Tender For special Repair To Operation Work Shelter No 5047/08 And 5047/09 (Other Rank Living) Of 301 Army Avn Sqn (Spl Ops) At Mil Stn Haldwani Under Ge Ranikhet
Tender Value
44.08 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
19 days left
EMD
88200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Almora → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Operation Work Shelter No 5047/08 And 5047/09 (Other Rank Living) Of 301 Army Avn Sqn (Spl Ops) At Mil Stn Haldwani Under Ge Ranikhet
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed. |
| 2 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins, post where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed. |
| 3 | S&F MS work as in wind ties for roof including securing bolts complete all as specified and as directed. |
| 4 | Dismantling boarding, any description, fixed in any position with screw complete all as specified and directed. |
| 5 | Dismantling floor, hearth, wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises. |
| 6 | M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete. |
| 7 | M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with backcoat of screed bed or bedding layer 10mm thick 1:4 and pointed in white or coloured cement to match complete all as specified.. |
| 8 | Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete. |
| 9 | Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete. |
| 10 | S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified. |
| 11 | S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, 2 x Tower Bolt 150 mm, anodised aluminium snap beading, screws etc. complete all as specified |
| 12 | Supply & fixing powder coated aluminium windows and ventilator shutters,sliding or fixed type without sash bars , aluminium section weighting 0.55 kg/m including necessary joining cleats , glazing clips ,roller, rubber packing, anodised aluminium snap beading , screws,anodised aluminium fitting such as peg stays hinges,handle,locking device, louvers, rollers etc. complete all as specified. (Note:- Glass pane and mesh will be measured and paid separately ) |
| 13 | Supply and fixing powder coated designer grill of 5.5 mm dia and aperture of 75 mm fixed with and including aluminium powder coated flat section of size 50 x 1.5 mm complete all as specified and directed. |
| 14 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and as directed |
| 15 | S&F Sheet glass 4.8mm thick tinted glass and glazing in squares completeall as specified and directed. |
| 16 | Supply & fixing aluminium sheet powder coated of thickness not less than 5mm thick to be in sealed as panel in aluminium door including fixing complete all as specified and directed. |
| 17 | S&F 150 mm overall length floor stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed |
| 18 | S&F Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 250 mm long complete. |
| 19 | S&F for door closer aluminium extruded section hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed |
| 20 | S & F 200 mm long aluminium anodized barrel tower bolts of extruded section lcomplete all as specified and as directed. |
| 21 | S & F aluminium handle, cast type anodized 150mm size. |
| 22 | S&F Butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed. |
| 23 | M&L for two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer on new steel surfaces over 10cm width or girth including preparation of surface complete. |
| 24 | M&L for one coat of synthetic enamel paint to old decorated steel surfaces of girth exc 10cm including preparation of surfaces complete |
| 25 | Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings. |
| 26 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering /cladding to wall, fixed with self tapping screws as specified complete all as specified |
| 27 | S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering /cladding to wall, fixed with self tapping screws as specified complete all as specified |
| 28 | Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level). |
| 29 | M&L 75mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection incl finishing even and smooth w/o using extra cement. |
| 30 | M&L for 25mm thick PCC 1:2:4 type B-1 (20mm graded stone aggregate) as in level course with finshining in cement concrete surface even and rough to receive screed bed complete all as specified and directed. |
| 31 | M&L for providing PCC 1:2:4 type B-0 as in roof kerbs or mud stops rouded or chamfered on edges (using 12.5mm graded stone aggregate) complete all as specifed and directed. |
| 32 | M&L Labour for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed. |
| 33 | Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc complete. all as specified and directed. |
| 34 | M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) etc. incl finishing even and fair complete all as specified NOTE -WPC shall be measured and paid separetely. |
| 35 | Supply only WPC complete all as specified and directed. |
| 36 | M&L Preparing newly plastered surfaces and applying two coat of cement base paint over a coat of primer complete all as specified and as directed |
| 37 | Dismantling wall and ceiling boards, any thickness incl cover fillets complete all as specified and directed. |
| 38 | S&F powder coated aluminium snap grid frame work for false ceiling size of grid 605 mm x 605 mm with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified complete all as specified and directed. |
| 39 | Supply & fixing 4mm thick non asbestos E-board cememt building board for insulation and accoustic purpose, 600 x 600 mm size fixed with staples on snap grid as in ceiling complete all as specified and directed. |
| 40 | S&F thermocol sheet 30mm thick as in false ceiling to reduce to heat in Ist floor roof ceiling complete all as specified and as directed. |
| 41 | S&F Decorative Stainless steel tubular curtain rail of 25mm dia incl six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window (make and materail approved by Engineer-in-charge) complete all as specified and directed. |
| 42 | S&F in repair 50mm thick prefabricated puf panel factory made, the panels comprise of PUF bonded between two sheet of precoated GI sheets of 0.5 mm thick complete all as specified and as directed. |
| 43 | Supply & fixing in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed including necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as specified and directed. |
| 44 | Excavation in trenches not exc. 1.50m wide and not exc. 1.50m in depth for foundation etc or for manholes cesspits, shafts etc not exc 10 sqm on plan and getting out in hard / dense soil complete all as specified and directed. |
| 45 | Removing excavated soil to a distance n.exc 50m where directed at a level n.exc 1.50m above the starting point complete all as specifed and directed. |
| 46 | Return filling , in including spreading , levelling , watering and levellng and well ramming in layers not exc 25 cm compleate all as specified and directed. |
| 47 | M &L For PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete. Please Enable Macros to View BoQ information |
| 48 | M &L For PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender