Tender For Repair/Replacement And Periodical Work To Security Wall And Other Connected Work In Otm Area Under The Aor Of Age B/R-I Of G E (North) Delhi Cantt-10
Tender Value
48 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
12 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement And Periodical Work To Security Wall And Other Connected Work In Otm Area Under The Aor Of Age B/R-I Of G E (North) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) of any descriptioin and in any position not other wise specifically provided complete. |
| 2 | Demolition of reinforced cement concrete in any descriptioin and in any position not other wise specifically provided complete. |
| 3 | Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM(1:4) incl demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified. |
| 4 | All as per the description of srl item No. 3 above but except brick complete. |
| 5 | M&L for providing plain cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm I height, copings, kneelers, apex stones, bed plates, kerbs not provided for in water roughs and the like including weathering, slightly rounded or chamfered angles and throating as directed. |
| 6 | M&L 15 mm thick Ready mix plaster (Make:- Ultratech readiplast /Birla Aerocon RMP /ACC Suraksha RMP ) on brickwork or concrete surfaces of wall (external surface ) finished even and smooth including Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots complete all as specified and as directed by engr-in-charge. |
| 7 | M&L 15 mm thick Ready mix plaster (Make:- Ultratech readiplast /Birla Aerocon RMP /ACC Suraksha RMP ) on brickwork or concrete surfaces of wall (external surface ) finished even and smooth complete all as specified and as directed by engr-in-charge. |
| 8 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground , complete all as specified and directed. |
| 9 | Dismantling of fencing wire mesh, any type, complete all as specified and directed. |
| 10 | Dismentling wrought iron or mild steel work of any description not other wise provided. |
| 11 | Excavation in post holes (or similar holes ) each n. exc 0.5 Cum in soft/loose soil, getting out,removing soil to a distance n. exc 50M , complete all as specified and directed. |
| 12 | Plain cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified and directed. |
| 13 | Mild steel angle iron posts and struts, MS flat iron fillet securing chain link fencing confirming to FE-290 E-165 as in fencing including cutting tops for required shape, drilling holes,bolting, notching for wire including all necessary drilling of similar work, complete all as specified and directed. |
| 14 | Supply only Chain link fencing including wires, mesh of size 50x50mm or 75x75m, weight not less than 3.0-4.0 Kg/Sqm confirming to IS, type standards rails, straining bolts etc including provision of binding wire, complete all as specified and directed. |
| 15 | Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire, complete all as specified and directed. |
| 16 | Mild steel round bars 10 to 12mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 17 | S&F in Repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc.as directed (each line wire to be measured). |
| 18 | Restraining & resecuring existing barbed wire of any type incl making good staples etc any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc (each line wire to be measured) complete all as specified. |
| 19 | S&F MS screw bolts (machine made) with hexagonal or square heads at one ends and screwed the other, or screwed both ends, each screwed end to be fitting with washer and one hexagonal or square nut n.exc. 5cm long and dia of shank 8 to 10 mm etc. |
| 20 | M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete. |
| 21 | Supply & fixing Galvanised Concertina coil punched type 600mm dia, 10 m openable length (total length 90m) having 50 Nos round per 6 m lenght, dia of Core wire 2.5 mm(+/- 1mm) with tensile strength of 160Kg/Sqm, thickness of galvanised rozer blade 0.6 mm (+/- 0.5mm) of 30mm length, fixing/securing or tying in position over existing barbed bire and Y shaped angel iron un to 3.0 m ht of wall incl provn of MS wire stapples or steel pins etc, in dismantling of old concertina coil complete all as specified and directed.Note:- Y shaped angle iron and barbed wire shall be measure and paid seperately |
| 22 | M&L for preparation of old plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm using auto-roller and airless paint sprayer incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 23 | M&L for preparation of new plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm using auto-roller and airless paint sprayer complete all as specifiec and as directed. |
| 24 | S&F rolled mild steel as in doors or gate of angle of other section with gusset plates, rails, braces,frame work of GRC jali, etc coplete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fitting(exlusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. |
| 25 | RCC design mix M-25 forFoundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete |
| 26 | M&L for one coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed. |
| 27 | M&L for exterior wall tiles 8 to 10mm thick & not exc 0.18 sqm in size , colour & shade of tiles as approved by Engr-in-charge,set and jointed in neat cement slurry and pointed in coloured cement to match the surface over 10 mm thk backing coat in CM 1:4 including taking down old tiles complete all as specified and directed by Engr-in-Charge. |
| 28 | M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings incl taking down/rempvong old plater suface or pointing of any type and complete all as specified.Note:- Payment for providing grooves shall be measured and paid separately. |
| 29 | S&F Factory Made 18mm thick 100% Solid WPC Jali (Wood polymer Composite) design of Jali as approved, comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing compancy. |
| 30 | S&F Frame work of WPC Size of frame 75 mm x 50 mm all as per directions of Engr-in-Charge. |
| 31 | S&F of Angle Iron frame work for fixing of frames of Jali, Grill, Gratings, claddings and other similar works as directed by Engr-in-Charge. |
| 32 | S&F 2mm thick fibre glass reinforced translucent sheeting fixed with proper side lap fixed with coach screw and washer in iron gate,roof,wall etc including dismantling of old sheet of any type complete all as specified and directed. |
| 33 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thk of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as in roof incl dismantling of old sheets of any description complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender