Tender For Construction Of Roads And Drains In The Hanuman Nagar Slums.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Aug 2026
16 days left
EMD
2.05 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Roads And Drains In The Hanuman Nagar Slums.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of sweeper man for cleaning . (Item No. 24a ch-2 SOR-2025-26) |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge.All kinds of soil. ( Item No. 2.6.1 DSR-2023) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) . (SI.No-4.1.8 DSR 2023) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) (SI.No-6.1.1, DSR 2023) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (Item No. 4.1.3 DSR-2023) |
| 6 | 12mm Thick cement plaster 1 cement : 4 Coarse sand (Item No. 13.4.1 DSR-2023) |
| 7 | Road work - Dismantlling lnterlocking tiles tiles work in floors/Roads lald in dry sand including stacking with 50 metre lead for thickness of tile 60mm to 8omm (Ch.-17, Item No. 22 SOR-2023-24) |
| 8 | Earth work in cutting or embankment in ordinary soil, excavation to be in the form of regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20 cm layers including ramming and dressing the surface to required levels and slopes and including 1.50m lift and 30 m lead also including cartage of earth upto 8 kms, cost of earth if any, and royalty etc complete in all respect.(Analsis attached) |
| 9 | Cartage of surplus earth/malva up to 5 Km distance including loading and unloading (SOR 2025-26) |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more (SI.No-5.22A.6, DSR 2023) |
| 11 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (SI.No-5.1.2, DSR 2023) |
| 12 | Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with mortar grader surface, mixing by mix in place method with rotavator at OMC, & compacting with vibratory power roller to achieve the desired density, complete as per clause Table - 400-2 S.N. 4.2 (C) MORT&H specification no- 401 grading size 53.00-26.50 mm @ 35 %, 26.50 - 4.75 mm @ 45 % and 2.36 mm & below @ 20 %. |
| 13 | Supply Laying of 80 mm I Shaped (Zigzag) rubber moulded grey precast Interlocking tiles of thickness 60 to 100mm (Compressive strength not less then 30Mpa and weight 4.50kg) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work. (Cha.-5 S.I No. 17E, SOR 2025-26) |
| 14 | Providing and fixing PVC pipe conforming to lS make working pressure 6 KgiSqCm incuding testing labour T&P and all complete fittinqs (Ch.-23, Item No. 30 SOR-2023-24) (A) 75 mm diameter |
| 15 | (C) 110 mm diameter |
| 16 | (D) 140 mm diameter |
| 17 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (Item No. 18.9.1, DSR-2023) (A) 15 mm nonrinal dia pipes |
| 18 | (B) 20 mm nonrinal dia pipes (Item No. 18.9.2, DSR-2023) |
| 19 | (C) 25 mm nonrinal dia pipes (Item No. 18.9.3, DSR-2023) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender