Defence Statutory Bodies & Commissions/Committees Closing in 12 days TDR #56612694

Tender For Repair/ Maintenance To Hard Standing/ Platform, Plinth Protection, Apron, Rain Water Pipe, Sunshades, Chajjas And Other Structural Elements In Residential And Tech Area At Diat(Du) & Milit Girinagar, Pune-25

Issued by Statutory Bodies & Commissions/Committees · Pune, Maharashtra
Tender Value
30 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
12 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repair/ Maintenance To Hard Standing/ Platform, Plinth Protection, Apron, Rain Water Pipe, Sunshades, Chajjas And Other Structural Elements In Residential And Tech Area At Diat(Du) & Milit Girinagar, Pune-25

BOQ

Name of Work:- REPAIR/ MAINT TO HARD STANDING/ PLATFORM, PLINTH PROTECTION, APRON, RAIN WATER PIPE, SUNSHADES, CHAJJAS AND OTHER STRUCTURAL ELEMENTS IN RESIDENTIAL AND TECH AREA AT DIAT(DU) & MILIT GIRINAGAR, PUNE-25
Sl. No. Item Description
1M & L for 40 mm type B-0, 1:2:4 (12.5mm graded aggregate) as in floor, path, paving finished even & rough, complete all as specified and directed.
2Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water to remove dust etc complete all as specified and directed.
3M&L for rendering 15 mm thick plaster in CM (1:6) on wall surface finished even and smooth without using extra cement complete all as specified and directed.
4M&L for rendering 15 mm thick plaster in CM (1:4) on wall surface finished even and smooth without using extra cement complete all as specified and directed.
5Racking out joints/pointing to old random rubble or polygonal rubble uncoursed or brought up to courses buit in cement or cement lime mortar complete all as specified and directed.
6M&L for keyed pointing to old random or polygonal rubble uncoursed or brought upto courses in cement mortar 1:4. complete all as specified and directed.
7Dismantling floor, hearth or wall tiling/ chequered tile/interlocking tile including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed .
8M & L hardcore of broken stone or boulders of gauge n.exc.63mm,deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified and directed.
9M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base etc complete all as specified and directed.
10S&F for glossy finished chequered cement concrete tiles 30cmx30cmx30mm/20 x 20 x25 mm (as approved) thick set jointed with grey cement and pigment and pointed in neat cement slurry including 15 mm thick screed bed of CM(1:6) in floors complete all as specified and directed.
11All per item herein above but except tiles complete all as specified and directed.
12M&L for Providing and laying 60mm thick factory made rubber moulded chamfered edge cement concrete coloured, glossy finish paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; Complete all as specified and directed.
13All per item herein above but except tiles complete all as specified and directed.
14Dismantling wrought iron or mild steel work of such as grill/roof purlin etc not otherwise provided for complete all as specified & directed.
15S&F structural rolled steel work in joist, channels, angles or tee sections, fixed ,post independently without connecting plates, etc.,conf to Fe 410-W (Gde-E-250) quality 'B'. complete all as specified and directed.
16M&L for Precast cement concrete louvers and jallies, 25mm thick (mea sured solid), including all mould- ings but excluding frame set in cement mortar 1:4 precast cement concrete type Bo 1:2:4 (12.50 mm graded aggregate ) incl dismantling of existing jallies complete all as specified and as directed.
17Demolition of cement concrete of any description and in any position, provided for complete all as specified and directed.
18M&L PCC in foundation type C 2, 1:3:6 ( 40 mm gde stone aggregate) as in foundation,filling and mass concrete complete all as specified and directed.
19M & L 75mm th PCC 1:3:6 type C-2 as in Floors, Paving, Hard standings & plinth protection, finished even and smooth wthout using extra cement complete all as specified and directed .
20M&L for Non structural steel framed work such as grill, grating, Gates etc. with ends of bars shouldered or rebated or forged into spike, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.
21M& L for mild steel black sheet in door 1.60 mm thick in steel gate and in similar work cut to size ,holes punched ,including round heraded screws ,cut nails or revets,and fixed to wood or steel framing with plain 40 mm lap joints with reveted or welded sams including or turning up,mitred complete all as specified and directed.
22M&L for Two coats of synthetic enamel paint over a coat of red oxied primer including preparation of new steel surface of any description over 10 cm width and girth complete all as specified and directed.
23Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar incl arches, pillers etc complete all as specified and directed.
24M&L for precast cement concrete block walling exc. 10 cm width with solid block PCC 1:3:6 type C1 ( using 20 mm graded stone agg) and setting in cement mortar (1:6) complete all as specified and directed.
25All as per item herinabove but except precast concrete block set in CM 1:4 complete all as specified and directed.
26M & L for Walling of random rubble stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:4, brought up to courses, complete all as specified and directed.
27M & L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cm 1:4 complete all as specified and directed.
28M&L for rendering 15mm thick on other than fair faces & brick or concrete surfaces in CM (1:4) finishing even without using exta cement fair complete all as specified and directed.
29M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement,including form, moulds, mitred/ stopped ends etc complete all as specified and directed.
30Add or deduct for each 25 mm girth or part thereof over or under 30 cm in cement concrete, using extra cement, including form, moulds, mitred/ stopped ends etc complete all as specified and directed.
31Welding in repairs in steel gates ,garages and in steel joinery work n.exc.2.5 CM in length and thickness of metal n.exc. 6mm complete all as specified and directed.
32Excavation in trenches not exc 1.50mtr wide and not exc 1.50mtr in depth for foundation etc and getting out in soft / loose soil complete all as specified and directed.
33Removing of excavated soil to a distance not exc 50mtrs and depositingwhere directed at a level not exc 1.50 mtrs above the starting point complete all as specified and directed by Engr-in-charge.
34Dismantling fencing wire mesh,any type complete all as specified and directed.
35Dismantling posts or struts (wood, steel or R.C.C.) any section, embeddded in concret ,brick work masonry etc including taking out embedded portion and making good disturbed ground as complete all as specified and directed.
36S&F Non structural rolled steel work in Fencing post and strut including cuting tops to shape as directed, drilling holes, notching for wire, etc including all necessarydrilling, bolting or rivetting etc and similar work conforming to Fe-290, Gde-E-165) complete all as specified and directed .
37S&F Chain link MS galavanised fencing including line wires, of mesh size 50x50x 3mm dia wire including standard rail, straining bolts etc complete all as specified and directed .
38M&L for mild steel round bars10 mm dia complete all as specified and directed .
39S&F in repairs galvanised strand, steel barbed wire 2.24mm dia barbed dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.
40S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt n exc 5cm long and dia of neck 11 to 15mm complete all as specified and directed .
41M&L for preparation of new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.
42M&L for preparation of new steel surfaces of any description, exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56612694
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 30 Lakhs
LAST DATE 13-08-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/ Maintenance To Hard Standing/ Platform, Plinth Protection, Apron, Rain Water Pipe, Sunshades, Chajjas And Other Structural Elements In Residential And Tech Area At Diat(Du) & Milit Girinagar, Pune-25
Basic Detail
Tender No GE I R AND D GNR TOKEN 29 OF 2026-27(8017)
Bidding Type Tender
Location
City Pune
State Maharashtra
Key Dates
Publish Date 22 Jul 2026
Submission Date 13 Aug 2026
Open Date 15 Aug 2026
Finance
Tender Value 30 Lakhs
Tender Fee 500
EMD 60000
Exemption Not Available
Document List
513a849a-6dfb-45ec-ad25-0985e26991cb.html
BOQ_873897.xls
TENDERDOCUMENT.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 22, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 13, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Aug 15, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 14 days

Tender Documents

Download All (ZIP) ↓
html

513a849a-6dfb-45ec-ad25-0985e26991cb.html

xls

BOQ_873897.xls

pdf

TENDERDOCUMENT.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders