Tender For Repair/Maint Of Area Drainage, Retaining Wall, Fencing And Gate At Ranikhet Under Ge Ranikhet
Tender Value
20 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
13 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Almora → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Area Drainage, Retaining Wall, Fencing And Gate At Ranikhet Under Ge Ranikhet
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 2 | M&L for brick work in CM (1:4) straight or curved on plan exc 6.0m mean radius and using old size sub class 'B' bricks all as specified. |
| 3 | M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping bed plates, water trough and the like including weathering, slightly rounded or chamfered angles and throating including use of necessary form work and finishing the surfaces even and smooth without using extra cement all as specified and as directed. |
| 4 | M&L for plain cement concrete 1:3:6, type C-2 using 40 mm graded stone aggregate as in Cement concrete in surface channels and drains complete all as specified and as directed. |
| 5 | Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key; scrubbing down with water complete all as specified & directed. |
| 6 | M&L for rendering 15mm thick in cement mortar 1:4 to fair faces of brick or concrete surfaces finished fair and even without using extra cement complete all as specified and directed. |
| 7 | M&L for applying two coats of cement base paint over a coat of cement primer on newly plastered surfaces of wall including preparation complete all as specified and directed. |
| 8 | Demolition of reinforced cement concrete of any description and in any position not otherwisespecifically provided (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 9 | M&L for providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed. |
| 10 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 11 | Demolition of stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 12 | M&L for stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and directed. |
| 13 | M&L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 complete all as specified. |
| 14 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil |
| 15 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick all as specified. |
| 16 | Removal of excavated soil exc 1.50 km but n exc 5 Km and depositing where directed 50m and depositing where directed. |
| 17 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 18 | M&L PCC 1:4:8 type D2 (40 mm graded aggregate) as in fdns, filling and mass concrete complete all as specified and directed. |
| 19 | Plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregates as in cills, lintels upto 1.50 metre clear span, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form work complete, all as specified. |
| 20 | M&L Hand packing of broken stone or boulders (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level. |
| 21 | S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. |
| 22 | Dismantling wrought iron or mild steel work of any description not otherwise provided |
| 23 | S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (GdeE- 250) qualityAcomplete all as directed and specified. |
| 24 | M&L for preparing new Steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamalle paint over a coat of red oxide zink chrome primer. complete all as specified and as directed. |
| 25 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar. |
| 26 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms, dado/wall and like over 10mm thick cement mortar 1:3 including pointing in white cement mortar 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed |
| 27 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 28 | Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete, brick work, masonry etc. in any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 29 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 30 | Excavating in post holes (or similar holes)in soft and loose soil each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in hard/dense soil and removing the excavated soil complete all as specified and directed. |
| 31 | M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in post holes complete all as specified and directed. |
| 32 | S&F for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 33 | Supply only 3mm dia chain link fencing of oblong wire mesh size 100x100 mm with weight n.exc 4kg/sqm complete all as specified and directed. |
| 34 | Fixing only Chain link fencing including line wires any mesh, size and type of any type of standards, rails, straining bolts, etc including provision of binding wires complete all as specified and directed. |
| 35 | MS round bars 10mm dia & over cut to length bent to shape required incl cranking bending spirally for hoping for colm & backing ends and binding with & include MS wire (aheaded ) not less than 0.90 mm ida or securing with clips quality confirming to Fe-410W (grade E-250) Quality A or Fe 290 (Gde-E-165) complete all as specified and directed. |
| 36 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end screwed the other to be fitted with washers and one hexagonal or square nut length of bolt exc.5 cm but n exc 10 cm long & dia of neck 11 to 15 mm complete all as specified and directed. |
| 37 | S&F in repair Galvanised 2 stand steel barbed wire 2.24 dia barbed with 2mm dia bars at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire, staple or steel pins all as directed. |
| 38 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 39 | M&L for preparation of new steel surfaces of any description, n exc 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender