Tender For Construction Of Community Hall At Ex-Service League, Nalagarh. Estimated Cost - 10,00,000/- Tender Fees - Rs. 500/- Earnest Money Deposit- 20000/- Time Limit - 3 Months
Tender Value
10 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
1 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Community Hall At Ex-Service League, Nalagarh. Estimated Cost - 10,00,000/- Tender Fees - Rs. 500/- Earnest Money Deposit- 20000/- Time Limit - 3 Months
BOQ
| Sl. No. | Item Description |
| 1 | Brick Work |
| 2 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 3 | 2 Centering and shuttering including strutting, propping etc. and removal of form for :- Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 4 | 2 Centering and shuttering including strutting, propping etc. and removal of form for :- Stairs, (excluding landings) except spiral staircases |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). |
| 7 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand ) |
| 8 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) |
| 9 | 15 mm cement plaster on the rough side of single or half brick wall of mix in cement mortar 1:4 ( 1 cement : 4 sand) |
| 10 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Fixing with adjustable lugs with split end tail to each jamb. |
| 11 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. |
| 12 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes. |
| 13 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood. 35 mm thick |
| 14 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing withbutt hinges of required size with necessary screws, excluding panelling which will be paid for separately,all complete as per direction of Engineer-in charge. Second class teak wood. 35 mm thick shutters. |
| 15 | Providing and fixing paneling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Areaof opening for panel inserts excluding portion in side grooves or rebates to be measured).Panelling for paneled or paneled and glazed shutters 25 mm to 40 mm thick : Second class teak wood |
| 16 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. wherever required, all complete In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender