Tender For Repair/Maint And Upkeep Of External Electric Supply System, Replacement Of Unsv Ug Cable/Switch Gears, Connected Items At Anand Parbat Mil Stn Under Ge (North) Delhi Cantt - 10
Tender Value
40 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
19 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint And Upkeep Of External Electric Supply System, Replacement Of Unsv Ug Cable/Switch Gears, Connected Items At Anand Parbat Mil Stn Under Ge (North) Delhi Cantt - 10
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5m depth for laying under ground cable/pipes in loose/soft soil all as specified and directed. |
| 2 | All as per the description of srl item No 01 but Hard/dense soil. |
| 3 | All as per the description of srl item No 01 but Soft/disintegrated rock. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm all as specified and directed. |
| 5 | Removal of surplus soil obtained from excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed. |
| 6 | M&L for sand cushioning for protection of cables with screen wash river sand and punning to proper required cover all as specified and directed. |
| 7 | M&L for bricks of sub class ‘B’ bricks, for cable protection in trenches laid dry and flat all as specified and directed. |
| 8 | Supplying and laying un-reinforced precast concrete cable cover class HV, Type 1, flat, size 300mmx l80mm x 40mm , as specified and directed |
| 9 | Supply, laying, jointing, testing and commissioning in replacment LT underground cables 1100 volts grade, PVC insulated XLPE and PVC sheathed, heavy duty armoured, with multistranded aluminium conductors 10 sqmm 2 core laid in trenches, fixed to pole/wall incl taking down unsv complete any size,type&core complete all as specified and directed. Note:- Earth work,cable protection,sand fillings,cable joint shall be measured and paid separately. (Make- Havells/Polycab/Universal) |
| 10 | All as per the description of srl item No 09 but 16 Sqmm 3.5/4 Core. |
| 11 | All as per the description of srl item No 09 but 25 Sqmm 3.5 Core. |
| 12 | All as per the description of srl item No 09 but 35 Sqmm 3.5 Core. |
| 13 | All as per the description of srl item No 09 but 50 Sqmm 3.5 Core. |
| 14 | All as per the description of srl item No 09 but 70 Sqmm 3.5 Core. |
| 15 | All as per the description of srl item No 09 but 95 Sqmm 3.5 Core. |
| 16 | All as per the description of srl item No 09 but 120 Sqmm 3.5 Core. |
| 17 | All as per the description of srl item No 09 but 150 Sqmm 3.5 Core. |
| 18 | All as per the description of srl item No 09 but 185 Sqmm 3.5 Core. |
| 19 | All as per the description of srl item No 09 but 240 Sqmm 3.5 Core. |
| 20 | All as per the description of srl item No 09 but 300 Sqmm 3.5 Core. |
| 21 | All as per the description of srl item No 09 but 400 Sqmm 3.5 Core. |
| 22 | Supplying, laying, jointing testing and connecting in replacement XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, 11 KV grade, IS 7098 marked,size of 300 sqmm 3 core suitable for HT 11 KV(E) system, laid in trenches,fixed to pole/wall incl taking down unsv complete all as specified nd directed. Note :- Earth work,cable protection,sand fillings,cable joint shall be measured and paid separately. (Make- Havells/Polycab/Universal) |
| 23 | All as per the description of srl item No 22 but size 240 sqmm 3 core |
| 24 | All as per the description of srl item No 22 but size 185 sqmm 3 core |
| 25 | All as per the description of srl item No 22 but size 95 sqmm 3 core |
| 26 | Laying only (Re routing) serviceable any type of cable up to 300 sqmm 2/3/ 3 ½ /4 core size all as specified and directed. Note:- Excavation, sand, bricks and connected items shell be measured and paid separately. |
| 27 | Laying only old bricks over the sand cushioning dry and flat for cable protection. Note:- Bricks obtained from the removing of UNSV cable and re routing cable) |
| 28 | Testing the cables with high voltage DC testing machine and locating the fault in the cables by fault locating machine to pin point exact position of fault, disconnecting faulty 11 KV HT cables of different sizes from both ends, removal of Fault, Re-connections and testing of cables after removal of fault complete all as specified and directed.Note: (a) Excavation,earth work,cable & joints shall be measured and paid for seperately under respective items of schedule. (b) Retrieved old serviceable cable cover/bricks will be laid in trenches for cable protection. If extra PCC cover/bricks and sand required at site shall be measured and paid separately under respective items of BOQs. (d) Material and labour for emergency maintenance work of HT/LT cable line during breakdown by deploying skilled labour and electricians at faulty site having gang of minimum 4 persons including transportation and other tools and plant required at site for fault rectification.(e) Contractor or his rep shall come to the site of breakdown within two hours of notification of breakdown. In case the contractor or his rep shall not come to the site of breakdown and start attending breakdown within two hours, a penalty of Rs 600 per fault per hour shall be imposed over contractor and shall be deduct from his dues. |
| 29 | All as per the description of srl item No 28 but 1100 Volt LT cables |
| 30 | Taking out faulty underground 1100 Volt LT cable of different sizes by excavation and removing bricks of any size and relaying in the same trenches or re routing after rectification of fault or replacing faulty portion of cable with new cable and removing of surplus soil and using new bricks as required. Note: (a) 1100 Volt LT cable & joints shall be measured and paid for seperately under respective items of schedule. (b) Retrieved old serviceable bricks will be laid in trenches for cable protection. If extra bricks/PCC cable cover and sand required at site shall be measured and paid separately under respective items of BOQs.(c) Excavation and earth work will be measured and paid for seperately under respective items of schedule. |
| 31 | All as per the description of srl item No 30 but 11000 Volt HT cables |
| 32 | Supply, fixing and testing straight through joint heat shrinkable type with jointing kit suitable 16 sqmm to 95 sqmm x 3.5/4 core for cable XLPE insulated armoured heavy duty aluminium conductor 1100 Volts grade incl taking down unsv complete all as directed. |
| 33 | All as per the description of srl item No 32 but 120 sqmm to 300 sqmm complete. |
| 34 | Supply and fix Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination 3 core 95 sqmm heat shrink type joint complete with jointing material and accessories suitable for XLPE armoured aluminium conductor cable incl taking down unsv complete all as specified and directed. |
| 35 | All as per the description of srl item No 34 but 3 core 120/185 Sqmm |
| 36 | Supply and fix Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination 3 core 95 sqmm heat shrink type joint complete with jointing material and accessories suitable for XLPE armoured aluminium conductor cable incl taking down unsv complete all as specified and directed. |
| 37 | All as per the description of srl item No 36 but 3 core 120/185 Sqmm |
| 38 | Supply and fix Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core 95 to 300 sqmm XLPE armoured aluminium conductor cable incl taking down unsv complete all as specified and directed. |
| 39 | Material and labour for disconnecting faulty/burnt end or portion of cable by removing the cable from loop including necessary excavation & earth work, relaying and reconnecting the cable by removing faulty/burnt portion of cable and preparing fresh terminals with suitable size of aluminium cable terminal ends in Panel Boards/Loop boxes for 16 Sqmm 3.5/4 core to 95 Sqmm 3.5 core of LT cable to LT Panel/pole/main switch complete and restore electrical connection complete all as directed. |
| 40 | All as per the description of srl item No 39 but 120 sqmm to 300 sqmm complete. |
| 41 | M&L for painting of transformer/voltage stabilizer of capacity 100 to 500 KVA with synthetic enamel paint (Two coats) of existing colour, with spraying machine, after cleaning, scrabing, preparation of outer surface of transformer including writing of SM No, MES and capacity of transformer complete all as specified and directed. |
| 42 | S&F in replacement, Silica Gel for transformers,capacity upto 100 to 500 KVA complete all as specified and directed. |
| 43 | S&F in repairs for temperature gauge for transformers 0-100 degree celsius complete all as specified and directed. |
| 44 | M&L for ON load centrifuging and dehydration including filteration and cleaning of transformer oil by dehydration machine of 11/0.433 KV transformer at site and topping up deficient transformer oil including testing of samples before and after dehydration and filteration achieve dielectric strength 50-60 KV complete all as specified and directed.Note :- 1. Deficient quantity of Transformer oil required for top up shall be measured and paid separately under relevant items of this Schedule. 2. Centrifuging Machine with all T&P & testing machine of oil required for dehydration shall be arranged by the contractor. |
| 45 | Supply & filling new transformer oil of having dielectric strength 60 KV to top up level complete all as specified and directed |
| 46 | S&F in repair LT Porcelain bushing with brass stud screwed with brass nuts, bolts and cork washer for transformer of capacity upto 500 KVA complete |
| 47 | S&F in repair HT 11 KV porcelain bushing with brass stud screwed with brass nuts, bolts and cork washer for transformer of capacity upto 500 KVA complete |
| 48 | M&L for replacement of fibre gasket sheet 3 mm thick to prevent leakage from transformer 11/0.433 KV ratio, upto 500 KVA capacity complete |
| 49 | M&L for replacement of porcelain insulator with suitable rubber 'O' ring for HT side bushing of transformer upto 630 KVA complete |
| 50 | All as per the description of srl item No 49 but for LT side bushing |
| 51 | M&L for chequered plate 5mm thick of required size for cable duct cover as required at site incl cutting & welding including lifting arengment of duct cover complete all as directed |
| 52 | Material and labour for servicing /testing of breaker/control panel of VCBs including CT, PT and relays in control panel of of capacity 630 Amps and rating 11 KV complete as details mentioned as under:- (a) Details of servicing of breaker :-(i) Adjustment of mechanism if required. (ii) Clean the circuit breaker to remove dust and dirt. The envelope of the vacuum interrupter and insulating materials shall be wiped with a clean cloth. (iii) Apply a small amount of oil to rotary sections, sliding surfaces, pins, coupling section, etc.use grease for the operating shaft and bearings, and machine oil for other parts. (iv) Check for rust and wear. (v) Check Spring Tension and pitting of the Cluster Contacts. (vi) Visual check for rust and deformation. (vii) Check for loosened bolts and nuts, broken spring washers and snap pins etc. (viii) Check for loosened connections, rust, damaged lead wires. (ix) Check whether the contacts are damaged by arcing. (x) Checking of control circuit & tighten the connections if any. (xi) Check close & trip coil. (xii) Checking of Jaw Contacts Conditions and repair/adjust. (xiii) Replace the jaw contacts,If required .(xiv) Improvement of resistance of epoxy insulator and epoxy body by applying post heated varnish .(xv) Replacement of Dashpot/shock absorbers .(xvi) Replacement of carbon brush of spring charging motor (b) The following test shall be carried out:- (i) Primary Injection Test of CT / PT (ii) Closing & Opening Timing Test for all three poles. (iii) IR Test with megger in open and closed condition. (c) Testing of following relays of control panel with Secondary Injection Kit ,checking and programming of relay : - (i) Over current and earth fault relay (d) Testing of followig Aux relay:- (i) DC Supply supervision relay. (ii) Master trip relay Note:- Spares shall be measured and paid separately as catered in under respective items |
| 53 | Isolate contact assembly |
| 54 | Auxilary switch |
| 55 | Earth contact assembly |
| 56 | Closing push button |
| 57 | Tripping push button |
| 58 | Spring charged indicator |
| 59 | ON/OFF indicator |
| 60 | Plug & socket assembly |
| 61 | Phase barrier (Set of 02 Nos with nuts & bolts) |
| 62 | Flexible copper connector |
| 63 | Support insulator suitable for ABB Vmax model VCB |
| 64 | Manual spring charging handle |
| 65 | Tripping coil assembly |
| 66 | Closing coil assembly |
| 67 | Limit switch |
| 68 | Emergency tripping button |
| 69 | Shutter assembly |
| 70 | Opening lever for circuit breaker racking in/out |
| 71 | S&F in repairs of heater suitable for 11 KV HT panel all as specified. Make: As per sample |
| 72 | S&F in repairs of thermostat suitable for 11 KV HT panel all as specified. Make: As per sample |
| 73 | S&F in repairs of LED Lamp as per colour scheme suitable for 110 volt DC supply for mounting on HT Panel all as specified. Make: As per sample |
| 74 | S&F in repairs of digital electronic three phase earth fault and over current relay panel mounting type, 3 phase,110 V (L-L+B93 ), MC61A model of L&T, including necessary connection/modification with suitable and including copper cable and other connected accessories for mounting on existing HT panel, Cat pt No.MC61ANX2200 of L&T /C&S/ABB or Equivalent. |
| 75 | S&F in repairs of power pack unit suitable for 220 volts AC input & 110 volts DC output complete with 12 volts, 7 Ah sealed lead acid batteries and suitable ammeter, voltmeter, switches etc suitable for operation of HT Panel all as specified and directed. |
| 76 | S&F in repairs of 2X12V DC battery with Battery charger with suitable burden for motor operation with input voltage of 230 V AC and out put voltage of 24 V DC |
| 77 | S&F in repairs of digital Trivector meter for 11 KV HT Panel mounting type including necessary connection/modification with suitable and including copper cable and other connected accessories for mounting on existing HT panel. Make Conzerve EM 6400 or equivallant |
| 78 | S&F in repairs of TNC switch suitable for operation of VCB 630 amp of ABB V max model make installed in HT panel 11 KV all as specified. Make - as per sample |
| 79 | S&F in repairs of 11KV fuse tubular type, 11KV/1A suitable for operation of HT Panel all as specified and directed. Make: as per sample |
| 80 | S&F in repairs of spout insulator/cable boots suitable for 630 amps HT VCB of ABB V max model make installed in 11 KV HT panel all as specified. |
| 81 | Checking the existing pressure of SF6 Gas in Gas Chamber of 11 KV , upto 630 Amps RMU before filling and rectifying any leackage and topping up the SF6 gas in the chamber of RMU including supervision of gas filling/topping up process and checking the pressure of gas after filling complete all as directed at site.Note: SF6 gas will be measured and paid separately.) |
| 82 | Supply and filling SF6 gas cylinder complete all as directed. |
| 83 | Disconnection of all electric connection & taking out old/defective Current Transformer (CT) from 11 KV VCB panel and Supply, fixing, installation & testing of Current transformer, indoor, epoxy cast, 11000 Volts, 50 Hz, ratio 200-100/5A suitable for operation of HT Panel all as specified and directed. Make: STI or equivallent |
| 84 | All as per the description of srl item No 83 but 60-30/5A amps complete. |
| 85 | M&L for disconnecting of all elecric supply, taking out electric incoming and out going cables from existing loop box, breaking of coping and foundatin complete existing postion shifting and fixing of electrical pole with light fitting at new location including necessary earth work and PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) work as directed and connecting of incoming and outgoing cables, etc., complete all as directed. |
| 86 | M&L for boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique with out disturbing top surface of the road and necessary machine including HDPE pipe of 100 mm dia suitable for 0.6 mpa working pressure complete all as specified and directed. Note : Necessary infrastructure reqd for boring shall be arranged by the Contractor at his own cost. |
| 87 | M&L for Cutting of road/path for laying of GI tubing and making the good to disturbed road/ path including provision of PCC 1:2:4 type B-1 using 20mm graded stone aggregate all as specified and directed. |
| 88 | M&L for steel tubes, light grade galvanised 100 mm bore laid in trenches/walls and spreading for cable cushioning/protection all as specified and directed incl taking down old unsv complete. |
| 89 | All as per the description of srl item No 88 but 80 mm bore. |
| 90 | M&L for taking down carefully of existing factory made bus duct sandwitch type epoxy casst resin or polyester film (3 layer) insulated minimium class 'B' made of high conductivity aluminuum bars 1000 Amp TPN + Aiuminium earth strip Bus duct (50 KA for 1 Sec ) 1000 Amp TPN + Aiuminium earth strip Bus trunking (straight length ) ( neutral 100 %) 433 V three phase, neutral + earth system & housed in 1.6 mm electro galvanised steel epoxy coated or Al- Mg alloy (Powder coated finish) housing, for in door type installation including end termination, flanged end and bend/elbows (Vertical & horizontal) up to 12mtrs length after servicing refixing the same with supporting clamping systems as reqd at site with suitable size nut and bolts complete all as specified and directed. |
| 91 | M&L for replacement of copper fiexible strips as per exisiting sample for suitable of factory made bus duct sandwitch type aluminuum bars 1000 Amps TPN with suitable size nut and bolts complete all as specified and directed. |
| 92 | M&l for replacement of 2 volts, 60AH tubular cells for Battery charge panel complete the charging operated form 415V,3Ph,50c/s supply complete all as specified and directed. |
| 93 | Servicing of ACBs by taking out Air circuit breaks of capacity 630 to 1000 amps from LT panels cleaning all parts internally and externally checking of the proper tension of the springs mechanical mechanism, tightening of connection of moving, fixing contract, floating contacts, servicing of motor, and charging system and re-fixing it on its original position and testing including testing of control wiring of the respective ACBs by the authorised service engineer and shall submit necessary certificate for the same all as specified. |
| 94 | S&F in repairs of shutter assembly suitable for 3 pole ACB upto 1000 amps capacity complete with all accessories all as specified. |
| 95 | S&F in repairs of arc chute (set of 3) suitble for 3 pole ACB up to 1000 Amps capacity complete with all accessories all as specified. |
| 96 | S&F in repairs of floating isolating contacts (set of 3) suitable for 3 pole ACB upto 1000 Amps capacity complete with all accessories all as specified. |
| 97 | S&F in repairs factory made LT panel LT ACB 800 Amp electric drawn out type 3/4 pole, breaking capacity 65 kA, C- power type, microprocessor based SR18G complete with over load, short circuit earth fault & instanneous fault protection complete with all arrangement to fix in existing make,model in panel including necessary modification in panel& bus bar including taken out the old UNSV ACB complete all as specified and directed. |
| 98 | All as per the description of srl item No 97 but 630 Amps rating complete. |
| 99 | M&L for heavy duty capacitor,1 KVAR rating 415 Volt, 50Hz, 3 phase type including testing, commissioning after taking down old unserviceable capacitors complete all as specified and directed. |
| 100 | All as per the description of srl item No 99 but 3 KVAR |
| 101 | All as per the description of srl item No 99 but 5 KVAR |
| 102 | All as per the description of srl item No 99 but 10 KVAR |
| 103 | All as per the description of srl item No 99 but 15 KVAR |
| 104 | All as per the description of srl item No 99 but 25 KVAR |
| 105 | All as per the description of srl item No 99 but 50 KVAR |
| 106 | S&F in replacement 4 pole power contactor MCX 23/MNX 25 type for Street light/APFC panel complete all as specified and directed. |
| 107 | Supply and fixing in repairs Auxilary control Contactors side mounting Add On's (1NO+1NC) as per existing capacity at respective site complete all as specified and directed. |
| 108 | Supply & fixing in replacement of new Power contactor of capacity 360 Amp 4 pole,415 volts with side mounting, MCX type auxilary contacts operable at 220 V, 50Hz including takingdown of defective Power contactor from AMF panel complete all as specified and directed. |
| 109 | S&F in replacement of onload changeover switch, 100 Amps four pole, 415V AC complete. |
| 110 | All as per the description of srl item No 109 but 250Amps |
| 111 | S&F in repairs for fire Extinguisher CO2 (ABC type) maximum capacity of 4.5 Kg. as per the IS 2878 complete all as specified and directed. |
| 112 | S&F in replacement of MCCB, 63Amps with breaking capacity 16kA,4 pole, 415V AC, fixed/adjustable type including suitable spreaders complete all as specified and directed. |
| 113 | All as per the description of srl item No 112 but 100 Amps with breaking capacity 16kA |
| 114 | All as per the description of srl item No 112 but 125Amps with breaking capacity 16kA |
| 115 | All as per the description of srl item No 112 but 160 Amps with breaking capacity 25kA |
| 116 | All as per the description of srl item No 112 but 200Amps with breaking capacity 25kA |
| 117 | All as per the description of srl item No 123 but 250 Amps with breaking capacity 35kA |
| 118 | All as per the description of srl item No 112 but 315/320 Amps with breaking capacity 35kA |
| 119 | All as per the description of srl item No 112 but 400Amps with breaking capacity 36kA |
| 120 | S&F in replacement of MCCB, 100Amps with breaking capacity 16kA, three pole, 415V AC, fixed/adjustable type including suitable spreaders of following capacity |
| 121 | All as per the description of srl item No 120 but 125Amps with breaking capacity 16kA |
| 122 | All as per the description of srl item No 120 but 200Amps with breaking capacity 36kA |
| 123 | All as per the description of srl item No 120 but 300Amps with breaking capacity 36kA |
| 124 | S&F in repairs for informatory/eqpt history sign boards of size not less than 900 x 600 mm rectangular type with 2 mm thick MS sheet plain type made out of angle iron channels frame, back ground and epqt history details(i.e. Name, Make, Ser No,Capacity of eqpt, Vintage, SM/MES No etc.,) with high intensity retro reflective sheet letters as specified colours (blue and white) complete all as specified and directed. |
| 125 | Supply and laying in replacement of synthatic insulating mat of size 2mtr x 1mtr x 2 mm all as specified and directed. |
| 126 | All as per the description of srl item No 125 but size 2mtr x 1mtr x 2.5 mm. |
| 127 | Material & Labour for repairs of cross arms, bracings, supports, clamps, angle iron, flats and back plates febricated from MS structural steel sections including nuts, bolts and washers of suitable sizes including welding, bending (cold or hot), drilling holes for bolts in any shape or size as indicated or directed and inclusive of two coats of aluminum paint over one coat of red oxide primer, complete all as specified and directed. |
| 128 | M&L for Shifing and relocating of transformer in AOR upto 500 KVA capacity pole/plinth/trolley mounted indoor/outdoor type incl removing and refixing necessary cable connections complete all as specified and directed. Note: (i) Necesary T&P complete shall be arranged by the contractor. (ii) During shiting process damage any exist infrastructure the same is make good by his own cost. Please Enable Macros to View BoQ information |
| 129 | M&L for Shifing and relocating of transformer in AOR upto 500 KVA capacity pole/plinth/trolley mounted indoor/outdoor type incl removing and refixing necessary cable connections complete all as specified and directed. Note: (i) Necesary T&P complete shall be arranged by the contractor. (ii) During shiting process damage any exist infrastructure the same is make good by his own cost. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender