Tender For Construction Of 200Mm X 165Mm X 150.00M Deep High Yield Drilled Tube Well With Protection Chamber And Electric Motor Pump 2.0 Hp For Dry Collapse Source In Block C Us Raneshwar.
Tender Value
4.92 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
2 days left
EMD
9900
Bank guarantee accepted
Document Fee
750
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dumka → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 200Mm X 165Mm X 150.00M Deep High Yield Drilled Tube Well With Protection Chamber And Electric Motor Pump 2.0 Hp For Dry Collapse Source In Block C Us Raneshwar.
BOQ
| Sl. No. | Item Description |
| 1 | A. Construction of 200mmx165mmx230.00 M Deep High Yield Drilled Tube Well. |
| 2 | HYDT : |
| 3 | Cost of drilling 200mmX165mmX300 Mtr deep bore well in all kinds of soil and rock in rural area for installation of pump bore set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools, drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site. |
| 4 | (a) 0.00m Up to 50.00m depth below G.L. In Rural Areas (DWSD 116) |
| 5 | (b) Above 50.00 m depth. In Rural Areas |
| 6 | Supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe etc. all complete job. (DWSD Item 117) |
| 7 | Supplying all materials, labour, tools & equipments for fitting & fixing 200mm dia MS cap over casing pipe complete job. (DWSD Item 117 B) |
| 8 | B. Bore well Brick Masonry Protection Chamber |
| 9 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-B ) and disposal of excavated earth as obtained to a distance up to 50 m including all lifts,levelling,ramming the foundation trenches, removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I. BCD-5.1.01+5.1.02 |
| 10 | Providing designation 75 A Brick work in C.M(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M.2 to2.5 including providing 10mm thick mortar joints, cost of screening,scaffolding,raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/I. BCD-5.2.03 |
| 11 | Up to Plinth |
| 12 | Providing pre cast R.C.C.M-150 in nominal mix of (1:2:4) slab of desire size with approved quality of stone chips (20mm to 6mm size) graded and clean coarse of F.M 2.5 to 3 including curing (but excluding the cost of reinforcement),taxes and royalty all complete as per building specification and direction of E/I. BCD-5.3.1.2 |
| 13 | Providing T.M.T steel reinforcement of different dia rods as per approved design and drawing including carriage of M.S bars to work site, cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. BCD-5.5.5 |
| 14 | Slab- 10 mm dia - |
| 15 | Slab- 10 mm dia - |
| 16 | Providing 12 mm cement plaster (1:6) with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I. BCD-5.7.03 |
| 17 | Chamber Inner |
| 18 | Column outer Portion |
| 19 | Total |
| 20 | Net Quantity |
| 21 | C : Supplying and Istallation of 2HP Submersible Motor Pump |
| 22 | Supplying 100 mm dia submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and poly-propylene/ noryl impeller. Motor suitable for working on 415V+10%, 3PH, 50 hyZ, A.C supply with cable guard, thrust carbon/ fiber bearing to with stand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cxable in single/double run shall be provided with each pump. (Make KSB/Crompton) |
| 23 | 2.0 HP |
| 24 | Supplying & Commissioning & Installation of 5KVA Stablizer (Range 90V-300V) with cable, change over switch for Submersible pump & Motor etc. all complete Job |
| 25 | Supplying, Flat flexible submersible cable with, copper conductor, PVC insulated, and PVC sheathed. |
| 26 | 3Core 2.5 sq mm in Borewell |
| 27 | Providing safety wire of 5 mm dia. PVC coated |
| 28 | Cost of uPVC pipe 3.00 Mtrs. Long |
| 29 | Cost of 32 mm dia uPVC Column pipe |
| 30 | Supplying & Fitting M.S. Clamp |
| 31 | Supplying and fixing G.I fitting of approved make all |
| 32 | Elbow 32mm dia |
| 33 | Nipple 32mm dia |
| 34 | Union Socket 32mm dia |
| 35 | Tee 32mm dia |
| 36 | Reducung Tee 32x20mm dia |
| 37 | Nipple 32mm dia |
| 38 | Socket 32mm dia |
| 39 | ADD 18% GST |
| 40 | Add 1% L.cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender