Tender For Audio-Visual Modernization Work For Tiered Smart Classroom Solution On Bill Of Quantities (Boq) Basis At Nift Dharmashala, Kannur C Usnote: 1. Quoted Rate Should Be Inclusive Of All Applicable Taxes Including Gst (Nothing Extra Shall Be Pa
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Aug 2026
18 days left
EMD
57000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kannur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Audio-Visual Modernization Work For Tiered Smart Classroom Solution On Bill Of Quantities (Boq) Basis At Nift Dharmashala, Kannur C Usnote: 1. Quoted Rate Should Be Inclusive Of All Applicable Taxes Including Gst (Nothing Extra Shall Be Payable) 2. All Statutory Deduction Will Be Made As Per Prevailing Rates.
BOQ
| Sl. No. | Item Description |
| 1 | Electrical Works |
| 2 | Supply, installation testing and commissioning of 120W Peak/60W Program/ 30W RMS power handling 2 way wall mount speaker with 1\\" dome tweeter and 3\\" low frequency driver, Frequency response -90 Hz-18kHz sensitivity @ 1W/1m @ 100V - 95 dB horizontal/vertical dispersion -100 degree following technical specification:a) Crossover- Frequency: 2.5 kHz, type : Passive built in b) Dricvers- HF: 1\\", LF : 3\\"c) Impedance: 8Ωd) Ingress Protection rating: IP 40e) Sensitivity: (1W/1m): 85dbf) Sound pressure(maxW/1m)-@100V: 95DB, @8Ω: 100dBg) Speaker type: 2 wayh) RMS/AES power handling: 30Wj) Peak power handling: 120Wk) Program power handling: 60Wl) Dispersion -Horizontal: 100degree, Vertical : 100degreem) Line transformer Tappings: 250Ω-100V/Not used-70V/20W, 500Ω-100V/20W-70V/10W, 1000Ω-100V/10W-70V/5W, 2000Ω-100V/5W-70V/2.5W |
| 3 | Supply, installation testing and commissioning of 120W mixer amplifier with 6 x Microphone inputs, remote Mic, Chime & Mute contacts 5-zone output selector , low impedence and constant voltage output , priority inputs with phantom power , convection cooled , protection -DC short circuit , over heating over load , signal limitng with following technical specification:a) RMS/AES power handling: 120 Wb) Frequency: Response(+ 3dB): 20Hz-20kHzc) Signal/Noise:> 90dbd) THD +N (@1kHz): <0.5%e)Crosstalk(@ 1kHz): >70dBf) Technology Class: A/Bg) Power Supply: Transformerh) Power range: 230~240VAC/50~60Hzj) Common mode rejection ratio: 70 dBk) Input: Balanced Microphone: 1-4l) Type: 4 x Balanced Mic/Line(-6dB/-50dB)m) Connector: 2x XLR/jack combo & 2 x XLRn) Other: 4 x 15V DC phanbton & 2 x priorityo) Balanced Microphone 5: Type : 1 x balanced Mic/Line(-6 dB/-50dB)p) connector: 6.3mm Jackq) Unbaalanced sterio: Type 1 x Sterio Unbalanced line(+14dB/-30dB)r) Connector : RCAs)Other : remote mic (priority mic and Tele -paging(Priority line), Priority mute contact t)Outputs- Connector : 2 pin Euro Terminal Block (Pitch - 5.08mm), 10pin Euro Terminalu)Voltage/Impedence: 100V/4Ω |
| 4 | Supply, installation testing and commissioning of Cardiode condenser gooseneck microphone , frequency response 30-20000Hz integral 3-Pin XLRM type output connector. The item should be the following specifications:a) Fixed -charge back plate , permanently polarized condenser microphone element.b) Should have a cardiode polar pattern for focussed sound capturec) Should have a frequency response range of 30 Hz- 20000 Hzd) Should include a low frequency roll-off at 80 Hz with an 18dB/octave filter e) Should have an open circuit sensitivity of -39dB (11.2mV) re 1V at 1Paf) Should have a nominal impedence of 250 Ohms for optimal signal transmision .g) Should support a maximum input sound level of 139 dB SPL at 1kHz with 1% THD.h) Should provide a dynamic range of 115dB at 1kHz at maximum SPLj) Should have a singnal-to-noise ratio of 70 db at 1 Pak) Should operate with phantom power in the range of 11-52V DC, with a typical current draw of 2Mal) Should have an integral 3-pin XLRM type connector for balanced audio output |
| 5 | Supply, installation testing and commissioning of wireless Lapel microphone system with frequency response of 60Hz -16kHz with a 2 x 4 channel frequency plan for enhanced flexibility , microphone element of condenser cardiode operating range of 60m, typical |
| 6 | Supply, installation testing and commissioning of 86\\" UHD Intreractive board cum display with 3840 x 2160 resolution , flat form factor , Annotation over any content, Anti glare toughened display, 178 x178 viewing angle ,16 x 7 duty cycle, interfaces HDMI/RJ45/USB/WIFI/BLUETOOTH/RS232 and with following specification:, a) Display size: 86 inchb) Panel type: Backlit D-LED (IPS panel)c) Panel brightness(typical0: 350 cd/m2 or mored) Response time: 8ms or lessere) Aspect ratio: 16:9f) Resolution: 3840 x 2160 or moreg) Refresh rate: 60hz or moreh) Contrast ratio (typical) : 1200:1 or morej) Viewing angle: 178degree(H)/178degree(V)k) Speaker: Built in 2 x 15Wl) Android system version: Android 11.0; CPU: Quad Core; RAM: 4GB/8GB; Blue tooth version : 5.0; Wifi frequency: 2.4GHz/5GHz or higherm) Touch support system: Windows/Android/ Linux/MacOS/Chromen) touch technology: IR o) Touch tools: Finger, Stylus, Opaque Objectsp) Surface protection: 3mm toughened glassq) Connectivity: HDMI,VGA,USB,LAN,3.5mm Mic/Line, Wifi, OPS slotr) Operating temperature: 0 degreeC -40 degree C(32 degree F -104 degree F)s) Operating humidity: 10%-90% (non-considering)t) Intel core i5, RAM 8 GB, SSD 256, OS: Window 11 or higheru) OPS ports: USB Type-C , HDMI, VGA, USB, LAN,3.5 mm line |
| 7 | Supply, installation testing and commissioning of 2 KVA line interactive UPS alongwith with surge protection device 9U equipment rack, cable, connectors & accessories and with following specifications: a) Protection: Over load, Short circuit,b) Rating : 2000 VAc) Input Voltage: 230V ACd) Input voltage range: 145 V-290Ve) Input frequency: 45 Hz to 65 Hzf) Out put Voltage: 230 Vg) Freqency: Same as Input frequencyh) Output power capacity: ; 660 watts/1.1KVAj) Battery type: Maintenance free Sealed lead Acid (leak proof)k) Control panel: LED status display with On line , On battery, replace battery and Overload indicatorsl) Recharge time: 06 Hoursm) Efficiency at full load: 72%n) Surge emnergy rating: 255jules |
| 8 | Civil Works |
| 9 | Steel work welded in built up tubular framed work for 6 stepped classroom floor, providing 1200 mm wide tread and 150 mm rise for each level of stepped floor, using 50 × 50 × 2 mm MS hollow square tube sections, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including necessary welding, bracings, stiffeners, cleats, base plates, anchor fasteners and all complete as required. |
| 10 | Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine plywood conforming to IS:710 over supporting framework including necessary screws, adhesives, cutting, finishing and all complete. |
| 11 | Providing and fixing SPC rigid core flooring, 5 mm thick with wear layer, over prepared surface including underlayer, adhesive wherever required, cutting, finishing, riser cladding, skirting and all complete as per direction of Engineer in-charge. |
| 12 | Providing and fixing powder coated aluminium stair nosing/edge beading with anti-skid profile along exposed edges of stepped platform complete. |
| 13 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats. |
| 14 | Providing and fixing roller blinds made of durable fabric with smooth chain-operated mechanism, including all necessary brackets and fittings, complete in place. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender