Tender For Installation Of Sound System And Upgradation At Ashok Udhyan Jodhpur
Tender Value
18.24 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
0 days left
EMD
36480
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of Sound System And Upgradation At Ashok Udhyan Jodhpur
BOQ
| Sl. No. | Item Description |
| 1 | S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. |
| 2 | 25 mm |
| 3 | Add Extra for Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade direct in ground including excavation of trench of size 75 cm (Depth) x 35 cm(Width) , with procedure as per following points:- (a) Make a river sand bed of height 125 mm along the trench, (b) Lay the cable in the middle of the trench, (c) Provide river sand bed of height 125 mm on top of the cable, (d) Lay the protective Common burnt clay F.P.S. Bricks of Class designation 75 / Sand stone slabs of 50 mm thickness and 225 mm wide just above the sand bed vertically across the cable ( Approx. 9 no. Bricks per Mtr.), (e) Backfill the excavated soil leaving 300 mm from the Ground level, (f)Lay the Cable warning tape and again back-fill the remaining portion of the trench upto the ground level and compacting the earth |
| 4 | Supply & Installation of IP-20 & IK-08, Floor mounting Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, Vertical Mounting Rail 1.6 MM with 'U' Marking, front sturdy sheet steel frame folded from one piece and welded with Smm toughened glass door, with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, Set of 75 mm height 4 castors, 2 of which have brakes, Accessories like: 5 Nos of 19\\" lU Horizontal Cable manager, 2 Nos of vertical cable managers, 1 no. Keyboard Tray, 4 Nos of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware, 2 No of 19\\" lU, mountable socket strips with 6 nos of SA universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable complete in all respect. |
| 5 | 17 U Rack with Width 600 mm & Depth 800 mm |
| 6 | 6 core OFC cable |
| 7 | OTDR/OLTS Testing, Splicing |
| 8 | OFC Patch Cord |
| 9 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. |
| 10 | 2x1.5 Sq mm |
| 11 | SITC of rectangular shaped 15 W horn loudspeaker, made from aluminum. The edge of the horn is covered with a PVC profile for protection against impact damage. The rear cover of the horn is made from self-extinguishing ABS (acc. to class UL 94 V0). Water-and dust protected to IP 65 EN 54‑24 certified Rated power (PHC) 15 W Power tapping 15 /10/ 5 / 2.5 / 1.25 W Sound pressure level at 15 W / 1 W (1 kHz, 1 m) 112 / 102 dB (SPL) Opening angle at 1 kHz / 4 kHz (‑6 dB) Horizontal 120° / 35° Vertical 125° / 35° Speaker mount on pole both side view angle ( Dual Direction) considor one unit bidder should provide in tender OEM authorization certificate |
| 12 | SITC of 240W mixer amplifier with following features:u Inbuilt Bluetooth for audio streamingu Supports audio playback from USB pen driveu 4 microphone/line inputs, plus music source input u Insert feature to use as a pre/power amplifieru Optional 2‑tone chime generation for input 1 Technical Specifications:Frequency response 80 Hz to 18 kHz (+1/‑3 dB @ ‑10 dB ref. rated output)Distortion <1% @ rated output power, 1 kHzBass Control Max. ± 8 dBTreble Control Max. ± 8 dB, bidder should provide in tender OEM authorization certificate, |
| 13 | SITC of Handheld microphone with a dynamic transducer element that shall be designed for high speech intelligibility. It should have a rugged enclosure is both stylish and easy to use ina wide range of public and sound reinforcement applications. Polar pattern UnidirectionalFrequency range 80 Hz to 12 kHzSensitivity 1.7 mV/Pa ±3 dBRated output impedance 600 ohmSupplied with 7 m (23 ft) cable, XLR female / 6.3 mm (1/4”) stereo jack plug connection cable |
| 14 | SITC of Wide range of power amplifier from 480W W power amplifier in a 3U high housing with 70 V / 100 V and 8 ohm outputs,Dual inputs with priority switching,100 V input for slave operation on 100 V speaker line,Mains, battery back-up,With Following Features:1.Output power (rms) 480 W2.Frequency response 60 Hz to 18 kHz (+1 / -3 dB at -10 dB ref. rated output)3.Distortion <1% @ rated output power, 1 kHz4.S/N (flat at max volume) >90 dB bidder should provide in tender OEM authorization certificate Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender