Tender For (T2017-306-1484) Lwss Thanedhar In G.P. Thanedhar Tehsil Kumarsain Distt. Shimla H.P. (Sh:- Restoration Of Rain Damages For Repair Of Damaged Pump House, Laying Of Pump Foundation Block And Repair Of Pump Set No. 997354651/100/01 At Stage
Tender Value
12.25 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
0 days left
EMD
24500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for (T2017-306-1484) Lwss Thanedhar In G.P. Thanedhar Tehsil Kumarsain Distt. Shimla H.P. (Sh:- Restoration Of Rain Damages For Repair Of Damaged Pump House, Laying Of Pump Foundation Block And Repair Of Pump Set No. 997354651/100/01 At Stage 1St Stage At Jelthi).
BOQ
| Sl. No. | Item Description |
| 1 | Demolition below ground level upto 1.50 meters depth including stacking of serviceable materials and disposal of unserviceable material within 20 metres lead and including cutting the necessary reinforcement and separating from RCC/ R.B. Work. |
| 2 | Providing and laying cement concrete work 1:2:4(1cement:2sand:4 graded stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :- |
| 3 | Providing and laying cement concrete 1:5:10(1cement:5sand:10 graded stone agg. 40mm nominal size) with 15% plum concrete and curing complete excluding cost of form work in retaining wall/ breast wall, the size of plums shall usually be 150mm to 300mm as per HPPWD specifications within all leads and as per the direction of the Engineer-in-charge. |
| 4 | Providing Form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring , shuttering, strutting & propping etc. with wooden battens & ballies, height of propping & centring below supporting floor to ceiling not exceeding 4 mtrs.& removal of the same for insitu reinforced concrete & plain concrete work in. |
| 5 | Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses,plinth and string courses and the like. |
| 6 | Providing mild steel/Tor steel reinforcement for RCC work including bending, binding and placing in position complete. |
| 7 | Providing and fixing 10 mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalent 600*600*10 mm manufactured of approved shade and colour in flooring, treads of with steps and landing laid over 12 mm thick cement mortar 1:3 (1 Cement : 3 sand ) jointed with cment slurry mixed with pigment to match the shade of tiles as required complete. |
| 8 | Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub -base of concrete with 25 mm thick average thickness of cement mortar 1:4 (1 Cement : 4 sand ) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing and polishing complete (sub-base concrete floor to be paid separately) 40 mm thick block. |
| 9 | Providing wood work in frames of doors, windows, clerestory window and other frames wrought, framed and fixed in position. |
| 10 | Second class deodar wood: - |
| 11 | Providing and fixing panelled glazed or panelled and glazed shutters for doors, windows and clerestory windows including black enamelled iron butt hinges with necessary screws etc. complete. |
| 12 | 40 mm thick Second Class Kail wood: - |
| 13 | Brick work using common burnt clay bulding bricks in foundation and Plinth in cement mortar 1:4 (1 Cement : 4 sand ). |
| 14 | Second class bricks. |
| 15 | 15 mm cement plaster in single coat on the rought side of brick/ concrete / stone walls for interior plastering up to floor two level including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finised even and smooth. In Cement mortar 1:4 (1 Cement : 4 sand ). |
| 16 | Painting one coat (excluding priming coat) on previously painted wood and wood based surfaces with enamel paint brushing to give and even shade including cleaning the surface of all dirt, dust and other foreign matter, sand papering & stoping. |
| 17 | Ready mixed paint other than white. |
| 18 | Wall painting (Two coats) with acrylic emulsion paint approved brand and manufacture for interior grade on undecorated concrete/ stone / plastered wall surfaces to give an even shade including thoroghly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface. |
| 19 | Providing and fixing pump shaft EN-24 Stainless steel complete in all respect i/c all leads and lift |
| 20 | Providing and fixing stage ring CI complete in all respect i/c all leads and lift |
| 21 | Providing and fixing distance bush complete in all respect i/c all leads and lift. |
| 22 | Providing and fixing diffuser ring complete in all respect i/c all leads and lift. |
| 23 | Providing and fixing stand sleeve complete in all respect i/c all leads and lift. |
| 24 | Providing and fixng impeller GM complete in all respect i/c all leads and lift. |
| 25 | Providing and fixing diffuser CI complete in all respect i/c all leads and lift. |
| 26 | Providing and fixing bearing NU 207 K SKF ECKP / O complete in all respect i/c all leads and lift. |
| 27 | Providing and fixingbalancing disk complete in all respect i/c all leads and lift. |
| 28 | Providing and fixing fly chuck nut high carbon steel complete in all respect i/c all leads and lift. |
| 29 | Providing and fixing bract stud EN-9 complete in all respect i/c all leads and lift. |
| 30 | Providing and fixing impeller key & packing ring complete in all respect i/c all leads and lift. |
| 31 | Providing and fixing nut and bolts complete in all respect i/c all leads and lift. |
| 32 | Providng and fixing bearing house plate, water seal, gland plate, coupling key & galnd stud EN-9 steel. |
| 33 | Providing and fixing gland dori complete in all respect i/c all leads and lift. |
| 34 | Providing and fixing champion sheet & check nut complete in all respect i/c all leads and lift. |
| 35 | Providng and fixing cooling pipe with nipple long size complete in all respect i/c all leads and lift. |
| 36 | Providing and fixing adopter bush complete in all respect i/c all leads and lift. |
| 37 | Providing and fixng bearing house CI complete in all respect i/c all leads and lift. |
| 38 | Repair of impeller, diffuser & stage all by gas welding and turing compelte in all respect i/c all leads and lift |
| 39 | Carriage of Pump fitting and testing at sit fo work complete. |
| 40 | Supply of 100 HP fully automatic electrical control panel complete with Ampere meter, Volt meter, Hour meter Three phase indicators, Bus Bar Chamber etc. Main incumber MCCB main switch with complete wiring complete in all respect. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender