Tender For Repair. Overhauling, Replacement By Supply, Fabrication, Transportation, Erection With Painting And Testing Of 10 (Ten) Nos, Spillway Radial Gates Of Size 12.190 Mtr X 12.190 Mtr With Hoisting Arrangements And Repair To Cracks & Nose Porti
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Aug 2026
8 days left
EMD
58551
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Malkangiri → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair. Overhauling, Replacement By Supply, Fabrication, Transportation, Erection With Painting And Testing Of 10 (Ten) Nos, Spillway Radial Gates Of Size 12.190 Mtr X 12.190 Mtr With Hoisting Arrangements And Repair To Cracks & Nose Portion Of The Piers Of Spillway Of Balimela Dam (Joint ) Project As Per Drawings, Scope Of Work And Instruction Of Engineer-In-Charge
BOQ
| Sl. No. | Item Description |
| 1 | RADIAL GATES-(Size 12.190 Mtr. x 12.190 Mtr.) |
| 2 | Overhauling of trunnion assembly by greasing trunnion pins by grease guns , labour,including hire charges of machinery, equipments, tools & tackles oxygen, DA etc and as per direction of Engineer-in-charge.. |
| 3 | Replacement by dismantling pressure plates,m.s. flat etc. & removing old and damaged Rubber seals (including fabrication and machining) of Radial gate with fitting of new Rubber seals to be supplied by Corporation including labour, hire charge of machinery, equipments, tools & tackles, oxygen, DA etc and as per direction of Engineer-in-charge.Materials will be supplied by job worker. |
| 4 | Repair of Guide rollers of Radial Gate by dismantling, overhauling & replacement of damaged parts & new bronze bush,structural steel for guide roller, ss of guide roller pin and guide roller bracket supplied by job worker including machining , greasing , labour, hire charge of machinery, equipments, tools & tackles, oxygen, DA etc and as per direction of Engineer-in-charge |
| 5 | Painting of upstream & downstream side of 10 Nos. of radial gate including skin plate, horizontal girder, end arm, trunnion assembly after surface preparation by blast cleaning process, performed with sand as per requirements and class 'A' of IS : 14177:1994. After blast cleaning, the surface should be cleaned from loose dust and debris preferably by air blast with help of blower. Over the prepared surfaces two coats of zinc rich primer should be applied to give a total dry film thickness of 70 ± 5 microns followed by two coats of solvent less coal tar epoxy paint applied at an interval of 24 hours. Each coat should give a minimum dry film thickness of 150±5 microns. The total dry film thickness of all the coats including primer coating should not less than 350 ±5 microns as per IS: 14177:1994 including sand, labours, machinery, equipments, scaffolding etc, but excluding paints, primer, thinner to be supplied by OCCL. |
| 6 | .Replacement by dismantling, removing old & damaged Turn buckles of Radial Gate with fitting new ones (to be supplied by Corporation) including labour, hire charge of machinery, equipments, tools & tackles, oxygen, DA etc and as per direction of Engineer-in-charge |
| 7 | Replacement by dismantling, removing old and damaged Socketted wire rope assemblies of Radial Gate with fitting of new ones to be supplied by Corporation and equalising with turnbuckles including labour, hire charge of machinery, equipments, tools & tackles, oxygen, DA etc and as per direction of Engineer-in-charge. Cardium compund will be supplied by Job Worker. |
| 8 | Repair of worm reducers of Radial Gate by dismantling, overhauling & replacement of damaged parts( to be supplied by Corporation) including labour, hire charge of machinery, equipments, tools & tackles, oxygen, DA etc and as per direction of Engineer-in-charge |
| 9 | Replacement of old position indicator with new one (new position indicator shall be supplied by OCCL.) including labour, hire charge of machinery, equipments, tools & tackles, oxygen, DA etc and as per direction of Engineer-in-charge |
| 10 | Greasing all gear, pinion, rope drum, bearing& housing, gear oil topping in worm reducer, application of cardium compound on socketted wire ropes, alignment of worm reducers, alignment of lineshafts including labour, hire charge of machinery, equipments including supply of bearing grease, cadmium compound, labour, hire charge of machinery, equipments, tools & tackles oxygen, DA etc and as per direction ofEngineer-in-charge |
| 11 | Painting of rope drum hoisiting arrangements of 10 Nos. of Radial Gates after surface preparation by blast cleaning process, performed with sand as per requirements and class 'A' of IS : 14177:1994. Over the prepared surfaces two coats of zinc phosphate primer giving minimum dry film thickness of of 40 ± 5 microns per coat followed by one coat of alkyl based Micaceous Iron Oxide paint giving minimum dry film thickness of 65 + 5 microns and two coats of synthetic enamel paints / Aluminium paint conforming to IS: 2932 giving minimum dry film thickness of 25 + 5 microns per coat (For structural components, machinery, unmachined surfaces, machined surfaces) are to be applied with an interval of 24 hours each coat of dry film thickness of all the coats including primer coats not less than 175 microns complete as per IS: 14177:1994 including sand, labours, machinery, equipments, scaffolding etc, but excluding paints, primer, thinner to be supplied by OCC. |
| 12 | CIVIL WORK |
| 13 | Repair to cracks & nose portion of the piers (11 Nos ) of spillway of Balimela Dam (Joint ) Project : TREATMENT OF CRACKS OF PIER:- a) Groove Cutting and cleaning,b) Primimg of Cut Groove and Filling:,c) Nozzle Fixing,d) Filling the construction joints,e) Pluggging the leaking points. All materials to be supplied by Job Worker.Hire charge of machinery, equipments, tools & tackles, scaffolding including labour etc.should be arranged by Job Worker Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender