Invitation For Quotation Of Non-Csr Furniture, Flooring, Decorative Work & Outdoor Lighting Items For The Work Of Farmers Multipurpose Knowledge Center (Fmkc) Under The Gosikhurd National Project, Taluka-Brahmapuri, District-Chandrapur.

Sharing tender

Invitation For Quotation Of Non-Csr Furniture, Flooring, Decorative Work & Outdoor Lighting Items For The Work Of Farmers Multipurpose Knowledge Center (Fmkc) Under The Gosikhurd National Project, Taluka-Brahmapuri, District-Chandrapur.--- 1 Providing And Laying Andromela White/ Quartz Zed Black/Inley For Flooring 18 To 20 Mm Thick Laid To Line And Level With Approved Colour And Pattern Of Granite Flooring Work Laid On A Bed 1:4 Cement Mortar Including Cement Float,Striking Joints Neat Cement Slurry Including Cutting, Rounding , Edge Polishing, Curing And Cleaning Etc.Complete. 2 Providing, Fabricating And Fixing Skylight Comprising Ms Tubular Frame Of 50Mmx50Mmx5Mm, Treated With One Coat Of Anti-Corrosive Primer And Two Coats Of Synthetic Enamel Paint (Or Powder-Coated Finish), Glazed With 12 Mm Thick Clear Toughened Safety Glass, Fixed Using Epdm Gaskets, Aluminium Pressure Plates, Ss Fasteners, Weatherproof Silicone Sealant And All Necessary Accessories. The Item Shall Include Fabrication, Welding, Anchoring To Rcc Structure, Cutting, Lifting, Installation, Sealing, Testing For Water-Tightness, Scaffolding, Labour, Transportation And All Materials Complete As Per Approved Drawings And The Directions Of The Engineer-In-Charge. 3 Providing, Supplying And Fixing Pvc Ceiling System Of Approved Colour, Texture And Pattern, Comprising High-Quality, Lead-Free Rigid Pvc Ceiling Panels Of Minimum 1.2 Mm Thickness And 250 Mm Width (Or As Per Approved ManufacturerS Standard), Fixed To A Framework Of Gi Perimeter Channels (0.50 Mm Thick) And Gi Intermediate Sections/Furring Channels (0.50–0.55 Mm Thick) Suspended From The Rcc Slab Using Approved Gi Suspension Hangers, Anchor Fasteners, Threaded Rods, Clips And Accessories At Recommended Spacing.Enclude Tw Purline At Joints Of Sheet Of Size 50Mm X75Mm Finish With Melamine Finish.The Ceiling Shall Include Matching Pvc Edge Trims, H-Joints, Corner Profiles, Expansion Joints Where Required, Concealed Interlocking Tongue-And-Groove Joints, Neatly Finished With True Alignment, Level And Plumb. The Installation Shall Be Carried Out Strictly As Per The ManufacturerS Recommendations, Ensuring A Smooth, Uniform And Sag-Free Finish.The Item Shall Include All Materials, Framework, Suspension System, Fasteners, Cutting, Notching, Edge Finishing, Scaffolding, Labour, Handling, Transportation, Loading, Unloading, Wastage, Testing, Qa/Qc, All Leads And Lifts, Taxes, Royalties And Incidental Charges, Complete As Directed By The Engineer-In-Charge. 4 Providing, Fabricating And Fixing Single Bed (Guest Room) Of Overall Size 2000 Mm (L) × 900 Mm (W) × 450 Mm (H), Fabricated From 18 Mm Thick Bwr Grade Plywood Conforming To Is 303, Finished On Exposed Faces With Approved Natural Veneer . Legs In Tw Of Size 75X75 Mm Finish With Melamine Polish,Centre Support In Tw Of Size 35X50 Mm Finish With Melamine Polish.2 Mm Thick Pvc Edge Banding To All Exposed Edges.Bed Top In 12 Mm Bwr Grade Plywood Conforming To Is 303, Finished With Oil Paint Of Approved Shed. The Bed Shall Be Provided With Necessary Intermediate Tw Supports, Connectors, Ss Screws, Fittings And Hardware Complete, Fixed In Position As Per Approved Drawings And As Directed By Engineer-In-Charge. 5 Providing, Fabricating And Fixing Side Table(Guest Room) Of Overall Size 600 Mm (L)X450 Mm (W)X450 Mm (H), Fabricated From 18 Mm Thick Bwr Grade Plywood Conforming To Is 303 With Necessary Framing . The Table Shall Be Finished With Approved Natural Veneer And Melamine Polish.Have One Drawers On Telescopic Channels Complete With Locking Arrangement, Handles, Fittings, Fixtures And Hardware, Fixed In Position As Per Approved Drawings As Directed By Engineer-In-Charge. 6 Providing, Fabricating And Fixing Tv Panel (Guest Room) Overall Size 3150 Mm (L) × 303 Mm (D) × 1200 Mm (H) As Per Approved Drawings, Fabricated From 18 Mm Thick Bwr Grade Plywood Conforming To Is 303, Finished With Approved 1Mm Laminate And Melamine Polish On All Exposed Surfaces, Comprising A Full-Height Tv Back Panel With 35 Mm Concealed Service Cavity For Routing Tv, Electrical And Data Cables. One Decorative Side Panel With 450 Mm × 1000 Mm Mirror, One Continuous Low-Level Storage Unit Incorporating Drawer Units On Both Sides Fitted With Heavy-Duty Telescopic Channels, And One Centrally Located Open Shelf For Set-Top Box And Media Accessories; Internal Partitions, Drawer Boxes And Back Panels Shall Be Made Of Approved Bwr Grade Plywood, All Exposed Edges Finished With 2 Mm Thick Pvc Edge Banding, Complete With Ss 304 Hinges, Telescopic Drawer Channels, Ss Handles, Magnetic Catches, Screws, Fasteners, Adhesives, Mirror Fittings, Concealed Fixing Arrangements And All Necessary Hardware And Accessories, Including Fixing To Wall, Making Service Openings, Transportation, Labour, Finishing And Making Good, Complete In All Respects As Per Approved Drawings And As Directed By The Engineer-In-Charge. 7 Providing, Fabricating And Fixing Wardrobe(Guest Room) Of Overall Size 1200 Mm (W) × 600 Mm (D) × 2100 Mm (H) As Per Approved Drawings, Fabricated From 25 Mm Thick Bwr Grade Plywood Conforming To Is 303 For Shutters, 35 Mm Thick Built Up Plywood Section Consisting Of Two Layers Of 18 Mm Bwr Plywood Bonded Together For Top And Vertical Members Where Specified, 12 Mm Thick Plywood For Back Panel, Shelves And Shutter Frame, With 6 Mm Thick Plywood Infill Panels On Both Sides Of The Shutter Frame, And Internal Surfaces Finished With 0.8 Mm Laminate While All Exposed Surfaces Shall Be Finished With 1.5 Mm Thick Approved Laminate. The Wardrobe Shall Comprise A Full-Height Hanging Compartment Complete With Ss 304 Hanging Rod, One Drawer Mounted On Heavy-Duty Telescopic Channels, Adjustable Storage Shelves, And 35 Mm × 100 Mm Skirting At The Base, Complete With Ss 304 Hinges, Handles, Locks, Magnetic Catches, Pvc Edge Banding, Screws, Fasteners And All Necessary Fittings And Accessories. The Item Shall Also Include A Separate Luggage Rack Of Overall Size 989 Mm (L) × 600 Mm (D) × 450 Mm (H), Fabricated From 35 Mm Thick (18 Mm × 2) Bwr Grade Plywood With Approved Laminate Finish On All Exposed Surfaces, Top Provided With Ss Strips, And One 12 Mm Thick Plywood Shoe Shelf Below, Complete With All Supporting Members, Fittings, Fixtures And Accessories. The Entire Work Shall Be Fixed In Position, Finished Complete In All Respects As Per Approved Drawings And As Directed By The Engineer-In-Charge. 8 Providing, Fabricating And Fixing Wall-Mounted Study Table/Breakfast Table (Guest Room) Of Overall Size 900 Mm (L) × 600 Mm (D) × 900 Mm (H) As Per Approved Drawings, Fabricated From 35 Mm Thick (18 Mm × 2) Bwr Grade Plywood Conforming To Is 303, Finished With Approved Laminate On All Exposed Surfaces, The Table Top Having Rounded Machine-Finished Edges, Supported On One Side By A 50 Mm Diameter Ss 304 Pipe Leg Complete With Base Plate And On The Other Side By A 35 Mm Thick Vertical Plywood Support Panel Finished With Laminate, Complete With All Necessary Ss Screws, Brackets, Fasteners, Edge Banding, Fittings, Fixtures, Adhesives And Accessories, Including Fixing To Wall, Making Good And Finishing, Complete In All Respects As Per Approved Drawings And As Directed By The Engineer-In-Charge. 9 Providing, Fabricating And Fixing Double Bed(Vip Guest House) Of Overall Size 1800 Mm (W) × 1880 Mm (L) × 350 Mm (H) As Per Approved Drawings, Fabricated Entirely From Seasoned First Class Teak Wood (Tw) Comprising 50 × 150 Mm Thick Tw Members For The Main Bed Frame And 35 × 75 Mm Thick Tw Members For Internal Framing, Headboard Frame, Side Rails And Support Members, Complete With Decorative Carved Headboard And Shaped Footboard/Legs As Shown In The Drawings. The Mattress Platform Shall Consist Of 18 Mm Thick Teak Wood Boarding Fixed Over The Teak Wood Framework. The Headboard Of Height 650 Mm Shall Be Upholstered With 32 Mm Thick High-Density Foam Covered With Approved Upholstery Fabric And Decorative Quilting Pattern As Shown. The Bed Shall Be Designed To Accommodate A 100 Mm Thick Mattress. All Exposed Teak Wood Surfaces Shall Be Machine-Finished, Smooth Planed, Sanded And Finished With Approved Melamine Polish, Preserving The Natural Grain Of The Timber. The Work Shall Include All Necessary Teak Wood Mouldings, Corner Joints, Screws, Concealed Fasteners, Adhesives, Fittings, Fixtures And Accessories, Complete In All Respects, Fixed In Position As Per Approved Drawings And As Directed By The Engineer-In-Charge 10 Providing, Fabricating And Fixing Single Bed(Vip Guest House) Of Overall Size 1000 Mm (W) × 1880 Mm (L) × 350 Mm (H) As Per Approved Drawings, Fabricated Entirely From Seasoned First Class Teak Wood (Tw) Comprising 50 × 150 Mm Thick Tw Members For The Main Bed Frame And 35 × 75 Mm Thick Tw Members For Internal Framing, Headboard Frame, Side Rails And Support Members, Complete With Decorative Carved Headboard And Shaped Footboard/Legs As Shown In The Drawings. The Mattress Platform Shall Consist Of 18 Mm Thick Teak Wood Boarding Fixed Over The Teak Wood Framework. The Headboard Of Height 650 Mm Shall Be Upholstered With 32 Mm Thick High-Density Foam Covered With Approved Upholstery Fabric And Decorative Quilting Pattern As Shown. The Bed Shall Be Designed To Accommodate A 100 Mm Thick Mattress. All Exposed Teak Wood Surfaces Shall Be Machine-Finished, Smooth Planed, Sanded And Finished With Approved Melamine Polish, Preserving The Natural Grain Of The Timber. The Work Shall Include All Necessary Teak Wood Mouldings, Corner Joints, Screws, Concealed Fasteners, Adhesives, Fittings, Fixtures And Accessories, Complete In All Respects, Fixed In Position As Per Approved Drawings And As Directed By The Engineer-In-Charge 11 Providing, Fabricating And Fixing Wardrobe With Dressing Unit (Vip Guest House) Of Overall Size Approximately 690 Mm (W) × 600 Mm (D) × 2100 Mm (H) For Wardrobe And 600 Mm (W) × 600 Mm (D) × 1800 Mm (H) For Dressing Unit, As Per Approved Drawings, Fabricated Entirely From Seasoned First Class Teak Wood (Tw), Comprising Teak Wood Sides, Top, Bottom, Shelves, Shutter, Frame, Drawer Fronts, Drawer Boxes, Skirting, Mouldings And All Visible Members. The Wardrobe Shall Consist Of A Single Full-Height Shutter With Decorative Teak Wood Frame And Recessed Panel, Complete With Ss 304 Hanging Rod, Storage Shelf And All Necessary Internal Arrangements. The Dressing Unit Shall Comprise A Teak Wood Framed Mirror, Dressing Top And Two Teak Wood Drawers Fitted With Heavy-Duty Telescopic Channels. All Teak Wood Surfaces Shall Be Machine-Finished, Smooth Planed, Sanded And Finished With Approved Melamine Polish, Preserving The Natural Grain Of The Timber. The Work Shall Be Complete With Ss 304 Butt Hinges, Ss/Teak Wood Handles, Locks, Magnetic Catches, Telescopic Drawer Channels, Mirror Fittings, Screws, Fasteners, Teak Wood Mouldings, Skirting/Base Profile And All Necessary Fittings And Accessories, Fixed In Position Complete In All Respects As Per Approved Drawings And As Directed By The Engineer-In-Charge. 12 Providing, Fabricating And Fixing Side Table(Vip Guest House) Of Overall Size 600 Mm (L)X300 Mm (W)X520 Mm (H), Fabricated From 18 Mm Thick Bwr Grade Plywood Conforming To Is 303 With Necessary Framing And Heavy-Duty Swivel Castors. The Table Shall Be Finished With Approved Natural Veneer And Melamine Polish.Have One Drawers On Telescopic Channels Complete With Locking Arrangement, Handles, Fittings, Fixtures And Hardware, Fixed In Position As Per Approved Drawings As Directed By Engineer-In-Charge. 13 Providing And Supplying Corner Table(Vip Guest House) Of Size 450 X 450 X 450 Mm Made Up Of Decorative Tw Frame And Legs As Per Design With Tw Carvings, Moldings And Plywood Top And 4 Mm Approved Veneer With 6Mm Clear Glass Top With Melamine Polished All Exposed Surfaces And All Antique Brass Fittings As Per Design Including All Leads, Lift, Labor ,Transport And All Taxes Etc Complete To Entire Satisfaction Of Engineer In Charge. 14 Providing And Supplying Center Table(Vip Guest House) Of Size 900 Mm Dia X 750 Mm (H)Made Of Teak Wood Frame And Legs With Design And Carvings As Per Design With 6Mm Thk Clear Glass Top On Plywood And Veneer Top All Exposed Surfaces Melamine Polished Including All Brass Hardware And Fittings And Rubber Buffers For Tw Legs And Glass Top Including All Leads ,Lifts , Labour Charges And Transport Including All Taxes Etc Complete As Per Design To Complete Satisfaction Of Engineer Incharge. 15 Providing, Supplying Solid Wood Lounge Chair(Vip Guest House) Of Approved Make And Design, Overall Size Approximately 650 Mm (W) × 600 Mm (D) × 780 Mm (H) With Seat Height Approximately 450 Mm, Comprising A Seasoned Solid Teak Wood Frame With Natural Polish (Melamine/Pu Finish), Curved Upholstered Backrest And Fixed Armrests, Cushioned Seat And Inner Back With 40–50 Density Polyurethane Foam, Upholstered In Approved Premium Fabric (Minimum 450 Gsm, Abrasion Resistance 30,000 Martindale Or Equivalent) As Approved. The Chair Shall Have Ergonomically Designed Back Support, Tw Wooden Legs With Protective Nylon/Felt Bushes, All Joints Securely Glued And Mechanically Fastened, Complete With All Hardware, Polishing, Stitching, Finishing And Workmanship As Per Approved Of Engineer Incharge.. 16 Providing, Fabricating And Fixing Study Table(Vip Guest House) Of Overall Size 1200 Mm (L)X600 Mm (W)X750 Mm (H), Fabricated From 18 Mm Thick Bwr Grade Plywood Conforming To Is 303 . The Table Shall Be Finished With Approved Natural Veneer And Melamine Polish.Provided With Two Drawers Mounted On Heavy Duty Telescopic Channels And One Open Storage Compartment Complete With Locking Arrangement, Handles, Fittings, Fixtures And Hardware, Fixed In Position As Per Approved Drawings As Directed By Engineer-In-Charge. 17 Providing, Fabricating And Fixing Tv Panel (Vip Guest Room) Overall Size 2650 Mm (L) × 303 Mm (D) × 1200 Mm (H) As Per Approved Drawings, Fabricated From 18 Mm Thick Bwr Grade Plywood Conforming To Is 303, Finished With Approved Natural Veneer And Melamine Polish On All Surfaces, Comprising A Full-Height Tv Back Panel With 35 Mm Concealed Service Cavity For Routing Tv, Electrical And Data Cables. One Continuous Low-Level Storage Unit Incorporating Drawer Units On Both Sides Fitted With Heavy-Duty Telescopic Channels, And One Centrally Located Open Shelf For Set-Top Box And Media Accessories; Internal Partitions, Drawer Boxes And Back Panels Shall Be Made Of Approved Bwr Grade Plywood, All Exposed Edges Finished With Veneer Edge , Complete With Ss 304 Hinges, Telescopic Drawer Channels, Ss Handles, Magnetic Catches, Screws, Fasteners, Adhesives, Concealed Fixing Arrangements And All Necessary Hardware And Accessories, Including Fixing To Wall, Making Service Openings, Transportation, Labour, Finishing And Making Good, Complete In All Respects As Per Approved Drawings And As Directed By The Engineer-In-Charge. 18 Providing And Fixing Back Panelling (Guest Bed) Of Approved Pattern Comprising Framework Fabricated From 18 Mm Thick Bwr Grade Plywood Conforming To Is 303 With Vertical Supports Of Size 150 Mm × 40 Mm, Clad With 12 Mm Thick Bwr Grade Plywood Conforming To Is 303 And Finished With Approved 1Mm Laminate Having Decorative Bedding Grooves As Shown In Approved Drawings. All Exposed Edges Shall Be Finished With Tw Patti And Exposed Surfaces With Melamine Polish,Fixing Led Rope Light Inside Niche Complete With Fixtures, Fasteners And Accessories, Fixed In Position As Directed By Engineer-In-Charge. 19 Providing And Supplying 3-Seater Sofa Of Approved Design And Configuration, Having Overall Dimensions Of 2000 Mm (L) × 850 Mm (D) × 850 Mm (H) (±25 Mm Tolerance), Comprising A Frame Made Of Seasoned, Chemically Treated And Kiln-Dried Hardwood With Main Members Of Size 100 Mm × 100 Mm, Seat Frame Members Of Size 100 Mm × 50 Mm, Vertical Members Of Size 50 Mm × 50 Mm, Leg Supports Of Size 100 Mm × 100 Mm And Secondary Members Of Size 50 Mm × 25 Mm, Complete With 75 Mm Wide High-Tensile Nylon Webbing. The Seat And Backrest Shall Be Provided With 100 Mm Thick Polyurethane Foam Of Minimum Density 50 Kg/M³. The Armrests Shall Be Provided With 50 Mm Thick Polyurethane Foam Wrapped With 25 Mm Thick Soft Foam. The Upholstery Shall Be Of Approved Premium-Quality Polyester Fabric Of Minimum 320 Gsm Or Equivalent, Colourfast, Abrasion-Resistant And Stain-Resistant, Neatly Fixed Over The Cushioning. The Item Shall Be Complete With All Necessary Fittings, Fixtures And Accessories, Finished In All Respects, And Placed In Position As Directed By The Engineer-In-Charge. 20 Providing And Supplying 2-Seater Sofa Of Approved Design And Configuration, Having Overall Dimensions Of 1600 Mm (L) × 850 Mm (D) × 850 Mm (H) (±25 Mm Tolerance), Comprising A Frame Made Of Seasoned, Chemically Treated And Kiln-Dried Hardwood With Main Members Of Size 100 Mm × 100 Mm, Seat Frame Members Of Size 100 Mm × 50 Mm, Vertical Members Of Size 50 Mm × 50 Mm, Leg Supports Of Size 100 Mm × 100 Mm And Secondary Members Of Size 50 Mm × 25 Mm, Complete With 75 Mm Wide High-Tensile Nylon Webbing. The Seat And Backrest Shall Be Provided With 100 Mm Thick Polyurethane Foam Of Minimum Density 50 Kg/M³. The Armrests Shall Be Provided With 50 Mm Thick Polyurethane Foam Wrapped With 25 Mm Thick Soft Foam. The Upholstery Shall Be Of Approved Premium-Quality Polyester Fabric Of Minimum 320 Gsm Or Equivalent, Colourfast, Abrasion-Resistant And Stain-Resistant, Neatly Fixed Over The Cushioning. The Item Shall Be Complete With All Necessary Fittings, Fixtures And Accessories, Finished In All Respects, And Placed In Position As Directed By The Engineer-In-Charge. 21 Providing, Fabricating And Fixing Vip Dining Table Having Overall Dimensions Of 4840 Mm (L) × 950 Mm (W) × 850 Mm (H), Fabricated From 19 Mm Thick Bwr Grade Plywood Conforming To Is 303, Supported On A Seasoned, Chemically Treated And Kiln-Dried Teak Wood Framework With Adequate Intermediate Members And Stiffeners To Ensure Structural Rigidity. The Table Top Shall Be Finished With 19 Mm Thick Clear Toughened Glass Having Machine-Polished Edges, Laid Over The Plywood Top. All Exposed Surfaces Shall Be Finished With Approved Natural Teak Veneer Of Minimum 0.6 Mm Thickness And Melamine Polish Of Approved Finish. Exposed Edges Shall Be Provided With Teak Wood Lipping/Mouldings Of Approved Profile, Complete With All Necessary Fittings, Fixtures, Hardware, Adhesives, Screws, Polishing Materials And Accessories, Finished In All Respects And Fixed In Position As Directed By The Engineer-In-Charge. 22 Providing, Supplying And Placing Dining Chair(Vip Guest House) Of Overall Size Approximately 500 Mm (W) × 550 Mm (D) × 820 Mm (H) Or As Per Approved Drawings, Comprising A Seasoned First Class Teak Wood (Tw) Frame With Tapered Legs And Reinforced Seat Support Members, All Joints Mortise-And-Tenon Construction, Glued And Screwed For Rigidity. The Chair Shall Have An Ergonomically Designed Curved Backrest And Cushioned Seat, Upholstered With Approved Premium Upholstery Fabric Over 50 Mm Thick High-Density Polyurethane Foam (40 Kg/M³ Minimum) For Seat And 32 Mm Thick High-Density Foam For Backrest, Finished With Concealed Stitching. All Exposed Teak Wood Surfaces Shall Be Machine-Finished, Smooth Planed, Sanded And Finished With Approved Melamine Polish, Preserving The Natural Grain Of The Timber. The Chair Shall Be Complete With Nylon Floor Protectors/Glides, Concealed Fasteners, Screws, Adhesives, Upholstery Materials And All Necessary Fittings And Accessories, Complete In All Respects As Per Approved Drawings And As Directed By The Engineer-In-Charge. 23 Providing, Fabricating And Fixing Manager Table Of Overall Size 2200 Mm (L) × 600 Mm (D) × 750 Mm (H) With Side Credenza Of Size 900 Mm (L) × 450 Mm (D) × 750 Mm (H), Fabricated From 18 Mm Thick Bwr Grade Plywood And Finished With Decorative 1Mm Laminate On Exposed And Inner Faces Conforming To Is 303. Table Top And Gable Ends Shall Be Finished With Approved Pvc Membrane Finish Having Waterfall Edges, .Main Table With Five Drawers And One Shutter Mounted On Telescopic Channels And Hinges And Side Credenza Shall Comprise Two Shutters And Two Drawers On Telescopic Channels Complete With Locking Arrangement, Handles, Fittings, Fixtures And Hardware, Fixed In Position As Per Approved Drawings And As Directed By Engineer-In-Charge. 24 Providing, Fabricating And Fixing Reception Table Of Overall Size 2550 Mm (L) × 600 Mm (D) × 750 Mm (H) With Side Credenza Of Size 1700 Mm (L) × 450 Mm (D) × 750 Mm (H), Fabricated From 18 Mm Thick Bwr Grade Plywood And Finished With Natural Veneer On Exposed Faces With Melamine Polish. Table Top And Gable Ends Shall Be Finished With Approved Pvc Membrane Finish Having Waterfall Edges, Laminated All Inner Faces.Main Table With Four Drawers Mounted On Telescopic Channels And Side Credenza Shall Comprise Two Shutters Complete With Locking Arrangement, Handles, Fittings, Fixtures And Hardware, Fixed In Position As Per Approved Drawings And As Directed By Engineer-In-Chargee. 25 Providing, Fabricating And Fixing Admin Executive Table A Of Overall Size 1600 Mm (L) × 600 Mm (D) × 750 Mm (H) With Side Credenza Of Size 900 Mm (L) × 450 Mm (D) × 750 Mm (H), With Partation Of Size 1680 Mm X 2499 Mm X 1500 Mm (H),Fabricated From 18 Mm Thick Bwr Grade Plywood And Finished With Decorative 1Mm Laminate On Exposed Faces Conforming To Is 303. Table Top And Gable Ends Shall Be Finished With Approved Membrane Finish Having Waterfall Edges, Laminated All Inner Faces.Main Table With Four Drawers Mounted On Telescopic Channels And Side Credenza Shall Comprise Two Shutters Complete With Locking Arrangement, Handles, Fittings, Fixtures And Hardware, Fixed In Position As Per Approved Drawings And As Directed By Engineer-In-Charge. 26 Providing, Fabricating And Fixing Admin Executive Table B Of Overall Size 1530 Mm (L) × 600 Mm (D) × 750 Mm (H) With Side Credenza Of Size 900 Mm (L) × 450 Mm (D) × 750 Mm (H), With Partation Of Size 1530 Mm X 600 Mm X 1500 Mm (H),Fabricated From 19 Mm Thick Bwr Grade Plywood And Finished With Decorative 1Mm Laminate On Exposed Faces Conforming To Is 303. Table Top And Gable Ends Shall Be Finished With Approved Membrane Finish Having Waterfall Edges, Laminated All Inner Faces.Main Table With Four Drawers Mounted On Telescopic Channels And Side Credenza Shall Comprise Two Shutters Complete With Locking Arrangement, Handles, Fittings, Fixtures And Hardware, Fixed In Position As Per Approved Drawings And As Directed By Engineer-In-Charge. 27 Providing ,Fabricating And Fixing Canteen Table (1800Mm) Of Overall Size 1800 Mm × 900 Mm × 750 Mm High, Comprising Legs And Frame Shall Be Fabricated From Powder-Coated Ms Sections, Legs From Ms 75 Mm Dia Pipe With Bottom Hollow Ms Dome, Top Frame 50 Mm × 6 Mm Ms Flat And Top In Approved Granite With Moulding,The Extended Part 75 Mm Have Ganite From Bottom With Moulding. Complete With Fittings, Fixtures And Hardware As Directed By Engineer-In-Charge. 28 Providing And Fixing Reading Table (1.5M) Of Overall Size 1500 Mm × 750 Mm × 750 Mm High, Comprising 18 Mm Thick Bwr Grade Plywood Conforming To Is 303 With 1Mm Laminate To Exposed Edges. Table Top 35 Mm Thk In Bwr Grade Plywood Conforming To Is 303 With 1Mm Laminate Finish On Both Side,External Exposed Surfaces Shall Be Finished With Teak Wood Patti And Finish With Melamine Polish,Foot Rest In Ms Tube 35X35 Mm Finish With Pu Paint Of Approved Colour . Complete With Fittings, Fixtures And Hardware As Directed By Engineer-In-Charge. 29 Providing And Fixing Reading Table (2.4M) Of Overall Size 2400 Mm × 750 Mm × 750 Mm High, Comprising 18 Mm Thick Bwr Grade Plywood Conforming To Is 303 With 1Mm Laminate To Exposed Edges. Table Top 35 Mm Thk In Bwr Grade Plywood Conforming To Is 303 With 1Mm Laminate Finish On Both Side,External Exposed Surfaces Shall Be Finished With Teak Wood Lipping And Finish With Melamine Polish,Foot Rest In Ms Tube 35X35 Mm Finish With Pu Paint Of Approved Colour . Complete With Fittings, Fixtures And Hardware As Directed By Engineer-In-Charge. 30 Providing And Supplying Library Chair Asoverall Size Approximately 500 Mm (W) × 550 Mm (D) × 820 Mm (H) , Comprising An Ergonomically Contoured One-Piece Moulded Polypropylene (Pp) Seat And Backrest In Approved Colour, Securely Fixed To A Seasoned Solid Teak Wood (Tw) Frame With Tapered Legs And Concealed Mechanical Fasteners. The Chair Shall Have A Comfortable Curved Backrest, Smooth Rounded Edges, Anti-Skid Nylon Floor Protectors, And All Exposed Teak Wood Members Shall Be Machine-Finished, Smooth Planed, Sanded And Finished With Approved Melamine Polish. The Chair Shall Be Complete With All Necessary Brackets, Screws, Fasteners, Fittings And Accessories, Capable Of Withstanding Normal Institutional Use, And Supplied And Placed In Position Complete In All Respects As Per Approved Drawings And As Directed By The Engineer-In-Charge. 31 Providing And Supplying Library Book Rack Of Overall Size 3072 Mm (L) × 450 Mm (W) × 2000 Mm (H), Fabricated From 18 Mm Thick Bwr Grade Plywood Conforming To Is 303 , Finished With 1 Mm Decorative Laminate On Exposed Faces And Inner Faces . 2 Shelf Of 12 Mm Glass With All Required Ss Fittings And One Middle Shelf With 18 Mm Bwr Grade Plywood Conforming To Is 303 Finish Both Sides With Laminate , Openable Door Shutter Having 75Mm Frame In 18 Mm Thk Bwr Grade Plywood Conforming To Is 303 With Clear 5 Mm Glass, Stainless Steel Handles,Hinges, Fittings, Fixtures And Hardware, Fixed In Position As Directed By Engineer-In-Charge. 32 Providing, Fabricating And Fixing Library Enquiry Desk Of Overall Size 3000 Mm (L) × 800 Mm (D) × 750 Mm (H) Withfabricated From 18 Mm Thick Bwr Grade Plywood And Finished With Decorative 1Mm Laminate On Exposed Faces Conforming To Is 303. Table Top And Sides Shall Be In 18 Mm Thick Bwr Grade Plywood And Finished With Decorative 1Mm Laminate On Exposed Faces And Inner Faces Conforming To Is 303 . Table With Nine Drawers Of 450 Mm (W) Mounted On Telescopic Channels And One Shutters Complete With Locking Arrangement, Handles, Fittings, Fixtures And Hardware, Fixed In Position As Per Approved Drawings And As Directed By Engineer-In-Charge. 33 Providing ,Fabricating And Fixing Soil Testing Lab Table Of Overall Size 12045 Mm(L) × 750 Mm × 750 Mm High, Comprising Legs And Frame Shall Be Fabricated From Powder-Coated Ms Sections, Legs From Ms 50X50 Mm Square Pipe ,Top Frame 50 Mm × 6 Mm Ms Flat And Top In Approved Granite With Full Moulding,Counter With Drawers And Shutters From 18 Mm Thick Bwr Grade Plywood And Finished With Decorative 1Mm Laminate On Exposed Faces And Inner Faces Conforming To Is 303. Total 32 Drawers Of 600 Mm (W) Mounted On Telescopic Channels And 5 Shutters Complete With Locking Arrangement, Handles, Fittings, Fixtures And Hardware . Complete With Fittings, Fixtures And Hardware As Directed By Engineer-In-Charge. 34 Providing And Supplying Display Rack Of Overall Size 1500 Mm (H) × 900 Mm (L) × 450 Mm (W), Comprising Five-Tier Rack Fabricated From 50 Mm × 25 Mm Ms Rectangular Hollow Sections Of Minimum 1.2 Mm Thickness With Powder-Coated Finish, Complete With Heavy-Duty Swivel Castor Wheels And Fifteen Storage Boxes With Top-Hung Outward Opening Shutters, Fittings, Fixtures And Hardware Complete As Directed By Engineer-In-Charge. 35 Providing, Fabricating And Fixing Conference Table Of Overall Size 2400 Mm (L) × 1200 Mm (W) × 750 Mm (H), Fabricated From 18 Mm Thick Bwr Grade Plywood Conforming To Is 303, Finished With High-Pressure Laminate (Hpl) To Table Top And Approved Decorative Laminate To Vertical Members.Table Top With 12 Mm Glass Thick Toughened Glass Having Machine Polished Edges. Exposed Top Edges Shall Be Finished With 22 Mm × 1.3 Mm Pvc Edge Banding And Vertical Members With 22 Mm × 2 Mm Pvc Edge Banding Using Pur Adhesive. Complete With Modesty Panel, Fittings, Fixtures And Hardware, Fixed In Position As Per Approved Drawings And As Directed By Engineer-In-Charge. 36 Providing And Supplying Café Chair Of Overall Size 440 Mm (W) × 430 Mm (D) × 785 Mm (H) With Seat Height 455 Mm, Comprising 12 Mm Thick Hot-Pressed Plywood Seat Mounted On Ss 304 Tubular Frame Fabricated From 25 Mm Diameter Tubes Complete With Hard Rubber Bushes, Welded Joints, Fittings And Accessories, Finished And Placed In Position As Directed By Engineer-In-Charge.. 37 Providing And Fixing Notice Board Of Approved Size, Fabricated From 6 Mm Thick Marine Plywood Conforming To Is 710 As Backing With 12 Mm Thick Soft Board Covered With Approved Tapestry Fabric, Finished With Seasoned Hardwood Lipping And Moulding. Timber And Plywood Shall Be Treated With Approved Anti-Termite Preservative Before Assembly. Complete With Fixtures, Fittings, Polishing And Hardware, Fixed In Position As Per Approved Drawings And As Directed By Engineer-In-Charge. 38 Providing And Fixing Magnetic Writing Board Of Overall Size 2440 Mm × 1220 Mm, Comprising Vitreous Enamel/Ceramic Coated Magnetic Steel Writing Surface Mounted On Moisture-Resistant Backing And Enclosed In Anodized Aluminium Frame Complete With Marker Tray, Fixing Brackets, Fixtures And Accessories, Fixed In Position As Directed By Engineer-In-Charge. 39 Providing And Fixing Display Board Of Size 450 Mm × 300 Mm Fabricated From 4 Mm Thick Clear Cast Acrylic Sheet Mounted On Powder-Coated Ms Frame With Approved Vinyl Lettering/Uv Printed Graphics As Approved. Complete With Stainless Steel Fasteners, Fixtures And Accessories, Fixed In Position As Directed By Engineer-In-Charge 40 Providing And Fixing Photoluminescent Safety Signage Of Size 400 Mm × 400 Mm Fabricated From Self-Adhesive Photoluminescent Sheet Of Approved Quality With Screen-Printed Safety Symbols And Lettering, Complete With Surface Preparation, Fixing And All Accessories, In Accordance With Approved Drawings And As Directed By Engineer-In-Charge. 41 Providing, Fabricating, Supplying And Fixing High Emboss Wall Sculpture Of Approved Design, Size And Profile As Shown In Approved Drawings, Manufactured From Minimum 5 Mm Thick Fibre Reinforced Plastic (Frp) Using Isophthalic Resin With Minimum Two Layers Of Chopped Strand Mat Over Approved Mould, Complete With Ms Supporting Framework Fabricated From Minimum 25 Mm × 25 Mm × 2.0 Mm Square Hollow Sections, Epoxy Zinc-Rich Primer And Two Coats Of Synthetic Enamel Paint. The Work Shall Include Preparation Of Clay Model, Pop Mould, Frp Casting, Surface Finishing, Frp Primer, Pu Decorative Finish Of Approved Shade, Integrated Light Fittings (Where Shown), Erection, Scaffolding, Transportation, Hoisting, All Leads And Lifts, Complete As Directed By Engineer-In-Charge. 42 Providing, Fabricating, Supplying And Fixing Frp Statue Of Male And Female Farmer (Life Size)As Shown In Approved Drawings, Manufactured From Minimum 5 Mm Thick Fibre Reinforced Plastic (Frp) Using Isophthalic Resin Over Approved Mould With Ms Supporting Framework Fabricated From Minimum 25 Mm × 25 Mm × 2.0 Mm Square Hollow Sections. The Work Shall Include Clay Modelling, Mould Preparation, Frp Casting, Surface Finishing, Primer, Pu Decorative Coating Of Approved Shade, Erection, Scaffolding, Transportation, Hoisting And All Incidental Works Complete As Directed By Engineer-In-Charge. 43 Providing, Fabricating, Supplying And Fixing Frp Statue Of Bengal Tiger (Life Size)As Shown In Approved Drawings, Manufactured From Minimum 5 Mm Thick Fibre Reinforced Plastic (Frp) Using Isophthalic Resin Over Approved Mould With Ms Supporting Framework Fabricated From Minimum 25 Mm × 25 Mm × 2.0 Mm Square Hollow Sections. The Work Shall Include Clay Modelling, Mould Preparation, Frp Casting, Surface Finishing, Primer, Pu Decorative Coating Of Approved Shade, Erection, Scaffolding, Transportation, Hoisting And All Incidental Works Complete As Directed By Engineer-In-Charge. 44 Providing, Fabricating, Supplying And Fixing Frp Statue Of Bison (Life Size)As Shown In Approved Drawings, Manufactured From Minimum 5 Mm Thick Fibre Reinforced Plastic (Frp) Using Isophthalic Resin Over Approved Mould With Ms Supporting Framework Fabricated From Minimum 25 Mm × 25 Mm × 2.0 Mm Square Hollow Sections. The Work Shall Include Clay Modelling, Mould Preparation, Frp Casting, Surface Finishing, Primer, Pu Decorative Coating Of Approved Shade, Erection, Scaffolding, Transportation, Hoisting And All Incidental Works Complete As Directed By Engineer-In-Charge. 45 Providing, Fabricating, Supplying And Fixing Frp Statue Of Sambar (Life Size)As Shown In Approved Drawings, Manufactured From Minimum 5 Mm Thick Fibre Reinforced Plastic (Frp) Using Isophthalic Resin Over Approved Mould With Ms Supporting Framework Fabricated From Minimum 25 Mm × 25 Mm × 2.0 Mm Square Hollow Sections. The Work Shall Include Clay Modelling, Mould Preparation, Frp Casting, Surface Finishing, Primer, Pu Decorative Coating Of Approved Shade, Erection, Scaffolding, Transportation, Hoisting And All Incidental Works Complete As Directed By Engineer-In-Charge. 46 Providing, Fabricating, Supplying And Fixing Frp Statue Of Sloth Bears (Life Size)As Shown In Approved Drawings, Manufactured From Minimum 5 Mm Thick Fibre Reinforced Plastic (Frp) Using Isophthalic Resin Over Approved Mould With Ms Supporting Framework Fabricated From Minimum 25 Mm × 25 Mm × 2.0 Mm Square Hollow Sections. The Work Shall Include Clay Modelling, Mould Preparation, Frp Casting, Surface Finishing, Primer, Pu Decorative Coating Of Approved Shade, Erection, Scaffolding, Transportation, Hoisting And All Incidental Works Complete As Directed By Engineer-In-Charge. 47 Providing, Fabricating And Fixing Ferrocement Decorative Architectural Railing Of Height 900Mm Of Approved Design And Profile, Comprising 25–40 Mm Thick Cement Mortar (1:2) Reinforced With Minimum Two Layers Of Galvanized Welded Wire Mesh/Chicken Mesh Securely Tied To Reinforcement Framework, Finished Smooth And Coated With Approved Exterior Grade Primer And Acrylic Paint Of Approved Shade. The Item Shall Include Reinforcement, Mesh, Formwork, Scaffolding, Curing, Transportation, Labour, Fixtures, Fittings And All Incidental Works Complete As Per Approved Drawings And As Directed By Engineer-In-Charge 48 Providing Artistic Wall Painting On Prepared Surface Using Approved Exterior Grade Acrylic Paints In Multi-Colour Theme As Per Approved Artwork And Design, Including Surface Preparation, Primer, Painting By Skilled Artists, Finishing With Matt Polyurethane (Pu) Clear Protective Coat Of Approved Make For Weather Resistance, Scaffolding, Labour, Materials, Tools And All Incidental Works Complete As Directed By Engineer-In-Charge. 49 Providing, Supplying And Fixing Traditional Brass Samai Of Overall Height 1600 Mm , Manufactured From Solid Cast Brass With Five-Tier Oil Lamp Arrangement And Decorative Brass Peacock Finial At Top, Polished And Lacquer Coated, Complete With Transportation, Handling, Erection, Anchoring Arrangement, Labour And All Incidental Charges, Fixed In Position As Per Approved Drawings And As Directed By Engineer-In-Charge. 50 Providing, Supplying And Fixing Brass Nataraj Idol Of Overall Height 1500 Mm (5-0\) And Overall Diameter 1200 Mm, Weighing Not Less Than 75 Kg, Manufactured From Solid Cast Brass Of Approved Quality With Polished And Lacquer-Coated Finish. The Item Shall Include Transportation, Handling, Erection, Anchoring Arrangement, Labour, Tools, Lifting Equipment And All Incidental Charges Complete, Fixed In Position As Per Approved Drawings And As Directed By Engineer-In-Charge. 51 Providing, Supplying And Fixing Glass Reinforced Concrete (Grc) Cornice Of Size 450 Mm × 450 Mm And Approved Profile, Manufactured Using White Cement, Graded Silica Sand, Approved Polymer Modifiers, Superplasticizer And Alkali Resistant (Ar) Glass Fibres, With Minimum 15 Mm Average Thickness Or As Per Structural Design. Panels Shall Be Cast In Approved Moulds, Properly Cured And Fixed Over Galvanized/Ms Supporting Framework With Stainless Steel Anchors, Complete With Scaffolding, Centering, Transportation, Erection, Joint Treatment, Finishing And All Incidental Works As Directed By Engineer-In-Charge. 52 Providing And Fixing Glass Reinforced Concrete (Grc) Decorative Arches, Mahirap Or Other Architectural Decorative Elements As Per Approved Drawings, Manufactured Using White Cement, Graded Silica Sand, Approved Polymer Modifiers, Superplasticizer And Alkali Resistant (Ar) Glass Fibres, With Minimum 15 Mm Average Thickness Or As Per Structural Design. Panels Shall Be Cast In Approved Moulds, Properly Cured And Fixed Over Galvanized/Ms Supporting Framework With Stainless Steel Anchors, Complete With Scaffolding, Centering, Transportation, Erection, Joint Treatment, Finishing And All Incidental Works As Directed By Engineer-In-Charge. 53 Providing, Supplying And Fixing Glass Reinforced Concrete (Grc) Corbels Of Size 300 Mm (W) × 450 Mm (D) And Approved Profile,Manufactured Using White Cement, Graded Silica Sand, Approved Polymer Modifiers, Superplasticizer And Alkali Resistant (Ar) Glass Fibres, With Minimum 15 Mm Average Thickness Or As Per Structural Design. Panels Shall Be Cast In Approved Moulds, Properly Cured And Fixed Over Galvanized/Ms Supporting Framework With Stainless Steel Anchors, Complete With Scaffolding, Centering, Transportation, Erection, Joint Treatment, Finishing And All Incidental Works As Directed By Engineer-In-Charge. 54 Providing, Supplying And Fixing Glass Reinforced Concrete (Grc) Capital For Rcc Columns Of 450 Mm Diameter, Overall Size 450 Mm (W) × 600 Mm (D),Manufactured Using White Cement, Graded Silica Sand, Approved Polymer Modifiers, Superplasticizer And Alkali Resistant (Ar) Glass Fibres, With Minimum 15 Mm Average Thickness Or As Per Structural Design. Panels Shall Be Cast In Approved Moulds, Properly Cured And Fixed Over Galvanized/Ms Supporting Framework With Stainless Steel Anchors, Complete With Scaffolding, Centering, Transportation, Erection, Joint Treatment, Finishing And All Incidental Works As Directed By Engineer-In-Charge. 55 For Auditorium 56 Providing, Supplying And Fixing Of Acoustical Baffles (Class B Sound Absorption) Of Compressed Fiberglass Core With White/Coloured Finish Of Size 1200 X 500 X 40 Mm Thick Having Density Of 110Kg/Cum. Spaced @ 40Mm C/C.(The Area Of Baffles Provided At Site To Be Measured For Payment). The Baffles To Be Hanged From Ceiling As Per The Guidlines Of Manufacturer. Cost Inclussive Of All Materials, Labours, Accessories, Ancillary Components, Scaffolding Etc Complete In All Respect As Per Approved Drawing, Design, Specification And Direction Of Engineer In Charge. The Cost Inclussive Of All Materials, Labours,Accessories, Ancillary Components, Scaffolding Etc Complete In All Respect As Per Approved Drawing, Design, Specification And Direction Of Engineer In Charge. 57 Providing Providing, Fitting And Fixing Of Stretch Ceiling Comprising Of Pvc Membrane Of German Make Duly Welded Wit H Pvc Harpoon And Aluminium Europrofiles In Anodised Finish. Installation By Using Heat Stretching Method Should Be Free From Wrinkles And Any Visible Sag. The Pvc Stretch Ceiling Production Should Be From An Iso Certified Plant And Should Be Located Within India . The Stretch Ceiling Should Be Warranted For 10 Years Against Any Manufacturing Defect.General Specification Of Pvc Membrane : Basic Formulation Should Be Free From Phthalates. Thickness 0.17+- 10% , Weight Approx. 180 Gms/Sqmtr , Dimensional Stability Between -15 Deg Cel To +45 Deg Cel , 100% Recyclable. It Should Have Certified Low Heavy Metal Migration ( Rohs Directive Compliance ) And Conform To European A+ Emmission Norms And B-S2-D0 In Acc.With Din En 14716 Fire Safety Norms.Pvc Membrane Color And Finish : Plain Fabriclight Transmission & Reflection : Upto 77% & 57.8% Respectivelyaluminium Profile Finish: Anodisededge Finish : White/Black Pvc Beading To Cover The Profile Edges.Certifications : (Fire Rating, Heavy Metal, Emission , Iso & Warranty) Including Proof Of Purchase/Association From/With The Approved Pvc Manufacturer Are To Be Furnished Along With The Offer. Providing And Fixing Of Ply Boxing Made Up Of 18Mm Ply With 150Mm Depth And Base Ply As 12Mm Fixed Over To Ceiling To House Thelighting And Installationof Stretch Ceiling.Ply Box To Be Finished Internallywith Two Coats Of White Paint Or Laminate.Provision For Electrical Wiring In The Box And Near The Driver Location(Location To Be Outside The Box At Accessible) Be Provided.Cost To Include All Necessary Hardware, Accessories And Finishing.Finishing Of The Box Externally As Per Direction.Supply And Installation Of Led Block Lighting System [On/Off]Osram Chip 1.08W Led+Meanwell Drivers4000K Led.Driver- 60/100/150/200/320 58 Providing, Supplying And Fixing Of Suspended Rigitone Activ’Air 8/18 Ceiling Includes 20X28X30X0.5Mm Channel {Material-Gi(Is513),Ys- 260Mpa,Finish-Galvanised 150Gsm(Is277)} Is Fixed Along The Perimeter Of Existing Wall With The Help Of Hilti Hps - 1 (6X40) Impact Anchor At 600Mm Centres. 25X10X0.5Mm Ceiling Angle {Material-Gi(Is513),Ys-260Mpa,Finish-Galvanised 150Gsm(Is277)} Is Suspended By Fixing It To The 27X37X25X1.6Mm Soffit Cleat {Gi(Is513)Ys-260Mpa,Finish-Galvanised 120Gsm(Is277)}. Soffit Cleat And Gyproc Rawl Plug- Ø8X45Mm {Material-Is 513 Cr1 Grade, Zinc Coating (7 To 8 Microns) Pull Out Load- 6.8Kn For M30 Concrete Grade} Creating 1000Mm X 900Mm Grid. 15X45X15X0.9Mm Intermediate Channel {Material Gi(Is513),Ys-260Mpa,Finish-Galvanised 150Gsm(Is277) Fixed To The Ceiling Angle At Every 1000Mm C/C} And Ceiling Angle Is Fixed At Every 900Mm Along The Length Of Intermediate Channel With M6 X 12Mm Hex Bolt & Nut Arrangement {Material–As Per En 10083 Finish – Zinc Plating} Or With 2 Nos Of Ø4.2X13 Metal To Metal Screw {Material-Carbon Steel En-Iso 7049/50 Finish- Zinc Coating Thickness- 4.14Micron.}. 80X26X0.5Mm Ceiling Section {Material-Gi (Is513),Ys-260Mpa,Finish-Galvanised 150Gsm(Is277)} Is Then Fixed To The Intermediate Channel {Material-Gi(Is513),Ys-260Mpa, Finish-Galvanised 150Gsm(Is277)} With The Help Of Connecting Clip {Material -High Carbon Spring Steel Wire(Bs970Gr.En42),46- 48Hrc,Finish-Zinc Plating 4-6 Micron} And In Direction Perpendicular To The Intermediate Channel At 333Mm C/C. Boarding Shall Start From The Center Of Ceiling Area. Single Layer 12.5Mm Rigitone Activ’Air 8/18 Board Of Size 1188X1998Mm Having All Four Square Edges, 15.5% Perforation Area Of Board & Hole Size Of 8Mm Diameter At A C/C Of 18Mm; Backed With Acoustic Tissue, Having Nrc Values 0.55, Is Then Screw Fixed To Ceiling Section With 30Mm Rigitone Screws/25Mm Drywall Screws {Material-Carbon Steel En-Iso 7049/50,Finish-Case Hardened Grey Phosphating} At 170Mm Centres. For Higher Nrc Value, Resin Bonded Glass Wool Of 24Kg/M3 And 50Mm Thick Can Be Placed On Top Of The Board ( Refer Rigitone Activ’Air 8/18- Pds For The Nrc Values). Finally All Square Edges Of The Boards Are To Be Jointed And Finished So As To Have A Flush Look. The Joint Filling Using Vario Joint Filler And Rigitone Joint Filler Set Technique Should Be Employed For The Joint-Less Installation Of Rigitone Perforated Boards With Continuous Perforation. After Installation And Joint-Filling, The Boards Should Be Primed And Then Painted With A Short Haired Paint Roller. Paint Should Not Be Applied Using A Brush Or Spray Diffuser . Serrated Steel Section Has Effective Thickness Of 2T (2Xdepth), Better Load Carrying Capacity, Enhanced Screw Retention, Improved Acoustic Performance & Fire Resistance As Compared To Plain Steel Section.As Per Approved Drawing, Design, Specification And Direction Of Engineer In Charge. 59 Providing, Fitting And Fixing Of Wpc Fluted Louvers As Wall Paneling Over Required Base Frame Of Aluminium/Ply Including Cost Of All Materials, Labours, Accessories, Ancillary Components, Scaffolding Etc Complete In All Respect As Per Approved Drawing, Design, Specification And Direction Of Engineer In Charge. 60 Providing, Fitting And Fixing Of Petstrip(Single Slat/Double Slat) Having Size Of 2400*600*12Mm(+/-2Mm)Thk,Backing Of 12Mm Pet Panel With Front Facia Of 1Mm Laminate. The Product Usage For Absorption Of Medium And High Frequency Range With Nrc Of 0.5 Direct Fix.Non-Toxic,Non-Irritant And Fire Compliance With Safety Standards Confirm As Per Bs476 Part 6 Passes(Fire Propogation) And Part 7 Class2 (Surface Spread Of Fame),For Interior Applications.The Product Should Be 00% Make In Indiaand Oem Must Have Iso Certifications-Complying To Igbc Membership.[Pls Note: Ply/Aluminimu Substructure Not Included,Polyesterwool 1000Gsm50Mm-Design, Specification And Direction Of Engineer In Charge. 61 Providing And Fixing Decorative Ceiling Box Made Of 12 Mm Bwr Grade Plywood Conforming To Is 303 Grade Framework And Cladding, Suspended From The Roof Using Gi/Ms Hangers And Supporting Framework As Required. The Exposed Surfaces Shall Be Finished With 4 Mm Thick Natural Veneer, Duly Pasted With Approved Adhesive, Sanded Smooth And Finished With Melamine Polish Polish (Minimum Three Coats) To Achieve A Uniform Appearance. All Exposed Edges Shall Be Finished With Matching Veneer Lipping. The Item Shall Include Necessary Screws, Cleats, Brackets, Edge Banding, Hardware, Scaffolding, Cutting, Fitting Around Services, And All Labour And Materials Complete As Per Approved Drawings And The Direction Of The Engineer-In-Charge. 62 Providing And Fixing Plain Glass Wool Insulation Rolls Of Approved Make , Having 48 Kg/M³ Density And 50 Mm Thickness,Thermal Conductivity: ≤ 0.040 W/M·K At 24°C, Supplied In Roll Form Of Approximate Size 1.20 M × 7.50 M (ManufacturerS Standard Size May Vary). The Insulation Shall Be Non-Combustible, Moisture Resistant, Chemically Inert, Rot-Proof, And Suitable For Thermal And Acoustic Insulation Applications. The Rolls Shall Be Laid Continuously With Tightly Butted Joints And Fixed As Per ManufacturerS Recommendations, Complete With All Necessary Accessories, Labour, Handling, Cutting, And Wastage, Complete In All Respects. 63 Providing And Fixing Bird Spikes (Bird Pro System) Of Approved Make, Manufactured From Uv-Stabilized Polycarbonate (Pc) Base With Grade Ss 304 Stainless Steel Spikes, Suitable For Preventing Pigeons And Other Birds From Roosting On Ledges, Parapets, Beams, Signboards, Lighting Fixtures, Window Sills, Ducts, Pipes, And Other Building Projections. The Spikes Shall Be Securely Fixed Using Approved Weather-Resistant Adhesive And/Or Stainless Steel Screws With Plugs, Complete With All Necessary Accessories, Surface Preparation, Labour, Tools, Scaffolding/Lifting Arrangements, And Installation As Per The ManufacturerS Recommendations, Complete In All Respects. 64 For Outdoor Light 65 Pproviding, Supplying, Installing, Testing & Commissioning Of 12.00 M High Decorative Heritage Cast Iron Lighting Pole With 2 Arms Fabricated In Modular Cast Iron Sections With Bottom Od 320–350 Mm, Top Od 110–120 Mm, 550–650 Mm Dia Decorative Base Flange, Ornamental Scroll Arms (900–1000 Mm Projection), Complete With 2 Nos. Heritage-Style Ip66 Led Lanterns Of 100 W Each, Fg260 Cast Iron Construction,Anchor Bolts, Internal Frls Copper Wiring, Inspection Door, Hot Dip Galvanized Hardware, Hot Dip Galvanized Foundation Bolts, Double Earthing, Non-Shrink Grouting, Powder Coated Finish, Testing And Commissioning Complete As Per Approved Drawings, ManufacturerS Specifications And Engineer-In-ChargeS Directions. 66 Pproviding, Supplying, Installing, Testing & Commissioning Of 12.00 M High Decorative Heritage Cast Iron Lighting Pole With 1 Arms Fabricated In Modular Cast Iron Sections With Bottom Od 320–350 Mm, Top Od 110–120 Mm, 550–650 Mm Dia Decorative Base Flange, Ornamental Scroll Arms (900–1000 Mm Projection), Complete With 1 Nos. Heritage-Style Ip66 Led Lanterns Of 100 W Each, Fg260 Cast Iron Construction,Anchor Bolts, Internal Frls Copper Wiring, Inspection Door, Hot Dip Galvanized Hardware, Hot Dip Galvanized Foundation Bolts, Double Earthing, Non-Shrink Grouting, Powder Coated Finish, Testing And Commissioning Complete As Per Approved Drawings, ManufacturerS Specifications And Engineer-In-ChargeS Directions. 67 Providing, Supplying, Installing, Testing & Commissioning Of 6.00 M High Decorative Heritage Cast Iron Lighting Pole With 2 Arms Manufactured From Fg260 Grade Cast Iron In Modular Construction With Overall Height 6000 Mm, Bottom Od 220–250 Mm, Top Od 90–100 Mm, Decorative Base Dia. 420–500 Mm, Complete Ornamental Scroll Arms (700–800 Mm Projection), Three (02) Heritage-Style Ip66 Led Lanterns Of 60 W Each With Toughened Glass Diffuser, Internal Frls Copper Wiring, Weatherproof Terminal Box, Inspection Door, M24 Hot Dip Galvanized Anchor Bolts, Double Earthing, Non-Shrink Grouting, Pu/Polyester Powder-Coated Finish, Testing And Commissioning Complete As Per Approved Drawings, ManufacturerS Specifications And Directions Of The Engineer-In-Charge. 68 Providing, Supplying, Fabricating, Transporting, Installing And Commissioning An Interactive Scaled Architectural Model Of The Complete Campus Of Approximate Overall Size 3000 Mm × 1800 Mm (Final Dimensions As Per Approved Drawings) With Model Height Varying From 10 Mm To 600 Mm, Prepared To A Scale Of 1:100 (Or 1:50 Wherever Approved By The Engineer-In-Charge), Accurately Depicting The Complete Campus With All Architectural, Structural, Landscape And Utility Components As Shown In The Approved Master Plan And Drawings. The Model Shall Be Fabricated Using Laser-Cut Acrylic Sheets Of Suitable Thickness With Cnc/3D Fabricated Components Wherever Required, Finished With Approved Pu Paint And Provided With An Interactive Led Lighting System Complete With Concealed Wiring, Electronic Controller And Remote Operation. The Completed Model Shall Be Enclosed With Minimum 6 Mm Thick Clear Toughened Safety Glass Supported On A Powder-Coated Ms/Aluminium Framework With Lockable Access Arrangement And Shall Include One Presentation Pointer Of Approximately 900 Mm Length. The Item Shall Include Preparation Of Shop Drawings, Sample Approval, Fabrication, Transportation, Installation, Testing, Commissioning, Demonstration, All Materials, Labour, Tools, Accessories, Taxes, All Leads And Lifts, Complete As Per Approved Drawings And As Directed By The Engineer-In-Charge. The Department Shall Provide The Approved Campus Layout And Building Drawings. 69 Providing, Fabricating, Supplying, Erecting, Testing And Commissioning (Sitc) Of Naturally Ventilated Polyhouse Of Overall Size 10.0 M × 20.0 M, Comprising Hot-Dip Galvanized Tubular Steel Structure Fabricated From Suitable Gi Sections With Minimum 300 Gsm Zinc Coating, Including Columns, Trusses, Purlins, Bracings, Gutters, Foundation Insert Pipes, Anchor Fasteners, Nuts, Bolts, Clamps And All Structural Accessories. The Polyhouse Shall Be Covered With 200 Micron Uv-Stabilized Multilayer Polyethylene Film Conforming To Is 15827:2009, Complete With Uv-Stabilized Insect-Proof Net, Uv-Stabilized Shade Net, Side And End Ventilation System With Roll-Up Curtain Arrangement, Aluminium Locking Profiles With Gi Spring Inserts, Entrance Door Of Frp/Polycarbonate Or Approved Equivalent, Rcc Foundations Of Suitable Grade And Dimensions, Drainage Arrangement, All Fixing Materials, Transportation, Loading, Unloading, Erection, Alignment, Testing, Commissioning And All Incidental Works, Complete As Per Approved Drawings, Nhm/Midh Technical Specifications And As Directed By The Engineer-In-Charge. 70 Providing And Fixing In Position Acrylic Velvet Main Stage Curtain In Two Pieces Of Approved Colour, Shade, Make And Manufacturer As Per Requirement And Detailed Design. The Curtain Shall Be Provided With Minimum 600 Mm (2 Ft) Overlap At Centre, With 50% Fullness/Folds And Minimum 125 Mm (5 Inch) Satin Border At Bottom.The Curtain Shall Be Provided With Satin Lining On The Backside And Decorative Fringe (Zalar) Of Minimum 80 Mm (3 Inch) Size Or As Required. The Curtain Shall Be Suspended From Suitable Track System With Runners, Supported By 25 Mm (1 Inch) M.S. Rings, Complete With Required Bottom Weighting Arrangement To Maintain Proper Drape And Tension.The Item Shall Include All Necessary Tracks, Runners, Rings, Hooks, Weights, Stitching, Lining, Fixing Arrangements, Hardware, Accessories, Installation, Adjustment And Finishing Complete In All Respects, Including All Taxes, As Per Approved Drawings, Specifications And As Directed By The Engineer-In-Charge. 71 Providing And Fixing In Position Main Curtain Frill With Golden Fringe Made Of Approved Quality Velvet Cloth Or As Per Site Requirement, Of Approved Colour, Shade, Make And Manufacturer, Complete With Decorative Golden Fringe At The Bottom Edge.The Work Shall Include Fabrication, Stitching, Fitting, Cleaning, Handling, All Necessary Fixing Arrangements, Supports, Accessories, Labour, Leads And Lifts, And All Other Incidental Works Required For Proper Installation And Finishing Of The Curtain Frill.The Item Shall Be Complete In All Respects Including All Taxes, Materials And Workmanship As Per Approved Detailed Design, Drawings And Specifications, And As Directed By The Engineer-In-Charge. 72 Providing And Fixing Of Removable Sliding Side Wings Fabricated From M.S. Frame Of Size 100 Mm × 40 Mm With Three Intermediate M.S. Bracket Supports At Corners As Per Approved Design And Drawing. The Side Wings Shall Be Provided With Fibre Rollers At Bottom For Smooth Sliding Operation And Mobility.The Frame Shall Be Covered With Best Quality Tapestry Cloth Of Approved Colour, Shade, Pattern, Make And Manufacturer, Properly Stretched And Fixed On The Frame To Achieve A Neat And Finished Appearance.The Item Shall Include All Necessary Fabrication, Welding, Finishing, Fixing Arrangements, Rollers, Brackets, Fasteners, Fixtures, Transportation, Installation, Labour And Other Accessories Required For Complete Installation Of Sliding Side Wings Of Required Size.The Work Shall Be Complete In All Respects Including All Taxes, Duties And Incidental Charges As Per Approved Detailed Design, Drawings, Specifications And As Directed By The Engineer-In-Charge. 73 Providing And Fixing Of Mid And Rear Stage Curtain Made Of Tapestry/Drill Cloth Stretched Flat, Of Approximate Size 18.5 M × 5.5 M, Fixed On Gi Pipe With Corner Weight System As Per Approved Design And Drawing.The Curtain Shall Be Fabricated Using Best Quality Tapestry Cloth Of Approved Colour, Shade, Pattern, Make And Manufacturer And Shall Include The Following Components:A) 80 Mm × 25 Mm (3\ × 1\) Deodar Wood Battens At Top And Bottom Of Curtain For Proper Support And Finishing.B) Curtain Ribbons For Connecting Curtain To The Hanging Gi Pipe.C) Nawar Border At Top And Bottom For Reinforcement And Neat Finish.D) Cover Curtain As Above With Approved Fire-Retardant/Fireproof Cloth Wherever Specified.The Item Shall Include All Necessary Cutting, Stitching, Stretching, Fixing Arrangements, Gi Pipe Support Arrangement, Corner Weight System, Battens, Ribbons, Borders, Hardware, Accessories, Installation, Labour, Transportation, Leads And Lifts, Complete In All Respects.The Work Shall Include All Taxes, Duties And Incidental Charges As Per Approved Detailed Design, Drawings And Specifications, And As Directed By The Engineer-In-Charge. 74 Providing, Fixing, Testing And Commissioning Of Main Center Parting Mechanism For Operation Of Main Stage Curtain, Generally Known As Horizontal Curtain Equipment System, Complete As Per Approved Design, Drawings And Specifications.The System Shall Comprise Of The Following Components:A) 1 Hp, 3 Phase Electric Motor Suitable For Curtain Operation.B) M.S. Drum For Winding Of Steel Wire Rope.C) 3 Mm Dia. Steel Wire Rope Complete With Required Accessories.D) Teakwood Planks Of Required Size, Length And Quantity.E) Aluminium \C\ Track Of Required Length And Quantity.F) Nylon Wheel Runners With M.S. Flats Between Wheels For Smooth Curtain Movement.G) M.S. Brackets For Fixing Teakwood Planks To Concrete Beams.H) Guide Pulleys Complete With Fixing Arrangements.I) Required Limit Switches For Automatic Stopping Operation.J) 2.5 Sq.Mm × 7 Core Electrical Cable As Required.K) Required M.S. Plates For Fixing And Operation Of Limit Switches With Mechanism.L) Connectors And Other Accessories As Required At Site.The Item Shall Include Complete Fabrication, Assembly, Fixing, Alignment, Electrical Connections, Wiring, Installation, Testing, Commissioning, Adjustment Of Curtain Travel Limits, All Required Hardware, Accessories, Labour, Transportation, Leads And Lifts For Smooth And Safe Operation Of The Curtain System.The Work Shall Be Complete In All Respects Including All Taxes And Duties As Per Approved Detailed Design, Drawings And Specifications, And As Directed By The Engineer-In-Charge. 75 Providing, Making And Supplying Of Rostrum Speech Table Of Required Size Fabricated From 19 Mm Thick Plywood Conforming To Is 710, With Approved Quality Laminated Finish And Overall Height Of Approximately 1.07 M.The Item Shall Include Complete Fabrication, Cutting, Assembly, Finishing, Edge Treatment, Fixing Arrangements, Hardware, Accessories And All Necessary Materials Required For A Neat And Durable Finished Rostrum Speech Table.The Work Shall Include Transportation, Handling, Installation/Placement, Labour, All Necessary Arrangements, Taxes And Duties, Complete In All Respects As Per Approved Details, Specifications And As Directed By The Engineer-In-Charge. 76 Providing And Fixing Of Make-Up Counter With Drawers And Mirror Of Approved Size And Design, Fabricated Using 19 Mm Thick Waterproof Plywood Conforming To Is 710 For Counter Top, Drawer Face And Box Frame Construction. The Drawer Sides, Bottom, Back And Complete Rear Portion Of Counter Shall Be Made From 12 Mm Thick Waterproof Isi Grade Plywood.The Drawers Shall Be Provided With 18\ Telescopic Drawer Channels For Smooth Operation And Fitted With 4\ Stainless Steel Handles On Drawer Fronts. All Exposed Plywood Edges Shall Be Finished With 1\ × 1/4\ Teakwood Lipping With Proper Fixing And White Zinc Polishing.The Counter Shall Be Finished With 1 Mm Thick Approved Quality Laminate, Complete With Suede Teakwood Skirting Of Section Size Approximately 5\ × 2\ For Main And Small Tables. The Work Shall Include Provision Of Mirror, Necessary Supports, Hardware And All Required Accessories.The Item Shall Include All Necessary Nails, Screws, Fevicol/Approved Adhesive, Araldite, Abro Tape, Stainless Steel Fastening Fixtures, Polishing Materials, Transportation, Fabrication, Installation, Labour, Taxes And Duties Required For Complete Finishing And Satisfactory Operation.The Work Shall Be Carried Out As Per Approved Drawing, Design And Specifications, Including Measurement As Per Approved Elevational Plan, Complete In All Respects As Directed By The Engineer-In-Charge. 77 Providing And Fixing Artificial Grass Turf Of Approved Make, 25–35 Mm Pile Height, Uv Stabilized Polyethylene (Pe) Monofilament Yarn With Polypropylene Backing, Minimum 16,000 Stitches/Sq.M, Pile Weight Not Less Than 1000 Gsm, Total Weight Approx. 2.0–2.8 Kg/Sq.M, Having Perforated Backing For Drainage. The Turf Shall Be Laid Over Prepared Concrete Surface Using Approved Outdoor-Grade Polyurethane Adhesive, Jointing Tape, Edge Fixing, Trimming, Brushing, And Silica Sand Infill Wherever Recommended By The Manufacturer. The Work Shall Include Cleaning Of The Surface, Complete Installation, Finishing, Labour, Tools & Tackles, Wastage, And All Incidental Works Complete As Directed By The Engineer-In-Charge. Please Enable Macros To View Boq Information