Tender For special Repair To Certain Buildings, Drain And Provn Of Toilet Cum Bathroom At Trehgam Under The Aor Of Ge 874 Ews.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
92100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Certain Buildings, Drain And Provn Of Toilet Cum Bathroom At Trehgam Under The Aor Of Ge 874 Ews.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminium zinc coating GI based steel sheet 0.50mm thick, of any colour having tensile strength of 550 Mpa, profiled for ridge as in roof covering, fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling timber scantlings 40 sqcm and over in section in any position framed or unframed work etc, complete all as specified and directed. |
| 5 | M &L for second class soft wood as in scantling clean sawn fixed in position complete all as specified and directed. |
| 6 | M & L for second class soft wood as in scantling clean sawn fixed in position but except wood complete all as specified and directed. |
| 7 | All as per item no 6 above but as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, framed or unframed work complete all as specified and directed. |
| 8 | M & L for plain fillet, square, rectangular or triangular in section, clean sawn exc 3 Sqcm sand not exc 6 Sqcm secured with nails complete all as specified and directed. |
| 9 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 10 | S & F mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. with Fe 410 W (Gde E-250) quality 'A' complete all as specified and directed. |
| 11 | All as per item no 10 above but erection & fixing only. |
| 12 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 13 | S&F 12mm thick, 2nd Class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both side fixed to frame work with secret nailed as in wall panelling/false ceiling, including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface, complete all as specified and directed. |
| 14 | M&L for 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work in walls complete all as specified and directed. |
| 15 | M&L 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work in ceiling complete all as specified and directed. |
| 16 | S&F clean swan batten at 30 cm centre exc 5 and not exc 15 cm of 2nd class soft wood complete all as specified and directed. |
| 17 | Dismantling boarding, any description fixed in any position with nails complete all as specified and directed. |
| 18 | M&L for 20 mm thick 2nd class soft wood boarding, planed one side, with butt joints and fixed with nails in facia eaves boarding complete all as specified and directed |
| 19 | All as per item no 18 above but fixing only. |
| 20 | M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 21 | Machine cut Kota stone slab flooring 18-20mm thick over screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 22 | M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floor finished even and rough to received the topping layer complete all as specified and directed. |
| 23 | Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 24 | M&L for 50mm thick, PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in paving, plinth protection etc, surfaces finished even and smooth without using extra cement and dividing into panels not exc 1.20 Mtr complete all as specified and directed. |
| 25 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 26 | S&F for glazed ceramic tiles coloured of size 350x250x7mm/450x350x7mm thick fixed in vertical surfaces, set and jointed in neat cement slurry and pointed in white and colour cement to match including 10mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 27 | M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 28 | Demolition of brick/stone work built in cement mortar including all quoins, arches, pillar including coping etc., complete all as specified and directed. |
| 29 | M & L for walling of random rubble uncoursed well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed. |
| 30 | M&L brick work with old size bricks, straight or curved on plan exc 6m radius, in cement mortar 1:6 complete all as specified and directed. |
| 31 | M&L brickwork with old size bricks, straight or curved on plan to any radius in half brick thick walls, in cement mortar 1:6 complete all as specified and directed. |
| 32 | Taking down cement plaster on brick walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 33 | M& L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick / concrete/stone, surfaces and finished even and smooth without using extra cement mixed with WPC @ 3% by Wt. of cement (External surfaces) complete all as specified and directed. Note:- WPC shall be measured and paid separately. |
| 34 | Supply only approved integral water proofing compound complete all as specified and directed. |
| 35 | M & L for rendering 15mm thick on fair faces of brick, stone or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement (Internal surfaces) complete all as specified and directed. |
| 36 | M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed. |
| 37 | M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of cement primer complete all as specified and directed. |
| 38 | M&L for two coats of synthetic enamel paint over one coat of pink primer on newly prepared wooden surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and directed. |
| 39 | M&L for one coat of synthetic enamel paint old wooden surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and directed. |
| 40 | M&L for preparation of old steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 41 | M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 42 | Taking down chowkhats or frame exe. 1.5sqm and n.exc. 4 sqm each with shutter (w/o taking out shutter) complete all as specified and directed. |
| 43 | Taking down chowkhats or frame not exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and directed. |
| 44 | Taking down shutters n, exc 1 Sqm each complete all as specified and directed. |
| 45 | Taking down shutters exc 1 Sqm and n. exc 2 Sqm each complete all as specified and directed. |
| 46 | S&F for 2nd class soft wood, plain, solid, straight chowkats or frames, wrought framed rebated on the solid, rounded or chamfered, put together with flue pinned at joints complete all as specified and directed. |
| 47 | S&F for 35mm thick, 2nd class soft wood, plain framed panelled shutter (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats 35mm thick second class soft wood (Kail) complete all as specified and directed. |
| 48 | S&F 35mm thick, 2nd class soft wood, Glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. complete all as specified and directed. |
| 49 | S&F 30mm thick, 2nd class soft wood, Glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc supplied and fixed to chowkhat, shutter for window and ventilator as specified in SSR Part-I , Section-8, clause 8.24 (b) complete all as specified and directed. |
| 50 | M & L for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, over Powder Coating to (minimum thickness of powder coating 50 micron) complete all as specified and directed. |
| 51 | M & L for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. over powder coating of any colour (Thickness or powder coating not less than 50 micron complete all as specified and directed. |
| 52 | M & L sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 in each pane, 5.5mm thick complete all as specified and directed. |
| 53 | S&F in repair door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed Aluminium (extruded section) complete all as specified and directed |
| 54 | S&F Harrison rails, stainless steel, with fixing brackets, stops, rollers etc., complete all as specified and directed. |
| 55 | S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete all as specified and directed. |
| 56 | S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; partly glazed i.e. upper panel will be glass pane fitted externally in the clear space & lower panel will be plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification described in SSR 2004 Part II Item No 881. |
| 57 | S & F Mild Steel butt hinges 100mm long medium weight complete all as specified and directed. |
| 58 | S & F 200mm long aluminium alloy, anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 59 | S&F for 75mm long stainless steel butt hinges medium weight cold rolled complete all as specified and directed. |
| 60 | S&F for 150mm length aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 61 | S & F 300 mm long aluminium alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminium alloy complete all as specified and directed. |
| 62 | S & F aluminium handles, cast type, anodized 150mm long complete all as specified and directed. |
| 63 | S&F Aluminium handle, cast type, anodised 100 mm long complete all as specified and directed. |
| 64 | Hacking out old broken glass (any thickness size quality or description) from wooden frame glazed with putty or wooden beads complete all as specified and directed. |
| 65 | M & L for sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 in each pane, 3mm thick complete all as specified and directed. |
| 66 | S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and directed. |
| 67 | S&F galvanised mild steel wire cloth .56mm nominal dia of wire and average width of aperture 1.18mm including fixed complete all as specified and directed. |
| 68 | M & L cements concrete 1:3:6 type C1 (using 20mm stone aggregate as in plinth protection), 75mm thick complete all as specified and directed. |
| 69 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed. |
| 70 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed. |
| 71 | S&F steel tubing galvanized iron medium grade with all fitting laid in concealed, trenches, floors or fixed to walls or ceiling, in any length, bore of pipe 15mm complete all as specified and directed. |
| 72 | S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed. |
| 73 | M&L for lagging to pipes 15mmdia used in internal water supply or plumping all round with,25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144 kg/cum conforming to IS-9842 complete all as specified and directed. |
| 74 | M&L for lagging to pipes 20mm dia used in internal water supply or plumping all round with,25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144 kg/cum conforming to IS-9842 complete all as specified and directed. |
| 75 | S&F rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples, complete all as specified in SSR Part I including dismantling of existing tank complete all as specified and directed. |
| 76 | S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed in repair with 20 mm dia complete all as specified and directed. |
| 77 | S&F 600x450 mm size bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 78 | M & L for Vitreous China wash basin, vertically mounted fancy bowl flat back size 550 x 400 m including waste pipe and coupling 32mm for basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including MS brackets & waste pipe complete all as specified and directed. |
| 79 | M&L for Vitreous China squatting Pan \\"Orrisa Pattern\\" size 580 x 440mm white with integral foot rests including flush pipe of PVC 32mm dia for low level cistern fixed in repair complete all as specified and directed. |
| 80 | S&F in repair Vitreous China wash down water closet pan with 'P' trap (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc. complete all as specified and directed. |
| 81 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 82 | S&F in repair PVC valve-less symphonic action type flushing cistern, low level white with inlet ball valve float and handle incl brackets (10 Ltr) capacity complete all as specified and directed. |
| 83 | S&F Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed. |
| 84 | S&F in repair PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified and directed. |
| 85 | S&F in repair Stop valve 15mm bore, cast copper alloy screwed down, high pressure, with crutch jor butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 86 | M & L in repair for CP Pillar taps, with capstan head chromium plated 15 mm bore fancy type complete all as specified and directed. |
| 87 | S & F Waste coupling of PTMT (half or full thread). (Minimum weight 32 mm-45 gms / 40mm-60gms) for 32mm bore dia of discharge pipe fixed to WHB or sink complete all as specified and directed. |
| 88 | S&F in repair Bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked) complete all as specified and directed. |
| 89 | S&F in repair PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 90 | S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified and directed. |
| 91 | S&F PVC gully trap square or round mouthed type (P), size of trap 125x 110mm and jointing to drains with solvent cement in repairs complete all as specified and directed. |
| 92 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls complete all as specified and directed. |
| 93 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls complete all as specified and directed. |
| 94 | M&L for PVC (SWR) WC connector with lip ring 110mm complete all as specified and directed. |
| 95 | M&L for PVC (SWR) vent cowl for 75 mm dia complete all as specified and directed. |
| 96 | S&F Pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 97 | S&F continuous (piano) hinges mild steel, right finish or electrogalvanized width of flaps 40mm (when open) complete all as specified and directed. |
| 98 | Demolition of Reinforced in suspended slabs, beams, lintels etc. in cement mortar or cement concrete (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 99 | M&L for 14 to 16 mm thick green marble slab for kitchen platform/shelf and vertical faces duly machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry including cutting and polishing of type including 15mm thick screed bed layer of cement mortar 1:6 complete all as specified and directed. |
| 100 | M&L for RCC 1:2:4, type B1 (Nominal mix) using 20 mm graded crushed aggregate as in slab supported on walls, beams and column in floor, roof, landings, balconies, canopies, deck slab and in shelves etc. complete all as specified and directed. |
| 101 | M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed. |
| 102 | All as per item no 101 above but 6mm to 8mm dia TMT bar. |
| 103 | Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed. |
| 104 | M&L for PCC (1:3:6), nominal mix, type C-1 using 20mm graded aggregate as in surface channel and drain complete all as specified and directed. |
| 105 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. |
| 106 | M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and directed. |
| 107 | M&L for 10mm thick coloured paver tiles of size 300mmx300mm over and including a layer of 15mm thick screed bed in CM 1:4 joints filled with coloured cement to match complete all as specified and directed |
| 108 | M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick and including a layer of 15mm thick screed bed in CM 1:4, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed |
| 109 | M & L for providing, cement concrete type B-0 (1:2:4) (using 12.5mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 110 | M & L for Acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors complete all as specified and directed. |
| 111 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified. |
| 112 | S & F for factory made fully glazed PVC window/ventilator shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; complete all as specified and directed. Note:- Glass shall be measured and paid separately. |
| 113 | M & L for Precoated sheet type door spring, heavy type, 200 mm long including roller and roller plate, complete all as specified and directed. |
| 114 | S&F Sheet glass shelf assembly consisting of 5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 115 | M & L for surface dressing n. exc.30cm deep and averaging 15cm deep and getting out in soft soil/loose soil complete all as specified and directed. |
| 116 | Excavation in trenches in any type of soil n.exc 1.50m wide and n. exc 1.50m in depth and getting out complete all as specified and directed. |
| 117 | Removal of excavated (soil) to a distance not exceeding 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed. |
| 118 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed. |
| 119 | M&L for cement Concrete in foundation filling and mass concrete of mix 1:4:8 type D2 (40mm graded aggregate) complete all as specified and directed. |
| 120 | M&L for rendering 15mm thick on brick or concrete surface in CM 1:4, finished even and smooth with out using extra cement complete all as specified and directed. |
| 121 | M&L for reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 122 | M&L for Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases of columns etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 123 | M&L for Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in beams chhaja, cantilevers, bressummers, lintels over 1.5 mtr span complete all as specified and directed. |
| 124 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams; and similar works; vertical or to batter for rough finished flat surfaces complete all as specified and directed. |
| 125 | Formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 126 | Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed. |
| 127 | M&L Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm and n.exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B1 using 20 mm graded crushed stone aggregate, complete all as specified and directed. |
| 128 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete with glazing bars, dove tailed or welded including one shop coat of zinc chromite’s primer complete all as specified and directed. |
| 129 | S&F frosted glass 4.00 mm thick, and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed. |
| 130 | S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site complete all as specified and directed. |
| 131 | S&F Mild steel pressed handle, oval type stove enamelled, black size of handle 150mm complete all as specified and directed. |
| 132 | S&F Mild steel tower bolt stove enamelled black 150mm long black with bright bolt and fixed complete all as specified and directed. |
| 133 | S&F Mild steel butt hinge medium weight cold rolled 100mm size complete all as specified and directed. |
| 134 | M&L for Spreading and levelling in layers n exc. 25 cm thick and watering and well ramming under floor complete all as specified and directed. |
| 135 | M&L Hardcore of gauge n. exc. 63mm broken stone boulders, deposited spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface in broken bricks boulders complete all as specified and directed. . |
| 136 | M&L for 6mm thick E board (classic) of size 610x610mm as in false ceiling fixed with aluminium snap grid frame work of same size as aluminium Tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick aluminium Tee as cross runner and aluminium angle of size 25x25x1.25mm at the perimeter including Gl 6mm adjustable suspender of required length of any description including dismantling old boarding, any description, fixed in any position with nails complete all as specified and as directed. Note:- The design and specification of the ceiling board to be approved by GE. |
| 137 | S&F brass CP mixer for mixing hot and cold wash hand basin water screwed down for iron pipe, 15 mm bore complete all as specified and directed. |
| 138 | S&F stop valve cast copper alloy, chromium plated fancy type, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe complete all as specified and directed. |
| 139 | S&F stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe with long shank chromium plated concealed type complete all as specified and directed. |
| 140 | S&F chromium plated shower rose with or without swivel joints 125mm size including fixing to steel pipe complete all as specified and directed. |
| 141 | S&F towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed. |
| 142 | S&F PVC SWR Bends in any radius 110 mm bore with access door complete all as specified and directed. |
| 143 | S&F PVC SWR Bends in any radius 75 mm bore with access door complete all as specified and directed. . |
| 144 | S&F for 110mm dia bore PVC SWR branch piece single (Double Y) equal or unequal complete all as specified and directed. |
| 145 | S&F for 75mm dia bore PVC SWR branch piece single (Double Y) equal or unequal complete all as specified and directed. |
| 146 | Excavating over areas, n exc 1.5m deep for foundation and getting out in soft / Loose soil complete all as specified and directed. |
| 147 | M & L for stone walling of Random rubble stone masonry, brought upto course well bonded, bedded and solidly hearted built in CM (1:4) including providing weep holes, complete all as specified and directed. Note : - Deduction of volume occupied by PCC bond stone shall be made and payment of stone masonry shall be made based on net measurement only. |
| 148 | Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed face beds and joints of random rubble walling uncoursed or brought upto course surface n exc.40mm in granite or trap stone complete all as specified and directed. |
| 149 | M & L for precast cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) set in cement mortar 1:4 as in bond stone walling, complete all as specified and directed. |
| 150 | M&L for stone/boulder filling, laid dry, hand packed tightly around weep hole complete all as specified and directed. |
| 151 | M & L for raised pointing to random rubble stone masonry, uncoursed or brought upto courses in cement mortar 1:3 complete all as specified and directed. |
| 152 | Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming and finishing to required height etc., n exc. 1.5 m high above base complete all as specified and directed. |
| 153 | Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming and finishing to required height etc. exc 1.50m but n exc. 3.00 m high above base complete all as specified and directed. |
| 154 | Excavation over area excavation 1.50m and not exceeding 3m complete all as specified and directed. |
| 155 | M & L for PCC 1:3:6, nominal mix type C-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 156 | M & L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 157 | M&L SGSW line 150mm dia SGSW pipe laid in trenches and jointed complete all as specified and directed. |
| 158 | M&L 150 mm thick reinforced concrete pipes, class NP2 laid and jointed complete with collars complete all as specified and directed. |
| 159 | M&L for concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded aggregate) for 150mm bore pipe complete all as specified and directed. |
| 160 | M&L for RCC M-25 design mix using 20mm graded aggregates in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 161 | M & L PCC 1:2:4 type D-2 in foundation, filling and mass concrete (using 40 mm graded crushed stone aggregate) complete all as specified and directed. |
| 162 | M & L rendering 15 mm thick plastering in cement mortar 1:4 on brick / stone masonry other than fair faces of brick wk. finished even and smooth without using extra cement, complete all as specified and directed. |
| 163 | M&L Precast RCC 1:2:4 type B1 cover slab using 20mm graded stone aggregate with plain fair faces incl. chamfers, weathering and setting in CM 1:6 including necessary form work complete all as specified and directed. |
| 164 | All as per ser Item No 29 above but except stone complete all as specified and as directed |
| 165 | M & L flush pointing to random rubble stone masonry in cm 1:4, uncoursed or brought upto courses complete all as specified and directed. |
| 166 | Demolition and breaking up 300mm dia and over, drain pipes (PVC, Salt glazed ware, AC or Reinforced concrete) set in cement mortar any size and in any position including all fitting complete all as specified and directed. |
| 167 | S&F Reinforced concrete pipes of 300mm dia , class NP3, laid and jointed complete including packing under and haunching against the sides of pipe after they are laid and tasted with collars complete all as specified and directed. |
| 168 | M&L concrete bed to drain pipes in cement concrete type C2 for class NP 3 of dia 300mm including packing under and completely surrounding pipes with concrete after they are laid and tested in complete all as specified and directed. |
| 169 | M & L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi stranded flexible cable (green colour) as earth lead in and including cable 1100 volts grade including casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified and directed. |
| 170 | All as per item No 169 herein before but wiring with 1.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board. |
| 171 | All as per item No 169 herein before but wiring with 1.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board. |
| 172 | All as per item No 169 herein before but wiring with 4 sqmm copper wire (FR-LS-H) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board. |
| 173 | S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. |
| 174 | S& F of Socket outlet 2 in 1, 3 pin, 6A complete all as specified and directed. |
| 175 | S & F switch socket combination 2 in 1,5A, flush type complete all as specified and directed. |
| 176 | S & F switch socket combination 5 pin 16A, flush type complete all as specified and directed. |
| 177 | Supply and fix ceiling rose with earth terminal 2/3 connection, PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 178 | S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection/ PVC/ polycarbonate, isolated body. complete all as specified and directed. |
| 179 | M & L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed. |
| 180 | Supply and fix LED Bulb 9 Watt complete all as specified and directed. |
| 181 | S&F 09W/10W Bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 182 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. |
| 183 | Supply and fixing of on load change over Switch 63 Amp, 2 Pole 3 Phase, Capacity (as required as per site requirement) complete all as specified and directed. |
| 184 | S & F in repair distribution boards VTPN, 4 way, double door 415 volts 50 Hz, AC including fixing on suitable rectangular block complete all as specified and directed. |
| 185 | S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's, made out of sheet steel enclosure, recessed type, factory made powder coated 12 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. |
| 186 | S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's, made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. |
| 187 | S&F MCB's single pole 240 volts 6 to 32 Amps 10 KA 'C' curve series, complete all as specified and directed. |
| 188 | S & F of MCB SPN, 240 volt, 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed. |
| 189 | M & L for wiring for circuit/submain wiring along with earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x4 sq. mm + 1x1.5 sq. mm earth wire complete all as specified and directed. |
| 190 | S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, 3.5 core 35 sqmm cross sectional area in trenches or walls complete all as specified and as directed. |
| 191 | Supply and Fixing 1100 Volts grade heavy duty cable PVC insulated multistranded aluminium conductor served with PVC tape and overall PVC sheathed in services connections suspended by insulating hanger not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat or circular of size 16 Sqmm 2 core including service bracket complete all as specified and directed. |
| 192 | M & L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on complete all as specified and directed. |
| 193 | All as per item No 169 herein before but wiring with 2.5 sqmm copper wire (FRLS) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board complete all as specified and directed. |
| 194 | Supply and fixing in replacement LED warm lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 195 | Dismantling & Refixing the exhaust fan in same or deferent location including making hole on the wall and making connection complete all as specified and directed. |
| 196 | M & L sub main wiring with 2 runs of 4 sqmm PVC insulated unsheathed 1100 volt grade multistranded copper conductor FRLS including PVC casing & caping of suitable size and provision of one run 4 sqmm PVC insulated unsheathed single core copper conductor as earth continuity , connected to earth dolly inclusive of all accessories complete all as specified and directed. Note :- 3 Runs of 4 Sqmm wire and one run of PVC casing & caping shall be measured as one unit . |
| 197 | Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathed of PVC tape overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, including service bracket for incoming through one twin core cable of size 16 Sqmm complete all as specified and directed. |
| 198 | Fixing only exhaust fan including dismantling and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and directed. |
| 199 | Supply and fix in replacement, water heater storage type, electric capacity 25 ltr along with all accessories BEE 5 star rated complete all as specified and directed. |
| 200 | Supply and fixing in replacement LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender