Tender For maintenance of Works Pertaining To Completed/Closed Scheme (Dwarka Zone).Sub Head : Repair Of Vacant Flats For Allotment At 352 Multistoried Two Bedroom Apartments Adjoining Pocket-3, Sector-19B, Dwarka, Ph-Ii.Estimated Cost : 28,34,323/-
Tender Value
28.34 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
5 days left
EMD
56686
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance of Works Pertaining To Completed/Closed Scheme (Dwarka Zone).Sub Head : Repair Of Vacant Flats For Allotment At 352 Multistoried Two Bedroom Apartments Adjoining Pocket-3, Sector-19B, Dwarka, Ph-Ii.Estimated Cost : 28,34,323/-
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 2 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 3 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.(i) Size of Tile 600x600 mm |
| 4 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade:(a) Old work (one or more coats) |
| 5 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 6 | French spirit polishing:(i) One or more coats on old work. |
| 7 | Providing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 8 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):(a) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 9 | Providing and fixing to existing door frames.(i)24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (+ 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (+ 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x24 mm and 2 mm (+ 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (x 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineerin- charge. (For W.C. and bathroom door shutter). |
| 10 | Providing heavy duty stainless steel Kitchen Sink Strainer Jali complete as per direction of Engineerin- charge. |
| 11 | Providing heavy duty stainless steel Wash Basin Strainer Jali/Coupling complete as per direction of Engineerin- charge. |
| 12 | Fixing of all sanitary & CP fittings for flats and check all drainage system & sewerage system of flat. |
| 13 | Providing SS grating of approved quality and colour. Square type 100X100 mm |
| 14 | Providing 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1.5 metre long with S.S. tringular plate for Eureopean type w.c. of quality and as approved by engineer in charge. |
| 15 | Providing manpower for Cleaning and sweeping of floor tile wall tile, windows, doors etc of vacent flat, as and when required basis disposal of collected waste to nearest dustbin by mechanical or manual means as per direction of Engineer-in-charge. |
| 16 | Providing C.P. brass bib cock of approved quality conforming to IS:8931:(a) 15 mm nominal bore |
| 17 | Providing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.(a) 15 mm nominal bore |
| 18 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931(a) 15 mm nominal bore |
| 19 | Providing and fixing Brass Concealed Stop Cock Disc Face 20 mm nominal bore of approved make and quality as per direction of Engineer-in-charge. |
| 20 | Providing Brass pillar cock of approved quality and colour.(a) 15 mm nominal bore |
| 21 | Providing C.P. brass shower rose with 15 or 20 mm inlet:(a) 150 mm diameter |
| 22 | Providing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.(a) Flexible pipe(i) 32 mm dia |
| 23 | Providing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.(a) Flexible pipe(i) 40 mm dia |
| 24 | Providing and fixing uplasticised PVC connection pipe with brass unions:(a) 30 cm length(i) 15 mm nominal bore |
| 25 | Providing and fixing toilet paper holder:(a) C.P. brass |
| 26 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 27 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:(a) One or more coats on old work |
| 28 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.(a) Granite stone slab of colour black, Cherry/Ruby red(i) Area of slab over 0.50 sqm |
| 29 | Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm c/c, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.| chanels 45 x15 x 0.90 mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450 mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64 mm dia x 230 mm long G.| wire at every junction, including fixing perimeter channels 0.50 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230 mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes, finishing with jointing compounds in three layers covering up to 150 mm on both sides of joints and two coats of primer suitable for boards, all as per manufactures specification and also including the costof making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with:(a) 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process.Note: 1. Physical handing over of flats shall be carried out by the contractor within 15 days from the date of intimation by the allottee to the concerned field staff. In case the contractor fails to complete the handing over within the stipulated time period as directed by the Engineer-in-Charge or the concerned field staff, a penalty of Rs. 2,000/- (Rupees Two Thousand only) per day per flat shall be imposed by the Department and shall be recovered from the contractor's bill. |
| 30 | Amount after applying 0.973 Multiplying Factor due to decrease in GST Rate i.e. on Rs. 29,15,597.00 |
| 31 | Add Cost Index (-) 0.09% i.e. on Rs.28,36,876.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender