Tender For Estimate For Construction Of 1 No. Escape Combined With X-Regulator At Rd 15650 Of Manuke Disty And Construction Of 1 No. Escape At Rd 20450 Of Jassowal Disty
Tender Value
42.19 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
3 days left
EMD
84392
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ludhiana → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Construction Of 1 No. Escape Combined With X-Regulator At Rd 15650 Of Manuke Disty And Construction Of 1 No. Escape At Rd 20450 Of Jassowal Disty
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. |
| 2 | Dismantaling concrete cement concrete plain 1:2:4 |
| 3 | Preparing, watering and ramming surface for laying concrete. |
| 4 | Cement concrete (M-10) with stone ballast mixing by mech. Means using concrete mixer volumetric type. |
| 5 | Cement concrete 1:4:8 mixing by mechanical means using concrete mixer volumetric type |
| 6 | Supplying & laying dry brick ballast. |
| 7 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. |
| 8 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth |
| 9 | Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical and bartering including attached pillasters buttresses etc). Complete in all respect. |
| 10 | Extra for laying earth/ fly ash as per specification for compaction in 20 cm layers, dressing, watering & rolling to specifictions. Complete as all respects. |
| 11 | Dressing of Side Slopes and prepration of sub grade for lining complete in all respect as per pwd specification. |
| 12 | Putting 1:3 (Cement:water) cement slurry with cement @ 2.25 kg per sqm on prepared bed and side slopes before laying concrete on bed and side slopes. |
| 13 | Cement concrete lining 75mm. thick or less laid manually for irrigation channels, using cement concrete M-15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km (FOR TRAPEZOIDAL SECTION AND CUP SECTION OF ALL RADII) |
| 14 | Providing and laying cement concrete M-15 for Sleeper mixed in automatic computerised batching and mixing plant and transported to the site in transit mixers complete in all respect in PWD specifications |
| 15 | Cold twisted deformed bars fe 500 grade for RCC work where not included in the complete rate of RCC i/c bending binding and placing in position |
| 16 | Fillingstonesor spalls intocrate sand hand packing |
| 17 | Weaving wire netting for wire crates including binding sides and partitions to make crate of 15cm x15cm or 25cm x7.5cm mesh. |
| 18 | First class burntbrick work laid in cement sand mortar 1:3 in foundation and plinth |
| 19 | 10mm thick cement plaster 1 : 4 on floors. |
| 20 | Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage, cost of rubber ring D.I. Pipe as per IS 8329 DI-K9 500mm i/d pipe lines laid complete |
| 21 | Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&costof Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge) 500mm i/d Sluice Valves flanged. |
| 22 | Proving & fixing ISI Marked Non return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used insteadof classPN-1.0 ,than5%will be paid extra. 500mm i/d Non-return valve. |
| 23 | Provision & Fixing of 500mm dia 90 degree elbow in all respect |
| 24 | Provision & Fixing of 500mm dia 45 degree elbow in all respect |
| 25 | Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth |
| 26 | Providing, lowering in trenches to correct gradient and alignment, jointing with tyton rubber joint and cutting of reinforced cement concrete spigot and socketed pipes and specials with rubber ring ISI marekd as per IS code IS 458-2003 into trenches for all depths and laying out the same to correct alignment, gradients, levels etc. cutting of concrete beds and joints holes, supporting the pipes and specials in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benchings, haunches and envelopes are completed. The pipes shall rest on the beds at all joints through their lengths and fixing of rubber ring, facing, testing the pipes for leakage and making good the same leakage and all defects to the entire satisfaction of the Engineer-in-charge including all cartage etc. np 2 500 mm |
| 27 | Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. Size 0.9 m. x 0.9 m. |
| 28 | Any other Item Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender