Tender For Provn Of View Cutter For Old Md Accn And Tcp-1 And Provn Of Landscaping And Garden Lighting Near Offrs Institute At Mil Stn Abohar
Tender Value
9.78 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
16 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Fazilka → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of View Cutter For Old Md Accn And Tcp-1 And Provn Of Landscaping And Garden Lighting Near Offrs Institute At Mil Stn Abohar
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in post holes each n. exc. 0.50Cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surface.complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L for PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in foundation of cols, bdy pillars, posts, struts, etc. filling and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 3 | S&F Structural steel work in tubular trusses including special shaped washer, Mild steel screw bolts (machine made) size as required at site etc. complete using ERW or induction butt welded tubes grade St-240 complete all as specified and directed by Engineer-in-Charge. |
| 4 | S&F Plates (Plain or chequered) channels,squarecut or notched (ordinary and counter sunk) forming holes, w/o any attachment conforming to FE-290 (Gde-E-165 ) complete all as specified and directed Engineer-in-Charge |
| 5 | S&F Fibre glass reinforced translucent corrugated/plain sheeting 2 mm thk with two corrugations side lap (if corrugated) fixed with coach screw and washer in roof, wall/cladding etc complete all as specified and directed by Engineer-in-Charge. |
| 6 | M&L for preparation of steel surfaces of any description upto and over 10cm in width or girth not otherwise described and applying 2 coats of Synthetic enamel paint over a coat of red oxide primer, all as specified and directed by Engr-in-Charge. |
| 7 | Surface dressing n exc 15 cm deep in hard/dence soil complete all as directed by Engr-in-Charge. |
| 8 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dence soil. |
| 9 | Returning filling in hard/dense soil incl spreading, levelling, watering, and well ramming in layers complete all as specified and directed. |
| 10 | Removing excavated material of soils n. Exc 50 mtr and depositing where directed at a level n. Exc 1.50 m above the starting point complete all as specified and directed. |
| 11 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in fdn filling and mass concrete complete. |
| 12 | M&L for Brick work using old size burnt clay bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 13 | M & L for rendering 15 mm thick on brick work or concrete surface in CM 1:4 finishing even and smooth without using extra cement, all as specified and directed by Engr- in- charge. |
| 14 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engineer-in-charge |
| 15 | M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken bricks |
| 16 | M&L for PCC 1:3:6 Type C-2 (40 mm graded aggregate ) 100 mm thick complete all as specified and directed by Engineer-in-Charge. |
| 17 | M&L Rendering 10mm thick in CM 1:4 on on on fair faces of brick work or concrete surfaces for skirting/dado etc complete all as spd and directed |
| 18 | M&L for Glazed ceramic tiles in vertical surface 450x 300x 7 mm/ 600X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as spd and directed |
| 19 | M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as spd and directed |
| 20 | M&L for Outdoor Non skid ceramic coloured /printed tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spd and directed |
| 21 | M&L 15 -18mm thick granite stone slab of any type (cut, table rubbed and polished)in steps, jambs, pillars, window cills, cooking platforms, wall and like , bedded & jointed with grey cement slurry & pointing with coloured cement using marble dust with admixture of pigment to match with marble shade; laid over complete all as spd and directed |
| 22 | S&F Mount LED Bollard light 10/12 watt IP 65 with excellent light out put through its PMMA window ensuring maximum illumination aspect in surrounding length of light not less than 600mm, design and light colour of light as decided by accepting officer complete including juction box for light connection from cable all as specified and directed.Make Havells, Orient, Jaquar, Philips. |
| 23 | Supply and fix high power outdoor LED light fitting 10 W 46.2, model JRF-3-18R, Input voltage 48 V DC -AC 100- 277 V ,Colour -RGB, Water proof including GI pipe/channel and clamps,nuts,bolts etc with all acessories complete all as specified and as directed. Make; Syska or equivalent in Philips/CG/Havells/Bajaj |
| 24 | Supply and fix outdoor LED focus light fitting 10/15 W 46.2, model JRF-3-18R, Input voltage 48 V DC -AC 100- 277 V , Water proof including GI pipe/channel and clamps,nuts,bolts etc with all acessories complete all as specified and as directed. Make; Syska or equivalent in Philips/CG/Havells/Bajaj. |
| 25 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core complete all as specified and directed. |
| 26 | M&L for Excavation in trenches any type of soil , n exc 1.5m wide and n exc 1.5m in depth , for foundation , etc or for shaft, well, cesspits , manholes , pier hole etc n exc 1.5 m in depth and getting out for laying of cable complete all as specified and directed. |
| 27 | M&L for Returning , filling in including, spreading , leveling , watering and well reaming in layers not exc. 25 cm within the 1 mtr stretch complete all as specified and directed. |
| 28 | M&L for Removal of excavated material to a distance not exc 50 mtr and depositing where directed at level not exc 1.5 mtr above the starting point complete all as specified and directed.by Engr-in-charge |
| 29 | M & L for MS work for febrication of cover, Junction boxes etc. as required MS angle iron of required size , MS sheet cover, cross arms, bracing, supports, clamps structual steel section including nuts,bolts, washers, welding, bending, cold or hot drilling holes for bolts in any shape or size for fixing of MCCBs/ MCBs also and including of one coat of primer and one finishing coat of paint complete all as specified and directed by Engr-in-charge. |
| 30 | M&L for Cement concrete in foundations, filling and mass concrete Type B2 1:2:4 20 mm graded aggregate complete all as specified and directed. |
| 31 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40-63 Amps capacity in the MCB DB box complete with connection testing and commissioning complete all as specificed and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender