on any account). |
| 116 | Underground Sewer line/Storm water drainage line upto 150mm dia |
| 117 | Sewer line/Storm water inspection Pit. |
| 118 | Credit value for dismantled unserviceable/ serviceable departmental materials: |
| 119 | G.I. pipe -15mm dia. |
| 120 | G.I. pipe -20mm dia. |
| 121 | G.I. pipe -25mm dia. |
| 122 | G.I. pipe -40mm dia. |
| 123 | G.I. pipe -50mm dia |
| 124 | G.I. pipe -100mm dia |
| 125 | Brass/Gunmetal Peets valve-20mm dia. |
| 126 | CP/Brass Bib/stop cock-15mm nominal dia. |
| 127 | Old F.P.S brick Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender