Tender For Inasallation Of Block Entry Gate At Kulhama Bridge And Development Of 2 No Of Play Grounds At Kulhama And Chandil,Panchyat Kulhama Block:Chandilwanigam , Scheme: Capex Budget (Bdc) (2026-27)
Tender Value
3.88 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
12 days left
EMD
7760
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Inasallation Of Block Entry Gate At Kulhama Bridge And Development Of 2 No Of Play Grounds At Kulhama And Chandil,Panchyat Kulhama Block:Chandilwanigam , Scheme: Capex Budget (Bdc) (2026-27)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. , 2.7.1 all kinds of soi |
| 2 | Earthwork in excavation in foundation trenches or drains not exceeding 10sqm on plan upto 1.5m, including disposal of the excavated earth lead 50m and lift 1.5m |
| 3 | Filling of good earth incl ramming in layers manually incl cost and carriage of soil |
| 4 | Providing and laying of dry stone soling duly hand packed including carriage by MT= 05 km HL of 200 mtr |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 6 | Providing and laying in reinforced position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.including chequred plates |
| 8 | Providing and fixing of reinforcing steel including cutting, bending ,straightening & laying in position,Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | 16.67 Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-495601 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). 16.67.1 Overhead informatory road signage |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for: 4.6.1 Foundations, footings, bases for columns |
| 11 | Hoisting of board,transportation,crane and installation and painting of steel work |
| 12 | Carriage of sand aggregates by MT 35 Kms & HL of 100 mtr Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender