Tender For Provn Of Deficient Office For Age B/R (P) Salaria At Salaria Offrs Enclave, Dwarka Sector-21 Under Ge(West) Delhi Cantt-10
Tender Value
30.57 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
20 days left
EMD
61200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Deficient Office For Age B/R (P) Salaria At Salaria Offrs Enclave, Dwarka Sector-21 Under Ge(West) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : HQ CWE NO 2 DELHI CANTT-10 NAME OF WORK: PROVN OF DEFICIENT OFFICE FOR AGE B/R (P) SALARIA AT SALARIA OFFRS ENCLAVE, DWARKA SECTOR-21 UNDER GE(WEST) DELHI CANTT-10 Contract No : CWE/WEST/TOKEN-15/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Surface excavationin soft/losse soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed. |
| 4 | Excavation in trenches n.exc 0.45 m wide and n.exc 0.60 m depth for laying of LT cables etc. and getting out in soft/loose soil, complete all as specified and directed. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed. |
| 6 | M & L for removing excavated material exc. 250m but not exceeding 500m and depositing, complete all as specified and directed. |
| 7 | M & L for removing excavated material to distence not exc. 50m where directed at a level n.exc 1.5 m from the starting point, complete all as specified and directed. |
| 8 | Supply and spreading clean dry sand in trenches for cushioning/cable protection complete all as specified and directed. |
| 9 | Supply and fix GI Pipe 32 mm dia light grade, for laying in road crossing/ fixing of vertically complete all as specified and directed. |
| 10 | Supply and laying sub clas 'B' Bricks of old size laid along alignment of cable as protection to cable in trenches complete all as specified and directed. |
| 11 | M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation and mass concrete complete all as specified and directed. |
| 12 | M & L cement concrete M-30 design mix (using 20mm graded crushed stone aggregate) for foundations, including rafts, footings, foundations beams, plinth beams, bases for columns etc ,complete all as specified and directed. |
| 13 | M & L cement concrete M-30 design mix (using 20mm graded crushed stone aggregate) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and this like, complete all as specified and directed. |
| 14 | M & L cement concrete M-30 design mix (using 20mm graded crushed stone aggregate) for columns, pillars, piers, post and strut complete all as specified and directed. |
| 15 | M & L cement concrete M-30 design mix (using 20mm graded crushed stone aggregate) for beams, cantilivers, beressummers, lintels over 1.5m span complete all as specified and directed. . |
| 16 | M & L for formwork to sides of concrete , foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work for flat rough finished surface complete all as specified and directed. |
| 17 | M & L for formwork to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) for flat rough finished surface complete all as specified and directed. |
| 18 | M & L for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantiliver shelves etc. for flat rough finished surface complete all as specified and directed. . |
| 19 | M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions etc.for flat rough finished surface complete all as specified and directed. |
| 20 | M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete raillings , opening in concrete walls, floors and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, hozontal or sloping and similar work exc 5cm but n exc 10cm etc.for flat rough finished surface complete all as specified and directed. |
| 21 | M&L for mild steel TMT bars 10mm dia and over cut to length,bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 22 | All as per Ser item no 1 here in before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed. |
| 23 | M & L for brick work with sub class 'B' bricks (old brick), straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed. |
| 24 | M&L for 40 mm thick DPC on horizontal or vertical surfces in PCC 1:2:4 type B0 using 12.5mm graded crushed stone agg incl all necessary form work and mixing of WPC (WPC shall be measured and shall paid seperately as supply only), complete all as specified and directed. |
| 25 | M & L for hardcore of gauge n exc.63 mm (using broken stone or boulders) deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 26 | M & L for 100 mm thick cement concrete type D-2, 1:4:8 (40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed. |
| 27 | M & L for Non-skid ceramic coloured tiles of 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match with the shade of tiles and including cement screeding 15mm thick in cement mortar 1:4 complete all as specified and directed. |
| 28 | M & L for Glazed ceramic coloured tiles 600x 300 x 9 to 10mm thick as in dado, set and jointed in neat cement slurry and pointed in colour cement to match including rendering 10mm thick in cement mortar 1:3 rough finished as a backing coat complete all as specified and directed. |
| 29 | M&L for 16-18 mm thick granite table rubbed and polished in Step, Jambs, Pillar, Window Cill, Cooking Platform (In single piece) with additional 75mm width of same granite patti stick with araldite or equivalent adhesive full moulding of edges to match the colour of granite, including 15 mm thick screed bed in CM 1:4, complete all as specified and directed. Note:- Additional 75mm width patti shall be measured separately. |
| 30 | M & L for 750 mm wide, 75 mm thick cement concrete 1:3:6 type C-2 (Nominal Mix) with 40mm crushed stone aggregate finished even and fair, laid to slope of 1 in 12. It shall be laid in alternate bays, each bay not exceeding 3 m length with joint to be filled with bituminous mastic filling comprising a mixture of 1 part of heated hot blown bitumen 85/25 penetration and two parts of heated sand, complete all as specified and directed. |
| 31 | M&L for rendering 10mm thick ready mix plaster on fair faces on other than fair faces of brick work or concrete surfaces of walls finished fair and even without using extra cemet ,complete all as specified and directed. |
| 32 | M&L for rendering 15mm thick ready mix plaster on fair faces of brick work or concrete surfaces of walls finished fair and smooth without using extra cement ,complete all as specified and directed. |
| 33 | M&L for 5mm thick ready mix plaster on fair faces finished fair and even surface without using extra cement on ceiling, chajja in etc complete all as specified and directed. |
| 34 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 35 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note:- Stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 36 | S & F 150 mm long SS barrel tower bolts of extruded section, complete all as specified and directed. |
| 37 | S & F 150 mm long extruded SS handles fabricated type and anodised, complete all as specified and directed. |
| 38 | S&F powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator S&F Anodised alu frame (powder coating) for doors, windows, ventilators with one or more rebates incl joining cleat for fixing etc. complete all as specified and directed. |
| 39 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type with/ without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as tower bolt (75mm long), peg stays 150mm long (1 No), hinges type B-21, 100mm long (2 Nos) suitable handle (1 No) complete all as specified and directed. |
| 40 | S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mmcomplete all as specified and directed. |
| 41 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed. |
| 42 | S&F110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors, complete all as specified and directed. |
| 43 | S&F110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, along with clips, etc. complete all as specified and directed. |
| 44 | S & F for 110mm bore PVC (SWR) pipe, bends any radius, with access door, complete all as specified and directed. |
| 45 | S&F for 110mm bore PVC (SWR) pipes, junction single, (single T) equal or unequal any radius, complete all as specified and directed. |
| 46 | S&F for 110mm bore PVC (SWR) pipes, branch piece, single (single Y) equal or unequal any radius, complete all as specified and directed. |
| 47 | S & F for 110mm bore PVC (SWR) pipe, vent cowl, complete all as specified and directed. |
| 48 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors,complete all as specified and directed. |
| 49 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, along with clips, etc. complete all as specified and directed. |
| 50 | S & F for 75mm bore PVC (SWR) pipe, vent cowl, complete all as specified and directed. |
| 51 | S & F for 75mm bore PVC (SWR) pipe, bends any radius, with access door, complete all as specified and directed. |
| 52 | M&L 75 mm dia of outlet PVC (SWR) floor trap, plain with CP grating incl jointing with solvent cement, complete all as specified and directed. |
| 53 | M&L 20mm outer dia CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass threated fittings (like elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. ) CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and directed. |
| 54 | All as per Ser item No 52 here in before but 25mm outer dia, complete all as specified and directed. |
| 55 | S & F vitreous china white glazed european type WC with white ISI marked plastic seat cover closed pattern with flat bottom, and cover and mild steel chromium plated hinging device and flush pipe of high density PVC 32 mm dia, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc., including fixing of high or low level flushing cistern and connection to pipes, complete all as specified and directed. |
| 56 | Supply only, 10litre capacity PVC flushing tank,, syphonic action type, flushing cistern, low level, white, with inlet, ball valve,pvc flush pipe, float and handle incl brackets, complete all as specified and directed. . |
| 57 | S&F PVC connection 15mm dia of standard pattern 600 mm long, with two Nos brass check nuts (adopts) and washers etc complete all as specified and directed. |
| 58 | M&L for 600x450mm beveled edge mirror of selected quality glass 5.5 mm thick mounted on and including 6mm thick AC building board or commercial plywood and fixed 1st class Hard wood moulding frame and two Nos. hanging clips complete all as specified and directed. |
| 59 | S&F brass chromium plated tubuler towel rail 20mm dia D type ISI marked 60cm long between flanges including a pair of CP brass brackets, complete all as specified and directed. |
| 60 | S&F 2-in-1 Bib cock, fancy type, chromium plated brass, fixed for 15mm bore dia of pipe, complete all as specified and directed. |
| 61 | S & F brass CP angle/ stop valve for 15 mm bore dia of pipe including connecting to PVC/CP connection complete all as specified and directed. |
| 62 | S&F 1000 Ltr capacity rotational moulded polyethylene water storage tank triple layer (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I including tank nipple and fittings, etc., complete all as specified and directed. |
| 63 | S&F 20 mm ball valve PTMT high pressure with polythene float and flynut complete screwed for iron/ cpvc pipes, complete all as specified and directed. |
| 64 | S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, complete all as specified and directed. |
| 65 | M & L for applying white wash three coats on newly plastered surfaces of ceiling including preparation of new surfaces complete all as specified and directed. |
| 66 | M & L for two coats of distemper oil emulsion over and including a coat of primer with 1 mm thick wall care putty including preparation of new plastered surface of wall complete all as specified and directed. |
| 67 | M & L for applying two coats of cement base paint over and including a coat of cement base primer on newly plastered surfaces of walls including preparation of new surfaces complete all as specified and directed. |
| 68 | M&L for prepration of newly plastered surfaces of wall and applying two coats of weather proofing exterior acrylic emulsion paint of DULUX Weather shield Max or APEX ULTIMA from Asian paint over and including one coat of primer complete all as specified and directed. |
| 69 | S & F butt hinges medium weight stainless steel 100mm size complete all as specified and directed. |
| 70 | M & L for water proof treatment to RCC roof slab incorporating CONPLAST WL (water proofing compound) in the proportion as directed by the manufacturer and apply on damp pcc surface first coat of brush bond RFX and again apply second coat of brush RFX after drying of first coat (average 1 mm thickness) and on completion 50 mm thick pcc 1:2:4 mix (4 parts of 10 mm normal coarse aggregates, 2 parts of fine aggregate and one part of cement) cement concrete screed and finsih the top surface. Complete roof shall be tested by ponding of water for 24 hrs. Note :- Brush bond RFX liquid powder and CONPLAST WL shall be of FOSROC or Sika or Pidilite. |
| 71 | S& F steel window including pressed steel frame made of 1.25 mm thick MS sheet of size 125x60mm,double revated with side hung shutters both glazed and gauged incl box type hinges,steel handles and peg stay,tower bolts complete with glaze/gauge bars devotailed or welded incl one shop coat of red oxide primer (Wire gauge and glass panes shall be measured seperately) incl M & L for providing PCC type B-1 ,1:2:4(using 20mm graded stone aggregate) to fill the frame and making good complete all as specified and directed. |
| 72 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; ladders; framed balusters; walk ways; railings; framework of water tanks, roof truss and similar work conforming to Fe-290 Gde-E-165,complete all as specified and directed. |
| 73 | M&L for vitrified ceramic tiles light shade 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including provn of 15mm thick screed bed or bedding layer in CM 1:4 etc, complete all as specified and directed. |
| 74 | M&L for Vitrified Ceramic tiles light shade 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as in skirting/ dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including provn of 10 mm thick rendering as a backing coat rough finished in CM 1:4 etc complete all as specified and directed. |
| 75 | M & L for pre treating the bottom and sides of excavation prior to construction with anti termite treatment at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 76 | M & L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surfacecomplete all as specified and directed. |
| 77 | S&F Fancy type brass chromium plated bib tap for iron/cpvc pipe of 15mm bore fancy type with flynut capstan head, screwed down high pressure complete all as specified and directed. |
| 78 | S&F 15 mm dia pillar taps, fancy type brass with capstan head chromium plated screwed down high pressure with or without lettered “hot/cold” with long screwed shank and flynut screwed, complete all as specified and directed. |
| 79 | S&F Health faucet, CP brass with 1.50m long flexible pipe complete all as specified and directed. |
| 80 | S&F Vitreous China Urinal, Half stall type, white (including necessary assoceries ) Vitreous China urinals, bowl type (back or corner wall type), with urinal spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cementcomplete all as specified and directed. |
| 81 | S&F Steel rolling shutters 1.25 mm thick, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with bevel gear box and crank handle alongwith safety lever locks mild steel with 4 levers, complete all as specified and directed. |
| 82 | M&L Machine cut kota stone slab 20-25 mm thick as in flooring, laid over and incl 20 mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed with cement and pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed. |
| 83 | M&L Machine cut kota stone slab 20-25 mm thick as in vertical surfaces such as riser of steps, skirting, dado and pillar etc., laid over and incl 10 mm thick backing coat in CM 1:3 set and jointed in neat cement slurry and pinted with cement and pigment to match the shade of the slab incl rubbing and polishing etc., complete all as specified and directed. |
| 84 | S&F Bottle trap of 32 mm dia CP having minimum water seal of 25mm (Minimum weight 32mm-260gms/ 40mm-270 gms), complete all as specified and directed. |
| 85 | S&F Low density polyethylene pipes (LDPE) 32mm bore pipe of pressure rating 6 kg/ cm2 laid in trenches complete all as specified and directed. |
| 86 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of three/ four track windows & ventilators and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, including the cost of rollers, locking arrangement for each shutter, etc., complete all as specified and directed. |
| 87 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 88 | M & L for cement concrete type B0 1:2:4 (using 12.5 mm graded aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 89 | M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in soft/ loose soil complete all as specified and directed. |
| 90 | M&L for Providing, cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) for post holes complete all as specified and directed. |
| 91 | S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 92 | S & F wind ties for roof including securing bolts; etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting screwing or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 93 | M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws (all inclusive) complete all as specified and directed. |
| 94 | M&L for Painting two coats on steel and iron surfaces of any description with synthetic enamel paint over and including one coat of red oxide on new or previously untreated surfaces exc. 10 cm width or grith including preparation of surface complete all as specified and directed. |
| 95 | M&L for Reinforced concrete pipe class NP2, 150mm dia laid in trenches & jointed in cement mortar (1:2) with collars complete all as specified and directed. |
| 96 | M&L for cement concrete 1:4:8 type D-2 using 40mm graded crushed stone agg incl packing under and haunching against sides of 150mm dia (Internal dia) pipe after they are laid and tested, (Thickness of concrete bed 100mm)complete all as specified and directed. |
| 97 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed. |
| 98 | S&F factory made SFRC drain/Mainhole cover medium duty M-25 grde 75mm thick size not exc .75sqm each complete all as specified and directed. |
| 99 | M&L for cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in surface channels/ drains complete all as specified and directed. |
| 100 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc., complete all as specified and directed. |
| 101 | Supply and fix PPR Gate valves (brass insert) of 25 mm bore dia complete all as specified and directed. |
| 102 | Supplying,laying and testing complete 3 layer PP-R (Polypropylene Random Copolymer) concealed pipes conforming to IS:15801 SDR 7.4 (PN-16) UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random including all fittings are (PN-25) such as elbow,tees,bends,shaddles laid in trenches or fixed on wall etc incl taking and connecting branch connections from existing PVC or GI mains pipe line complete all as specified and directed for following outer dia of pipes 50 mm dia complete all as specified and directed. |
| 103 | Supply and fix Valves , Sluice, flanged of class 1.6 PN , 50 mm dia (2''), complete all as specified and directed. |
| 104 | Supplying,laying and testing complete 3 layer PP-R (Polypropylene Random Copolymer) concealed pipes conforming to IS:15801 SDR 7.4 (PN-16) UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random including all fittings are (PN-25) such as elbow,tees,bends,shaddles laid in trenches or fixed on wall etc incl taking and connecting branch connections from existing PVC or GI mains pipe line complete all as specified and directed for following outer dia of pipes 25 mm dia complete all as specified and as directed. |
| 105 | Provn of water connection by means of cutting existing pipe line 100 mm bore in position for insertion of Tee equal 100x100x50 mm dia including earth work including tee, lead joints etc. complete all as specified and directed. |
| 106 | Supply and lay cable in replacement XLPE insulated screened PVC bedded, galvanized steel strip and wire armoured , electric power cables (heany duty) 1100 volts grade with stranded alumimium conductor of size 25 Sqmm 3.5 core, complete all as specified and directed. |
| 107 | Supply and lay cable in replacement XLPE insulated screened PVC bedded, galvanized steel strip and wire armoured , electric power cables (heany duty) 1100 volts grade with stranded alumimium conductor of size 10 Sqmm 2 core, complete all as specified and directed. |
| 108 | Supply & fix in repair factory made epoxy powder coated Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoingcomplete all as specified and directed. and conforming to IS : 8623. |
| 109 | M&L in replacement MCCB 100 Amps, 25 KA , 4P, complete all as specified and directed. |
| 110 | M&L point wiring complete with 1.5 Sqm single core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with multi stranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI) marked concealed in wall/fixed to roof, ceiling etc and incl provn of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box made out of 1.60 mm thick sheet steel duly painted concealed in walls, with modular sheet ISI marked top cover with brass/chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc, all as specified and as directed. |
| 111 | One light /Ceiling fan/exhaust fan point controlled by one switch. |
| 112 | One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board. |
| 113 | One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board |
| 114 | One light point controlled by two, two way switch ( switch to be measured and paid separtely) |
| 115 | All as per item No.109 herein before but with 4 Sqmm cable for one 3 pin 15 Amp switch socket outlet and using 4 sqmm PVC single core copper conductor cable multistranded as earth wire complete all as specified and directed. Note for Item 109 & 114: (i) In case the wiring is encountered with any beam/column, then the wiring will run on PVC casing&caping/Existing conduit to avoid any damage to the RCC portion. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling fan point wiring, in this specified portion wires shall run through the surface new conduit shall be provided as mentioned in note (i) above.(iii) Proper colour code will be used for wiring as per the electrical rule and as directed by EIC. |
| 116 | M&L for Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls all as specified and as directed. Note:- (i) Two runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as unit length. (ii) The damaged surfaces to be made good with plastering will be carried out by contractor and cost of the same deem to be included in the quoted rates. Nothing extra in this account will be admissible. |
| 117 | M&L for Sub main wiring complete with two runs of 10 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 10 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls all as specified and as directed. Note:- (i) Two runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as unit length.(ii) The damaged surfaces to be made good with plastering will be carried out by contractor and cost of the same deem to be included in the quoted rates. Nothing extra in this account will be admissible. |
| 118 | M&L switch Modular type 6 Amp SP one way ISI marked complete all as specified and directed. d |
| 119 | M&L switch Modular type type 16 Amp SP one way, ISI marked complete all as specified and directed. |
| 120 | M&LModular type socket outlet 5 pin 6 Amp flush type, ISI marked complete all as specified and directed. |
| 121 | M&L Modular type socket outlet 2 in 1,5 pin 6/16 Amps, ISI marked complete all as specified and directed. |
| 122 | M&L switch Modular type 6 Amp two way ISI marked complete all as specified and directed. |
| 123 | M&L ceiling rose 3 terminals PVC polycorbonate,isolated body, complete all as specified and directed. |
| 124 | S & F Modular electronic fan regulator step type,2 module ,360 degree rotation complete all as specified and directed. |
| 125 | Supply and fix MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as specified and directed. |
| 126 | Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as specified and directed. (Note:- (i) MCB shall be measured and paid separately ,(ii) make of DB & MCBs shall be same. |
| 127 | M&L MCB SPN 40 Amp \\"B\\" curve, 10 kA complete all as specified and directed. |
| 128 | M&L MCB SP 6 to 32 Amp \\"B\\" curve ,10 kA.complete all as specified and directed. |
| 129 | S&F surface mounting LED luminarie Aluminium extruded tube for not less than 20W LED light(4 ft) housing. Fixture should have minimum efficacy at system level >=120 lumens/Watt, life of fixture not less than 50K Hrs,L70 B30,Ripple<5%,UGR<19,minimum Surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 THD<10% @ 240v Ac. An operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed. |
| 130 | S&F surface mounting LED luminarie Aluminium extruded tube for not less than 10W LED light(2ft) housing. Fixture should have minimum efficacy at system level >=120 lumens/Watt, life of fixture not less than 50K Hrs,L70 B30,Ripple<5%,UGR<19,minimum Surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 THD<10% @ 240v Ac. An operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed. |
| 131 | Supply and fixing ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, remote operated , BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length,complete all as specified and directed. |
| 132 | M&L for modular AC Box 3 Module with 20A SP mini MCB,Plastic enclosure & unbreakable Heavy Duty ISI mark cover and Plug Top complete set of flush box ,Mini MCB and Plug Top dully concealed in wall and connected with geyser/AC point wiring complete all as specified and directed. |
| 133 | M&L for fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge. |
| 134 | S & F pressure die cast aluminium housing LED street light luminaires with IP65/66 deg. of protection suitable for 45 watt LED fitting duly fixed on 40 mm dia GI mast including 50X 6 mm thick MS flat with suitable size of fastner including making connection flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed. Note :- The Contractor quoated the rates incl all accessories like suitable GI pipe mast, 50x6 mm thick MS flat, fashner, nut & bolts, suitable length of flexiable wire. |
| 135 | Material and labour for earthing complete with Galvanized Steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level and filled with 15cm thick alternate layers of charcoal and salt, connected & including GI wire earth lead 4.0mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron protected by 15mm dia GI Pipe (light grade). Earth plate shall be surrounded by alternate layers of charcoal or coke and common salt in 15cm thick in layers & 15cm of widht all aurround of earth plate including 20mm dia GI light grade pipe for watering and including funnel, wire mesh, necessary earth work in any type of soil, Pre-cast RCC cover duly re inforced with 8mm dia TMT Bar @150 mm c/c both ways, one lifting handle made of 8 mm dia TMT bar embedded in cover slab, Earth Pit of PCC (1:3:6) type C2 (using 20mm graded crushed store aggrgate) complete all as specified and as shown in electrical plate No-3 of SSR Part-I including testing on completion, complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender