Tender For Special Repair To Bldg T-30 At Ctc Line And Bldg No P-6A, P-6/G & P-6/F3 At Morar Cantt Under Ge Gwalior.
Tender Value
47.61 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
16 days left
EMD
95230
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg T-30 At Ctc Line And Bldg No P-6A, P-6/G & P-6/F3 At Morar Cantt Under Ge Gwalior.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating over areas, n exc 1.5 m deep and getting out in any type of soil complete all as specified and as directed. (Note: As in foul condition manualy excavation works) |
| 2 | Excavating over areas, exc 1.5 m and not exc 3.0 m deep and getting out in soft/loose soil complete all as specified and as directed. (Note: As in foul condition manualy excavation works) |
| 3 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed . |
| 4 | M & L PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate) as in levelling course/mass concrete complete all as specified and directed. |
| 5 | M&L for providing cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) in surfaces channels drains and benching including form work and finishing fair and smooth using extra cement ( forming fair finished channel shall be measured and paid for separately) complete all as specified and directed. |
| 6 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, staging, slightly rounded or chamfered on edges, angles, kerbs and throating in roof complete all as specified and directed. |
| 7 | M&L for PCC 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) for filling in hollow section of pressed steel frames and like complete all as specified and directed. |
| 8 | M&L for precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in cover slabs for man holes and set in CM 1:4 including use & waste necessary form work complete all as specified and directed. Note Rienforcement and form work shall be measured paid separately) |
| 9 | M&L for RCC 1:2:4 type B1 (nominal mix) (using 20mm graded stone aggregate) as in shelves, etc complete all as specified and directed. |
| 10 | Supply only liquid water proofing compound complete all as specified and directed. |
| 11 | M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed. |
| 12 | M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4).complete all as specified and as directed. |
| 13 | M&L Granite slab 16 mm to 18 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) .the shade of granite stone including cutting and polishing type as in floor, cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing complete all as specified and directed. |
| 14 | M & L for 35 mm thick glazed and skeleton factory made shutters of 2nd class Hard Wood, open rebated and prepare to receive glass, guage etc (without sash bars) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc, size of members of shutters complete all as specified and directed. |
| 15 | S&F of Plain framed, 35mm thick panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 16 | Taking down chowkhat or frame (without taking off shutter from the frame) size not exceeding 1.5 Square Metre each , removing from the site Cutting holes size exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as required complete all as specified and directed. |
| 17 | Taking down chowkhat or frame (without taking off shutter from the frame) size exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Cutting holes size exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as required complete all as specified and as directed. |
| 18 | S &F for factory made solid panel PVC door shutter 30mm thick ( style) consisting to frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 19 | Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification & drawings complete all as specified and as directed. |
| 20 | S&F for aluminium anodised barrel tower bolt of size 150mm of extruded section complete all as specified and directed. |
| 21 | S&F of Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 22 | S&F of 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, medium weight complete all as specified and directed. |
| 23 | S&F 100mm long Butt hinges, aluminium hinges complete all as specified and directed |
| 24 | S&F of 30mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed |
| 25 | S&F of 150 mm size ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 26 | S&F for Extruded aluminium alloy handle of 150 mm size fabricated type, anodised complete all as specified and directed. |
| 27 | S&F of Aluminium peg set of 6 hooks solid body 125mm to 175mm fixed to wall with PVC plugs and screw, complete all as specified and directed. |
| 28 | S&F of 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed |
| 29 | S&F for in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed. |
| 30 | S&F for 150mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 31 | S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 32 | S & F in repair of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed |
| 33 | S&F for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 GDE -165, complete all as specified and directed. |
| 34 | M&L for mild steel TMT bars ,10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 35 | S&F of Joist, channel, angle,beam or tee sections, fixed independently without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe-290 (Gde E165) cleats etc fixed to RCC member/wall/stone masonry or any other building members etc complete all as specified and directed. |
| 36 | S&F Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete, as specified, supplied and fixed. |
| 37 | S&F Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 38 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 39 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters of aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, powder coated aluminium handles 150mm size 2 Nos, 3 Nos powder coated aluminium hinges heavy duty and 02 Nos 150mm long powder coated aluminium tower bolts in each door shutter with powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board etc. shall be measure and paid for separately. |
| 40 | M & L for Powder coated Anodised aluminium window and ventilator shutters, (adquate track), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2No.) suitable handle (1No.) complete all as specified and directed. |
| 41 | M&L for powder coated galvanised MS grid frame work of size 605mm X 605mm work for with Main Tee size 32mmx20mmx0.45mm and cross tee size 24mmx24mmx0.30mm with slot for fixing work for false ceiling complete all as specified and directed |
| 42 | M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 43 | Taking down/dismantling eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) of any description and in any position including all fittings, heads, shoes, bend, swan necks etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 44 | S&F of False ceiling 4mm thick HPSC pre-prime non asbestos fibre cement building board (size 600mm x 600 mm/ 595 mm x595 mm) decorative finish fixed or laid/inserted to timber/GI/Aluminium frame work with clips and screws as per IS-14862 complete all as specified and directed. |
| 45 | S&F false ceiling at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of semi perforated 12mm thick micro tegular edged GRG of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS tiles 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws complete all as specified and as directed. |
| 46 | M&L for machine cut Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, over and including 20mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed. |
| 47 | M&L for machine cut kota stone slab 20 - 25 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 48 | M&L for 75mm thick PCC 1:3:6 Type C2 (using 40mm graded stone aggregate) as in plinth protection surface even and fair without using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and as diected |
| 49 | M&L for 25mm thick PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate) as in levelling course finish even and smooth etc complete all as specified & directed. |
| 50 | M&L for 40mm thick Plain Cement Concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof padding/ levelling finish even and smooth etc complete all as specified & directed. |
| 51 | M&L for digital glazed ceramic coloured tiles of size 300mm x 450mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed. |
| 52 | M&L for non skid ceramic Coloured tiles of size 300mmx300mmx 6 mm to 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar( 1:6) complete all as specified and directed. |
| 53 | M&L for joint free non skid ceramic coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile size exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and pointed in white or coloured cement to match with the colour of tiles over & including 15 mm thick cement screed in CM (1:6) set and jointed in neat cement slurry complete all as specified and directed. Colour and design of tiles as approved by Engr-in-Charge. |
| 54 | M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm mm thick as in skirting fixed over and including 10 mm thick cement screed in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. Colour and design of tiles as approved by Engr-in-Charge. |
| 55 | M&L for vitrified ,coloured and printed tiles of width as directed and 8 to 10 mm thick as in skirting fixed over and including 10 mm thick cement screed in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 56 | M&L for vitrified ,coloured and printed tiles of 08 to 10 mm thick (Square / Rectangular ) polished area of each tiles size not exceeding 0.36 Sqm as in flooring over and including 15 mm thick cement screed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 57 | M&L for vitrified, double charge coloured and printed tiles of 9 to 10 mm thick (Square / Rectangular ) polished area of each tiles size exceeding 0.42 Sqm but n exc 1.00 sqm as in flooring over and including 15 mm thick cement screed in CM (1:6 ) set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 58 | M&L for vitrified , double charge coloured and printed tiles of width as directed and 9 to 10 mm thick as in skirting fixed over and including 10 mm thick cement plaster in CM (1:4 ) set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 59 | M&L precast cement concrete tiles of size 250mmx250mmx20mm, machine pressed as in roof/floor top , comfirming to IS -1237-1980 laid over & including 15mm thick screed bed in CM 1:4 and set jointed and pointed in Epoxy resin in roof floors and cut and polished, with white cement and pigment with cement mortar (1:2) by mixing of chemical or equivalent complete all as specifeid and as directed. |
| 60 | M&L for machine made ,1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles , 60mm thick of grade M-35, of any shape or shap and designe as approved, with colour pigment , laid over sand cusion fixed as in floors/ paths/ pavings etc, complete all as specified and directed.Note : Sand Cusion shall be measured and paid in separate item. |
| 61 | M&L for chequered cement concrete tiles of size 20cmx20cmx25 mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 62 | Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed. |
| 63 | M&L for 5 mm thick rendering in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 64 | M&L for 15 mm thick rendering in cement mortar (1:6) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 65 | M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as \\"supply only \\" |
| 66 | M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper, over and incl a layer of 2mm thick wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 67 | Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 68 | M&L for preparation of new plaster surfaces of wall and applying two coats of oil bound distemper over a coat of 3mm thick Birla wall care putty complete all as specified and directed. |
| 69 | M&L Complete removal of existing treatment (internal and external suraces) on walls by scrapping with steel wire brush or any other means including one coat of wall care putty on wall and applying two coats of oil emulsion complete all as specified and directed. |
| 70 | M&L for complete removal of existing treatment and preparation of surfaces of walls by scrapping/sand preparing / rubbing and finally washing with watering and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over & including 1mm thick plaster of paris putty over plaster surfaces complete all as specified and directed. |
| 71 | M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash complete all as specified and directed. |
| 72 | Material and labour for Preparing of old decorated surface of Ceilings of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed. |
| 73 | Material & Labour for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. |
| 74 | S&F 4.8 mm thick tinted glass of selected quality in square size not exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 75 | S&F 4.8 mm thick tinted glass of selected quality in square size exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 76 | M&L preperation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surface any description not otherwise described over 10 cm width or girth and complete all as specified and directed. |
| 77 | M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 78 | Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 15mm bore of pipe, complete all as specified and directed. |
| 79 | Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe, complete all as specified and directed. |
| 80 | Taking up or down steel tubing and connections including cleaning for refixing or removing to store of 25mm bore of pipe, complete all as specified. |
| 81 | Supply and laying 15mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and directed. |
| 82 | Supply and laying of 20mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and directed. |
| 83 | Supply and laying of 25mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and directed. |
| 84 | S & F in repair Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triplr layer in construction white in colour hoisted and fixed in position complete all as specified and directed. |
| 85 | S&F Rotational moulded polyethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position complete all as specified and as directed. |
| 86 | S&F for in repairs for 15mm, bib tap Fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed. |
| 87 | S&F for 15mm dia bib tap Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair and complete all as specified and directed. |
| 88 | S&F in repairs15mm size pillar taps Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure with lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed. |
| 89 | S&F in repairs for Brass CP wall mixer with Three in one pattern complete all as specified and directed. |
| 90 | S&F for in repairs 15mm angle cock chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure with lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified and directed. |
| 91 | S&F in repairs for gun metal globe/gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and directed. |
| 92 | Supply only waste coupling fittings, brass chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly nuts, flange end bedded in red lead cement and other fixed 32 mm dia bore complete all as specified and directed. |
| 93 | S&F for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 94 | Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm, complete all as specified and directed. |
| 95 | S&F in repair for 15mm dia PVC connection with PTMT nuts of length 600 mm, heavy duty, steel wire mesh coated complete all as specified and directed. |
| 96 | S&F Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia around iron stays including bolt and nuts for securing ends of stays to walls or roofs, bore pipe 100/110 mm dia pipe complete all as specified and directed. |
| 97 | S&F Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia around iron stays including bolt and nuts for securing ends of stays to walls or roofs, bore pipe 75 mm dia pipe complete all as specified and directed. |
| 98 | S&F for 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed. |
| 99 | S&F for 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all specified and directed. |
| 100 | S&F for 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls. complete all as specified and directed. |
| 101 | S&F for 110mm dia PVC(SWR)pipes bends any radious complete all as specified and directed. |
| 102 | S&F for 75 mm dia PVC(SWR)pipes bends any radious complete all as specified and directed. |
| 103 | S&F for 110mm dia PVC (SWR) pipes junction single (single T/Y) equal or unequal any radious with access door complete all as specified and directed. |
| 104 | S&F for 75mm dia PVC (SWR) pipes junction single (single T/Y) equal or unequal any radious with access door complete all as specified and directed. |
| 105 | S&F for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. |
| 106 | M&L in repair for 75 mm dia of out let PVC (SWR) floor trap plain with CP grating including jointing with solvent cement complete all specified and directed. |
| 107 | M&L for PVC (SWR) gully trap of size 125 /100 plain with grating incl. jointing with solvent cement as in repair, complete all as specified and directed. |
| 108 | M&L for cutting into existing manholes for connecting new drains of 150 mm internal dia of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) smooth finished, and reforming benching as required complete all as specified and directed. |
| 109 | S&F for in repairs of vitreous china wash basin, white, flat back, size 550 x 400mm Including waste coupling ,waste pipe and labour for fixing pillar tap, PVC connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. Note : Pillar tap and PVC connection will be measured paid separetly. |
| 110 | S&F sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket and guard and railing 60cm long completed all as specified and directed. |
| 111 | S&F in repairs Soap dish of CP fixed with PVC rawal plugs and screw, complete all as specified and directed. |
| 112 | S&F in repairs for 100mm size shower rose brass chromium plated without swivel joints including fixing to steel pipe complete all as specified and directed. |
| 113 | M&L in repairs for vitreous china squatting pan, orissa pattern of size 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete and making good to floor, complete all as specified and directed. |
| 114 | S&F in repairs vitreous china urinals, Half stall type ,white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed. |
| 115 | S&F for in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed. |
| 116 | S&F in repair PVC 32 mm dia flush pipe fixed to pedestal pan, incl all joints, of polythylene of low or high denisity for low level flushing cistern complete all as specified and directed. |
| 117 | M&L for Forming Construction joint 30mm deepx10mm wide filled with sealing compound grade A complete all as specified and as diected. |
| 118 | Demolition of brick work / stone work built in cement mortar including all quions, arches, pillars, beam etc complete all as specified and directed |
| 119 | Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 120 | Demolition of concrete of any description and in position complete all as secified and directed. |
| 121 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) any description and in any position not otherwise specifically provided for complete all as specified and directed. Note: Demolished material through out of MoD Land rate included above item. |
| 122 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 123 | Dismantaling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 124 | M&L for vitrified paver color tiles not exc 0.36 sqm each of 10 mm thick, moulded set jointed and pointed in neat cement slurry with grey cement and pigment, in floors, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed. |
| 125 | All as per Item No 132 above but in skirtings, dados and risers to steps etc over & including 10mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 126 | S&F 5mm thick, 600mm wide rounded edge mirror of selected quality glass, with back polishig mounted and fixed with stainless steel decorative cap wahsers and screws set fixed on PVC rawl plugs complete all as specified and directed. |
| 127 | S&F for in repairs full Brass urinal Spreader chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure for iron pipe fixed and complete all as specified and directed. |
| 128 | S&F for 4 mm thick ACP board both side lamination fixed with screws complete all as specified and directed. Please Enable Macros to View BoQ information |
| 129 | S&F for 4 mm thick ACP board both side lamination fixed with screws complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender