Tender For Estimate For Provding & Installtions Of Vacuum Pumps, Construction Of Transformer Shed, Board And Grills For Drainage Trench In Samlah Pharpur Lift Irrigation Scheme At Rd 28000/L Of A.S.H.C In Changer Area Of Shri Anandpur Sahib.
Tender Value
21.07 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
9 days left
EMD
42159
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rupnagar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Provding & Installtions Of Vacuum Pumps, Construction Of Transformer Shed, Board And Grills For Drainage Trench In Samlah Pharpur Lift Irrigation Scheme At Rd 28000/L Of A.S.H.C In Changer Area Of Shri Anandpur Sahib.
BOQ
| Sl. No. | Item Description |
| 1 | Providing. Fixing, Testing & Commissioning of Vacuum Pumpset of 5 HP complete in all respect as per satisfaction of Engineer-in-Charge. |
| 2 | Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. 40mm i/d Brass Ball valves |
| 3 | Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. 20mm i/d Brass Ball valves |
| 4 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipelines complete in all respect. 40mm i/d G.I. Union |
| 5 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipelines complete in all respect. 20mm i/d G.I. Union |
| 6 | Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. 40mm i/d |
| 7 | Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. 20mm i/d |
| 8 | Steel work in built up tubular (round, square or rectangular hollow tubes etc. ISI Marked) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete having span:-Up to 15.00 Mtr. Span |
| 9 | Corrugated G.I. Sheet roofing 0.80 mm thick fixed with galvanized iron J or L hooks 10mm dia, G.I. Limpot and bitumen washers complete excluding the cost of purling rafters and trusses |
| 10 | Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete inall respects. |
| 11 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 12 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 13 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with xtruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In Charge. (Glazing and paneling to be paid for separately) : For fixed portion and chawkhats |
| 14 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screwsor with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In Charge. (Glazing and paneling to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required |
| 15 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. withPVCPlug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item) 1) Float glass panes of 5 mm thickness |
| 16 | Providing and fixing double action hydraulic floor springof approved brand and manufacture IS: 6315marked,for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer boxwithslideplateand with stainless steel cover plate etc. complete as per the direction of Engineer in-charge. |
| 17 | Painting new letters and figures of black synthetic enamel paint to an even shade |
| 18 | Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 markedm make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on themand laying the same in trenches to correct alignment andgradients, cuttingand jointing, testing for water tightness and making good the leakages and defect including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respectsd) 200mm o/d pipe |
| 19 | Excavation by mechanical means(JCB or Hydraulic excavator) in Trenches for pipe line with straight or open cutting in streets or open are including and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, including the cost of diversion for traffic crossing over trenches for access to the houses, watching fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect |
| 20 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing inposition |
| 21 | Tile terracing laid dry over roof consisitng of one layer of tiles 22.86x11.43x3.83 including grouting with cement sand mortar 1:4 top surface to be left clean after wire brushing |
| 22 | XLPE INSULATED ARMOURED CABLES (ON SURFACE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1) 1988 tobe laid (OnSurface) asper PWD General Specifications: Overall size 10 sq.mm (3Core)Armoured (On-Surface) |
| 23 | Front End loader 1 cum bucket capacity |
| 24 | Providing and erecting a \\"W\\"metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail,70cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5m spaced 2 m centre to centre,1.8m high,1. 1mbelowground/roadlevel, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367and IS:1364,metal beam rail to be fixedon the vertical post with a spacer of channel section150x75x5mm, 330 mm long complete as per clause 810 |
| 25 | Any Other Items Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender