Tender For Development Of Bamboo Park Construction Of Kids Area Gym Equipments, Provide Landscape, Sprinklers System, Light Facilities, Seating Facilities And Focal Point At Vishnu Nagar Ward 53 Zone 4 Tambaram
Tender Value
59 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
20 days left
EMD
59000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Bamboo Park Construction Of Kids Area Gym Equipments, Provide Landscape, Sprinklers System, Light Facilities, Seating Facilities And Focal Point At Vishnu Nagar Ward 53 Zone 4 Tambaram
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing Flexible polyethelene irrigation pipe 16 mm dia / 2.5 / 1.1 - 1.4 mm CL - II. \\" Netafim \\" including installation charges. |
| 2 | Supply, Fixing & commissioning of 5004 PLUS SAM PRS Series Rotor pop up sprinkler full/part circle having radius of 6.7m -12m @ 2.5 - 4.5 bar with discharge of 0.09 - 0.61 ltr./sec. the sprinklers having Arc Adjust thru Top Cover w/ Std. Screwdriver The sprinkler is gear driven rotary type with having 3/4\\"\\" bottom inlet. Oversized wiper seal, Rain Curtain technology, gentle close-in watering and Self-flushing arc adjustment port and also having tapered riser stem with Wiper Seal The sprinkler shall have Plus (PL) Flow shut off, 45 psi pressure regulator with flow optimizer technology, internal Seal - A - Matic device which prevents low head drainage (upto 3.1m) & hence puddling & erosion. The body of sprinkler is of non - corrodible, heavy duty, ABS plastic. O-ring Slip Clutch, Racheting Slip Clutch, Side Inlet Available 6\\"\\" and 12\\"\\",Turret- mounted ID Plugs, Flow Stop Available, Non-potable water indication available etc., complete including installation |
| 3 | Supply and fixing 16amps DP switch with metal clad(side handle) of 500 V with F & N on suitable teak wood Board of size 30cmx20cmx6 cm including necessary internal conection,earth connection etc.,complete |
| 4 | Earthing as per the ISI specification with an earth electrode of 2.0 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry |
| 5 | Supplying and run off 8 SWG copper wire on walls or below ground level with necessary 'U' nails, earth work excavation and refilling & including the cost of all materials etc., complete in all respects as directed by the departmental officers. |
| 6 | Supplying and fixing of 8 way three phase DB of 16amps/way with 16amps DP switch with metal glad of 500 volt(side handle) with Fuse and Neutral of suitable T.W. Board of size 40cm x30cmx6.3cm with earth connection etc., complete in all respects as directed by the departemental officers |
| 7 | Supplying and fixing of 5 A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch concealed in suitable MS box in flush with wall and covered with 3mm thick hylem sheet including cost of wall socket, switch and labour charges fo wall cutting, grouting, flushing and making good, painting with primary and finishing coat for MS box etc., complete as directed by the departmental officers. |
| 8 | Supplying and fixing of 5 A /15A 3 pin flush type wall socket with15A flush type switch concealed in suitable MS box in flush with wall and covered with 3mm thick hylem sheet including cost of wall socket, switch and labour charges fo wall cutting, grouting, flushing and making good, painting with primary and finishing coat for MS box etc., complete as directed by the departmental officers. |
| 9 | Supplying and fixing MCB isolator 32A TP with earth connection (Legrand (MDS/Hager (L & T make) |
| 10 | Wiring with 2x1.5sqmm PVC insulated single core unsheathed copper conductor cable of 1100V grade with ISI mark confirming to IS: 694/1990 in suitable PVC rigid pipe of 1.8mm thick with ISI mark concealed in wall and ceiling with PVC accessories in flush with wall including the cost of cable, pvc pipe and specials, ceiling rose, flush type 5ams SP mark switch, PVC junction box, 16gauge MS switch box 100mm x 100mm x 75mm covered by laminated hylem sheet 3mm thick, cement, labour and making good of concealed portion with suitable colour for concealed PVC LIGHT point. |
| 11 | Wiring with 2x1.5sqmm PVC insulated single core unsheathed copper conductor cable of 1100V grade with ISI mark confirming to IS: 694/1990 in suitable PVC rigid pipe of 1.8mm thick with ISI mark concealed in wall and ceiling with PVC accessories in flush with wall including the cost of cable, pvc pipe and specials, ceiling rose, flush type 5ams SP mark switch, PVC junction box, 16gauge MS switch box 300mm x 200mm x 75mm covered by laminated hylem sheet 3mm thick, cement, labour and making good of concealed portion with suitable colour for concealed PVC FAN Point. |
| 12 | Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour |
| 13 | Supplyand laying of 2 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good |
| 14 | Supply and fixing of 1200mm (48\\") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp |
| 15 | Supplying and fixing 12\\" (30cm dia) light duty Exhaust fan including cost of all materials,labour, lead, lift, etc complete |
| 16 | Supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting. |
| 17 | Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 -1/2 feet using angle iron of size1-1/2\\" x 1-1/2\\" x 1 /4\\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nut ssupports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1\\"x 1/4\\" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with 1 No 63 Amp 30 MA Four Pole RCD/ RCCB (LowerEnd) with suitable necessary connection with earth connection completet. |
| 18 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC Rigid pipe on wall and ceiling with PVC accessories with suitable Module GI switch box on wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open PVC conduit Plug point ( 8 points / Coil) Lower End |
| 19 | Preparation of soil mixture by breaking clods, sieving and mixing of fertile earth (including red soil, silt and sand etc., according to requirements) and farmyard mannure, heaping at the filling site and filling in polythene bags arranging bags in beds and pricking out the seedlings. (Excluding cost of earth and farmyard manure) Note: The proportion of fertile earth and F.Y.M.will be fixed by the respective C.Fs For Polythene containers size. |
| 20 | Supply & Stacking of red earth at site to thedepartmental guage for pre-measurementswhich is of light textured, crystalline, porous andfriable and not of generally acidic or neutral butnot of alkaline and should be fertile, includingseignior age charges, cost of transportation,loading, unloading, stacking and inclusive of alltaxes etc., complete |
| 21 | Supplying and filling in foundation, basement, etc with conveyed earth in layers of not more than 150mm thick layers well watered, rammed with surface vibrator and consolidated including conveyance charges etc. complete complying with standard specification and as directed by the departmental officers. |
| 22 | Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 23 | Providing following type of plants for park lawn area including finishing and labour charges cost and conveyance of all material at site etc., complete as per standard specification. |
| 24 | Ficus elastica tree |
| 25 | ROYAL PALM |
| 26 | Areca palm |
| 27 | PUNGAM |
| 28 | Shenbagam |
| 29 | FOX TAIL PALM |
| 30 | Jasminum grandiflourm flowering |
| 31 | Tecoma goudichoudi |
| 32 | BOUGAINVILLEA |
| 33 | Rangoon flowering |
| 34 | CANE BAMBOO TREE |
| 35 | BAMBOO GRASS VARIEGETA TREE |
| 36 | BLACK BAMBOO TREE |
| 37 | BUDDHA BELLY BAMBOO TREE |
| 38 | Tecoma capensis |
| 39 | GOLDEN BAMBOO TREE |
| 40 | Ficus panda |
| 41 | Ixora foliage |
| 42 | LANTANA PURPLE |
| 43 | Cassia alata |
| 44 | HIBISCUS MIX |
| 45 | RAIN LILLY |
| 46 | Tabernum dwarf |
| 47 | BAMBOO GRASS |
| 48 | Spathiphyllum |
| 49 | Livistona rotundifolia palm |
| 50 | Livistona rotundifolia palm |
| 51 | Tabernum variegated flowering |
| 52 | Tecoma goudichoudi |
| 53 | Supplying and fixing of children playing equipments at park including all cost of material and all labour charge complete as per standard specification. |
| 54 | Supplying and fixing of slide Senior to a length of 3.00 m with 80mm dia leaver and 40mm top bar with MS pipes.The seater is of moulded plastic. The ladder frme is made up of 25mm M.S. ppe., hanrail 20mm dia MS pipe and the centre support is 80mm dia MS pipes. The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers. |
| 55 | Supplying and fixing of Double Swing of height 2.40m height with 40mm dia MS pipes support as legs and top bar is 50mm dia. The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers. |
| 56 | Supply and Fixing of Merry Go Round Four seater 40mm dia GI pipessupport as legs and top bar is 50mm dia. The seat is 9mm thick including cost of Materials and cost of all labour charges for fixing, testing and commissioning the same etc. complete as per specification. |
| 57 | Supplying and fixing of Four Seater SEESAW to a height of 0.50m with 80mm dia leaver and 40mm top bar with MS pipes. The seatr is of moulded plastic with heavy duty bush bearing. The cost shall inclusive of all materials, labours and fixing etc complete as directed by the dpeartmetal officers |
| 58 | Supply and fixing of Air Rider Maximum User Weight 120 kilogram, Main Central Pipe 100mm dia G.I. Pipe Heavy, Handle Frame 32mm dia G.I. pipe, Seat Frame 32mm dia G.I. Pipe, 32mm dia G.I. Pipe, Connecting Links Pipe, Foot Rest Pipe 32mm dia G.I. Pipe, MS Foundation Plate Thickness 12 millimeter 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X4mm Seat and Back Rest 2.5mm thick, M.S. Perforated with uniformbending radius to avoidsharp edges Bearings Tapered Roller Bearing inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers. |
| 59 | Supply and fixing of Leg Press Cum Twister Single Maximum User Weight 110 kilogram for Main Frame 125mm dia G.I. Pipe, 40mm dia G.I. Pipe Leg Movement Frame Pipe, Handle Frame 25mm dia G.I. pipe, Tapered Roller Bearing Foot Rest Aluminum castingmaterial MS Foundation Plate Thickness 12 millimeter, Foundation Pipes 750mm deep GI Pipe, supported withM.S. Angle 25 X 25 X4mm inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers. |
| 60 | Supply and fixing of Ellipitical Cross trainer for Maximum User Weight 100 kilogram, Main Central Pipe 100mm dia G.I. Pipe, Handle Frame 32mm dia G.I. pipe, Seat Frame 32mm dia G.I. Pipe, Connecting Links 25mm dia G.I. Pipe, Foot Rest Pipe 32mm dia G.I. Pipe, MS Foundation Plate Thickness 10mm Foundation Pipes with anchoring 500mm deep GI Pipe, Seat and Back Rest 2mm Thick G.I. Seat with uniform bending radius to avoid sharpedges inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers. |
| 61 | Supply and fixing of Big Shoulder Wheel Maximum User Weight 100 kilogram, Main Central Pipe 80mm dia G.I. Pipe, Moving Frame Pipe 80mm dia G.I. Pipe, Foot Rest Frame/ Foot Rest Hinging Pipe 25mm dia G.I. Pipe, Connecting Links 25mm dia G.I. Pipe, MS Foundation Plate Thickness 10mm Foundation Pipes with anchoring 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X4mm, Seat and Back Rest 3mm thick, HDPE with uniform bending radius to avoid sharpedges inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers. |
| 62 | Supply and fixing of Leg lift Post Maximum User Weight 120 kilogram, Main Central Pipe 100mm dia G.I. Pipe Heavy, Handle Frame 32mm dia G.I. pipe, Seat Frame 32mm dia G.I. Pipe, 32mm dia G.I. Pipe, Connecting Links Pipe, Foot Rest Pipe 32mm dia G.I. Pipe, MS Foundation Plate Thickness 12 millimeter 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X4mm Seat and Back Rest 2.5mm thick, M.S. Perforated with uniformbending radius to avoidsharp edges Bearings Tapered Roller Bearing inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers. |
| 63 | Supply and fixing of Pull Up Bar Single Maximum User Weight 110 kilogram for Main Frame 125mm dia G.I. Pipe, 40mm dia G.I. Pipe Leg Movement Frame Pipe, Handle Frame 25mm dia G.I. pipe, Tapered Roller Bearing Foot Rest Aluminum castingmaterial MS Foundation Plate Thickness 12 millimeter, Foundation Pipes 750mm deep GI Pipe, supported withM.S. Angle 25 X 25 X4mm inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers. |
| 64 | Supply and fixing of Standing & Sitting Twister for Maximum User Weight 100 kilogram, Main Central Pipe 100mm dia G.I. Pipe, Handle Frame 32mm dia G.I. pipe, Seat Frame 32mm dia G.I. Pipe, Connecting Links 25mm dia G.I. Pipe, Foot Rest Pipe 32mm dia G.I. Pipe, MS Foundation Plate Thickness 10mm Foundation Pipes with anchoring 500mm deep GI Pipe, Seat and Back Rest 2mm Thick G.I. Seat with uniform bending radius to avoid sharpedges inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers. |
| 65 | Supply and fixing of Pull Up & Twister Maximum User Weight 100 kilogram, Main Central Pipe 80mm dia G.I. Pipe, Moving Frame Pipe 80mm dia G.I. Pipe, Foot Rest Frame/ Foot Rest Hinging Pipe 25mm dia G.I. Pipe, Connecting Links 25mm dia G.I. Pipe, MS Foundation Plate Thickness 10mm Foundation Pipes with anchoring 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X4mm, Seat and Back Rest 3mm thick, HDPE with uniform bending radius to avoid sharpedges inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers. |
| 66 | Supply and Delivery and Fixing of 50Lit Capacity Wall-mount cum Counter-top water purifier.2. Reverse Osmosis Technology.3. Anti-bacteria 3-in-1 Silver Doser, Taste Conditioner and Activated Carbon as post treatment of RO, to enhance the shelf life & taste of water.4. No of Stages: 6 (1+5). 5. Purification Capacity: Up to 25 lph† .6. Optional storage tank of capacity: 7 ltrs.7. Built-in SMPS to operate from 120~280 V AC for erratic voltage supply.8. Can Attach with Water Cooler or Dispenser.9. Dimensions: W 335 D 235 H455 Following Specification(1) Purification capacity-20*(+/- 5) Litres per hour *(2) Max Duty Cycle-150 liters per Day (3) Storage Tank Capacity- 7 Litres (optional at extra cost) (4) 6 stagesPurification -1) Sedement , 2)Activated Carbon 3)Sediment, , (4)RO Membrane,(5)Post Corbon, 6) TDS Minimiser,5) RO Membrane-2 Units (6) Minimum Inlet Water Pressure -0.3 kg/sq cm (7) Maximum Inlet water Pressure -2 kg/sq cm ( if input water pressure is more than 2kg/sq cm , install PRV before the Unit) (8) Input Voltage -160-300V AC ( 50Hz) (9) Operating Voltage -48V DC (10) Input water Temperature- Min 5 Celsius & Max 50 Celsius (11) Total Dissolved Solids (TDS)- Up to 2000 ppm(12) Total Hardness-500 ppm (max) (13) Rejection of TDS- Up to 95% (14) Recovery- Up to 25%(15) Dimensions (mm)- L 415 W 265 H 524 (16) Net Weight-12.5 kgs.(17) Power rating-48 W (* Purification output capacity tested on raw water with TDS level of 750 ppm at room temperature) |
| 67 | Supply and delivery of 240 Lit Capacity Mobile Garbage Bins shall conform to following specifications:-G• The material shall be heat and chemical resistant and shall be UV stabilized.The manufacturing process shall be Injection molding only as specified by EN 840-1 standard.The bins shall have suitable lid of HDPE Injection Molded at the top which shall be hinged on one side and open easily by gravity while unloading in refuse compactors.The bins shall have Nominal volume of 240 Ltrs.The bins shall have Two Solid rubber wheels of 200 mm Dia. (+-5 mm). Both these wheels shall be mounted on axle, which shall be corrosion resistant.The bins shall be provided with single piece pulling handle.The bins shall have deep and strong combs as per EN Standards. These combs shall ensure optimum accommodation on the lifting devices i.e. Refuse Compactors with Universal Bin Lifting mechanism.The useful load shall be min. 110 Kgs. As per EN standard.The color of the bins shall be Green/Blue/Grey/Yellow/Red and aesthetically pleasant in nature. |
| 68 | Supply and fixing of Ornamental Garden 3 person Granite chairs including cost of all materials, lead,lift etc |
| 69 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete |
| 70 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 71 | Supply and Fixing of Rolling Shuuter wherever required etc., complete complying with standard specification. (M-0405 SOR 25-26 Pg No: 85) |
| 72 | Supply & Fixing of Tambaram TCMC Logo - 4 ft logo including cost of material, labour, lead, lift etc., |
| 73 | Supply & Fixing of Tambaram TCMC Logo - 1.5 ft logo including cost of material, labour, lead, lift etc., |
| 74 | Supply and fixing of 8W Bollard Light |
| 75 | Supplying and fixing 4Way wall light 6W light including cost of material, labour, lead, lift etc., |
| 76 | Supplying and fixing Post Lantern light 50W outdoor light including cost of material, labour, lead, lift etc., |
| 77 | Supply and laying of LED Strip type light fitting with driver and all the fixing accessories (5Watts per Mtr). Similar to signify cat ref LS170S LED12 840 IP20 L5000 G2 |
| 78 | Supply and Fixing of Tambaram managarachi Board with logo for Park as directed by the departmental officers etc., complete. |
| 79 | Supply and Fixing of Toilet Board with logo for Park as directed by the departmental officers etc., complete. |
| 80 | Supply and Fixing of Toilet Entry board in english & tamil for Park as directed by the departmental officers etc., complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender