Tender For Construction Of Bio Medical Waste Management Shed And Dumping Station For General Waste At Govt. Psychiatric Diseases Hospital, Jammu.
Tender Value
3.39 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
8 days left
EMD
7000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Bio Medical Waste Management Shed And Dumping Station For General Waste At Govt. Psychiatric Diseases Hospital, Jammu.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Executive Engineer, Mechanical & Hospital Division GMCH Jammu. Construction of Bio-Medical Waste Management Shed and Dumping Station for General Waste at Govt. Psychiatric Diseases Hospital, Jammu. MHDJ/ MHDJ/e-NIT 138 of 2026-27 Dated: 21.07.2026 Due : 31.07.2026 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Rate including GST to be quoted by the bidder Rs. P Currency Convertion against each Item Quoted Currency in INR / Other Currency Rebate on old parts in Percentage (%) if any Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Net Cost of item Rs. P TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantling of Old Existing Shed by way of engaging 02 welders for 02 days. |
| 3 | (2.8.1)Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil:1x (18’-0’’+18’-0’’+ 12’-0’’+ 12’-0’’+ 12’-0’’) x2’-0”x 2’-0”=288 cft= 8.15 cum |
| 4 | (4.4.7)Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)1x 72’-0’’x2’-0”x 0’-6” = 72cft= 2.04 cum |
| 5 | (4.4.3)Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)a) 1x 72’-0’’x2’-0”x 1’-6” = 216 cftb) 1x 72’-0’’x1’-0”x 1’-0” = 72 cft Total =288 cft=8.16 cum |
| 6 | (4.18)Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete1x 72’-0’’x1’-0” = 72 sft=6.69 sqm |
| 7 | (6.1.4)Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Total = 1x 72’-0’’x 0’-9”x 10’-0” = 540 cftDeduct for Doors= 2x 0’-9’’x7’-0” = 10.5 cftDeduct for Exhaust Fans= 2’-0”x 2’-0”x2 = 8.0 cft 521.50 cft=14.77 cum |
| 8 | (13.1.1)CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 4 ( 1cement : 4 fine sand)Qty. inside= 2(18’-0”+12’-0”)x10’-0”=600 sftQty. outside= 2(18’-0”+12’-0”)x11’-0”=660 sftDeduct for Doors= 2x2x3’-3’’x7’-0” = 91 sftDeduct for Exhaust Fans= 2x2x2’-0”x 2’-0” = 16.0 sft Total=1153 sft=107.17 sqm |
| 9 | (12.13)Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1x 18’-0’’x14’-0” = 252 sft=23.42 sqm |
| 10 | (LMR) Providing and Fitting of Aluminium Doors with frame including all accessories required at site of size 2x3’-3”x7’-0”=45.50 sft as per the Direction of Engineer-in-charge |
| 11 | (13.53) EXTERIOR FINISHING Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm),Qty. vide S.No. 7 i.e. 107.17 sqm |
| 12 | (10.16)Steel work in built up tubular Horizontal Square Tube Section trusses etc., including cutting ,hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes7x18’-0”=126 Rft9x14’-0”=126 Rft252 Rft=76.82 [email protected] Kg/Rm=152.10 Kg |
| 13 | (LMR) Providing & Installation of New Exhaust Fans-(18inch)-02No’s, as per required space at Biomedical Waste Shed of Govt. Psychiatric Diseases Hospital, Jammu by way of drilling/cutting of walls and making holes of required size, plastering of holes & making good for fitting of new heavy duty exhaust fans along with all other allied works. Job also includes Providing of electrical circuits in the said area by providing and laying of copper wire of requisite size, switches, tubelights, modules and sockets where ever required as per site conditions and making all connections and all the fans operational. The fans shall be of Usha/Havells/Bajaj/Crompton makeComplete Job includes cost of material required, skilled labor, carriage and transportation of material to the site, any modifications required as per site conditions and all taxes etc. |
| 14 | (11.3.3)Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate.18’-0”x14’-0”=252 sft=23.42 sqm Total in Figures 23 23 0.0 23 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender