Tender For Restoration Of Remaining Streets With Rmc In B Block In Nihal Vihar Unauthorized Colony Regn No 1086 In Nangloi Jat Ac In Distt West
Tender Value
1.72 Crore
Estimated cost
Bid Submission
29 Jul 2026
2 days left
EMD
3.45 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Remaining Streets With Rmc In B Block In Nihal Vihar Unauthorized Colony Regn No 1086 In Nangloi Jat Ac In Distt West
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and dispos Unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead an per direction of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mia) |
| 3 | Raising of existing manhole up to 60 cm (Av) height by dismantling of CC/RCC cover and frame including brick masonry with bricks of class designation 75 in cement mortar 1:4( 1 cement: 4 coarse sand) plastering inside walls with cement mortar 1:4 (1 cement : 4 coarse sand) with floating coat of neat cement punning 12mm thick including cost of quantities to be execyted in or under foul position complete as per direction of Engineer-in Charge. |
| 4 | Providing and fixing in position pre-cast RCC manhole cover and frame of required shape and approved qualityEHD-35 Circular shape 560 mm interal dia. |
| 5 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, includ jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, [1] Single socketed pipes 75 mm diameter |
| 6 | Providing and laying cement concrete pavement of M-10 with ready mixed concrete from batching plant of repuned cement manufacture and transported to the site of work in transit mixer having continuous agitated mixer, manufactur as per mixed design of M-10 grade of cement concrete work including pumping of RMC from transit mixer to site. Placing in required camber compulsory with plate/screed vibrator with wire brush etc. and curing including cost admiser in recommended proportions as per 15:9103 to accelerate/retard setting of concrete, improve workabilty without TEA impairing strength and durabiltity as per specification and direction of Engineer-in-Charge. Note-1) less cement aned than specified in this item is recoverable seprately.M-10 Grade plain cement concrete by using 220 kg of cement per cum of concrete. |
| 7 | Providing and laying RMC of M-30 grade By using 400kg of cement (43 grade. OPC) per Cum of concrete in roads/streets manufactured in automatic RMC plant using coarse sand and graded stone aggregate of 20mm nominal size in appropriate proportion as per approved design criteria including transportation to site in transit mixer, including cmt ef admixture in recommended proportion as per 159103 to accelerate/ retard setting of concrete to improve workability without impairing strength and durability as per specification including spreading and compacting mechanically by using needle and surface vibrators, leveling to required slope & camber, finishing by floating & brooming with wire brushes etc 1 and curing including making provision for contraction /expansion, construction of cross/ longitudinal joints of siar 10mm wide 50 mm deep by groove cutting machine, providing and filling joints with approved joint filler and sealants etc. complete, as per direction of Engineer-charge (Cost of joint filler & sealants shall be paid for separately under relevant items) |
| 8 | Providing and laying in position bitumen hot sealing compound for expansion joints etc ingrate compound |
| 9 | Manufacturing, supplying and fixing tetro reflective overhead signage boards made up of 2 mm thick face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting to to type of ASTM D-4956-01 as approved by Engineer-In-charge, letters, borders etc as per IRC 67-2001 backing which shall be activated by applying pressure conforming to class II of ASTM D-495601 and in the same white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitiv the plate of structural frame work by means of suitable sized alumidum alloys, rivets or bolts & nuts 300 centre all along the periphery as well as in two vertical rows along with theft resistant measures, including painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including priming coat. The rate includes the cost of rounding off the cornshall be paid for separately under relevant tel Incharge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the shely eantry, fixing and erecting the same in position all complete as per drawings, specification and direction of th be measured for payment). Overhead informatory road signage |
| 10 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc, including weite grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary tandes nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainles bolts etc, of required size, on the top of the floor or the side of waist slab with suitable arrangement as per appw00 Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fond 00 accessories such as nuts, bolts, fasteners etc.). |
| 11 | Dumping Charges of Malba at Rise Eleven Plant Bakkarwala Delhi. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender