Tender For Repair & Raising Of Stone Wall At Some Places, Toilet And Roof Of Stand At Stadium In Iol Estate, Dehradun
Tender Value
34.81 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
13 days left
EMD
69650
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Raising Of Stone Wall At Some Places, Toilet And Roof Of Stand At Stadium In Iol Estate, Dehradun
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames /steel grill etc not exc. 1.5 sq. m each. |
| 2 | M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in 1:6 cement mortar. |
| 3 | M&L for Brickwork with old size sub-class 'B' bricks straight or curved on plan exc 6 m mean redius built in 1:6 cement mortar. |
| 4 | Cement concrete Type B2, 1:2:4 (40 mm graded aggregate) in foundations, filling and mass concrete in post holes etc. |
| 5 | Flat form work for rough finished surface to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, sides of posts, struts etc. also splays between floors and beams, etc. |
| 6 | Providing precaste reinforced cement concrete type B-1, 1 :2:4 (20 mm graded aggregate) in landings, cover slabs (for man holes etc.),chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in 1:4 cement mortar. |
| 7 | Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 8 | Providing, cement concrete B-1, 1:2:4 (20 mm graded aggregate )in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 9 | Rendering 15 mm thick cement plaster smooth and even in ratio 1:4 on fair faces of brick work or concrete surface. |
| 10 | M&L Flush Pointing to random rubble masonry, uncoursed or brought upto courses with cement mortat 1:4. |
| 11 | S&F Rolled sections as in framing for cladding, glazing, gates and the like fixed with angle cleats and connecting plates, etc.Fe-290 (Gde E 165)Make: TATA/Appolo/Jindal. |
| 12 | S&F of Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 13 | Demolition and dismantling Brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete article |
| 14 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings and disposed off as directed within 500 m. |
| 15 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.Make: TATA/JSW/Jindal/Appolo. |
| 16 | S&F Rolled sections of Fe 410-W (Gde E- 250) quality-A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters.Make: TATA/Jindal/Appolo. |
| 17 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire. |
| 18 | Chain link MS galvanisd fencing, any size or type directed. (Supply Only) |
| 19 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 20 | Rendering 12 mm thick cement plaster in ratio 1:4 on fair faces of brick work or concrete surface. |
| 21 | M&L Screed bed or bedding layer of mortar 15 mm thick of ratio 1:4 for laying floor finishes. |
| 22 | M&L Glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm/ 450x350x07mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match. |
| 23 | M&L Non - skid Ceramic color tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 24 | S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests complete (excluding flushing cistern and flush pipe) |
| 25 | S&F Vitreous China Urinal, Half stall type, white, including waste coupling of PTMT 32 mm suitable for urinal, waste pipe, Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap ) |
| 26 | S&F Vitreous China wash basin, white, flat back, size 550x400mm including brackets cutting for and pinning in ends of brackets or erecting stand and 40 mm Waste coupling of PTMT (minimum weight 60 grams, half or full threaded) including waste pipe. |
| 27 | S&F Fency type chromium plated Bib taps, 15 mm bore size cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 28 | S&F Fancy type Pillar taps of 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. |
| 29 | S&F PVC connections 15mm size with PTMT nuts of length 450 mm. |
| 30 | S&F in 15 mm bore size Stop valves, cast copper alloy, screwed down, high pressure,fancy type, chromium plated. |
| 31 | S&F of PVC valveless, syphonic action type, flushing cistern of capacity 10 liters, low level, white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern. |
| 32 | S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. |
| 33 | Demolition of unreinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 34 | PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 35 | Cutting holes N exc 150 cm superficial area into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required. |
| 36 | Tubes of size 15 mm bore, 'Medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors. |
| 37 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10cm girth in brick wall. |
| 38 | S&F Traps ‘P’ or ‘S’ of size 100 mm bore size. |
| 39 | S&F 110 mm PVC (SWR) bends any radius. |
| 40 | Cement concrete 100 mm thick, type B- 2, 1:2:4 (40mm graded aggregate) and Finishing cement concrete surface even and smooth without using of extra cement in sub floor/sub-base/floor/paving. |
| 41 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-290 (Gde E 165). Make: TATA/Jindal/Appolo. |
| 42 | Removing building materials etc. to a distance of 500 m or under, beyond the lead includedf in the rates, including loading, unloading and stacking at the destination. |
| 43 | Prepration of new steel surface of any description over 10 cm grith or width and applying two coat of synthetic enamel (ordinary tint) after priming with red oxide zink chrome. |
| 44 | Prepration of new plastered surface and applying double coat (Two coat) cement paint white or tinted on wall. |
| 45 | S&F GI concertina coil 600 mm dia (50 turn/coil) expendable 6 to 8 mtr Fixed on angle iron frame over brick wall/angle post all as sepcified as directed. |
| 46 | S&F flush valve, push type, 15 mm bore size, chromium plated suitable for half stall urinal. |
| 47 | Credit (-) old/unserviceable dismentled steel wondow frame/grills/window shutter/door frame etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender