Tender For Remodeling Of Old 6 No. Tube-Wells In Mand Area In Tehsil Indoradistt. Kangra (H.P.)(Sub Head :- Construction of Pump House,C/O 6 Nos Outlet,C/O Delivery Tank And Providing Laying Jointing And Testing Of 180Mm Dia Hdpe Pipe In Distribution
Tender Value
8.59 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
8 days left
EMD
17200
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Remodeling Of Old 6 No. Tube-Wells In Mand Area In Tehsil Indoradistt. Kangra (H.P.)(Sub Head :- Construction of Pump House,C/O 6 Nos Outlet,C/O Delivery Tank And Providing Laying Jointing And Testing Of 180Mm Dia Hdpe Pipe In Distribution System) (Tube Well Teora-I)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation in trenches in earth work in pick work, jumper work within all leads and lifts stacking the excavated soil not more than 3 mtr clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc., consolidating each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed within all leads and lifts as per direction of Engineer-in- Charge. |
| 2 | Providing and laying cement concrete 1:6:12 (1Cement:6sand:12 graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work foundation and plinth in all leads and lifts as per the direction of Engineer-in-Charge. |
| 3 | Providing and laying cement concrete 1:4:8 ( 1 cement : 4 sand: 8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-Charge. |
| 4 | Providing and laying cement concrete work 1 : 2 : 4 ( 1 cement : 2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- |
| 5 | Foundations, footings bases of columns and the like mass concrete within all leads and lifts as per direction of Engineer-in-Charge. |
| 6 | In walls (any thickness) but not less than 0.10 Metre thickness including attached pillasters,buttresses,plinth and string courses etc.from top of foundation level upto any floor level within all leads and lifts as per the directions and satisfactions of the Engineer-in-Charge. |
| 7 | Suspended floors, roofs, landings and shelves and their supports, balconies, beams ,griders bressumers and cantilevers upto all floor level. |
| 8 | Providing and laying cement concrete work 1:1:5:3(1 Cement:1:5Sand:3 crushed stone aggregate 20mm nominal size) and curing complete excluding cost of form work in |
| 9 | (a) Lintels, beams ,griders bressumers and cantilevers upto all floor level. |
| 10 | Random rubble stone masonry coursed with hard stone of approved quality in foun. & plinth i/c racking out of joints in CM 1:6 in all leads & lifts |
| 11 | Providing form work with steel plates 3.15mm.thick welded with angle iron frame 30x30x5mm. so as to give a fair finish in-cluding centring,shuttering,strutting and propping etc.with wooden battens and ballies height of propping and centring below supporting floor to ceiling exceeding upto any height and removal of the same for in-situ-reinforced concrete and plain concrete work in:- |
| 12 | In vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like including entire carriage of material within all leads and lifts as per the directions and satisfactions of the Engieer-in-Charge. |
| 13 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness. |
| 14 | Beams,cantilevers,girders & lintels, sides & soffits of beams, haunching,cantilevers,bressumers 1.00 mts. In depth in all heights from floor. |
| 15 | Providing and laying tor steel reinforcement for RCC.work including bending,binding and placing in position complete upto any floor within all leads and lifts as per the directions and satisfactions of the Engineer-in-Charge. |
| 16 | Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:6 (1cement:6 sand) in all leads and lifts. |
| 17 | Providing wood work in frames of doors, windows and other frames wrought framed and fixed in position with second class Kail wood in all leads and lifts. |
| 18 | Providing and fixing wood paneled glazed or paneled and glazed shutters for doors, windows and clear story 40mm thick windows including bright finished black enameled iron with necessary screws with second class deodar wood 40mm thick in all leads and lifts. |
| 19 | Prov. & fixing wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85 G. with wire of dia. 0.56 mm for doors,windows & clerestrey windows including bright finished black enameled iron hinges with necessary screws. |
| 20 | Cement concrete flooring 1:2:4(1cement:2sand:4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement (40mm thick) in all leads and lifts. |
| 21 | 20 mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6sand) kin all leads and lifts. |
| 22 | 6 mm cement plaster to ceiling in CM 1:3 (1Cement :3 Sand) |
| 23 | Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement:3sand:6 graded stone aggregate 20mm nominal size) including finishing of the top surface of concrete smooth in all leads and lifts. |
| 24 | Applying two coat of wood preservative on new wood based surface after and including preparing the surface by thoroughly cleaning dirt dust and other foreign matter |
| 25 | Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil dirt grease and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink in all leads and lifts. |
| 26 | Painting two coats (excluding priming coat) on new wood and wood based surface with ready mixed paint brushing the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white in all leads and lifts. |
| 27 | Painting two coats(excluding priming coat) on undecorated walls based surface with ready mixed paint brushing the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white in all leads and lifts. |
| 28 | Providing and fixing M.S.fan clamp(Type-I of 16mm dial M.S. Bar bent to shape with hooked ends in RCC. Slab during laying including painting the exposed portion of loop all as per standard design complete. |
| 29 | Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dial meters bolts and nuts and wooden plug and embeding in cement mortar block 30x10x15cm (1:3:6(1cement:3sand:6 graded stone aggregate 20mm nominal size. |
| 30 | Providing and fixing following anodized aluminium fittings of anodized transparent and shade with necessary screw etc.complete |
| 31 | (a) Sliding door bolts 250x16mm. |
| 32 | (b-i) M.S. tower bolts (Barrel type) leads and lifts. 200x10mm. |
| 33 | (b-ii) M.S. tower bolts (Barrel type) leads and lifts. 150x10mm. |
| 34 | (b-iii) M.S. tower bolts (Barrel type) leads and lifts. 100x10mm. |
| 35 | (c-i) M.S. handles 100 mm dia |
| 36 | (c-ii) M.S. handles 75mm dia |
| 37 | Providing and fixing of MS round bars (16 mm) in windows and ventilators. |
| 38 | Providing installation of wiring including required points i.e. 6 No light points, 1 No fan point, 1 No. 45 watt flood light of Bajaj/Havells make , shocket points 5 amp., 1 No. 16 Amp.,3 No. LED Bulbs 8 watt including wiring of required size MCCB etc. required for proper functioning of lighting system at the room or anything else required with in all leads and lifts as per direction and complete satisfaction of Engineer-in-Charge. |
| 39 | Construction of Toilet 1.00 X 1.00 Mtr. Size of standard height and depth made of RCC planks frame and shutter of angle iron and plain CGI sheet WC Indian type and pit including excavation of toilet foundation and soak pit all kids of soil and disposal of surplus excavated earth, filling with course sand, cement concrete flooring 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20 mm nominal size) for rural sanitation system in all leads and lifts as per standard design and drawing or as per the direction of Engineer-in- Charge. |
| 40 | Laying & jointing in trenches 4.00 kg.F/ cm2 working pressure polythiene pipes high density conforming to IS:4984-1995 (PE - 80 grade) PN-4 complete with special flange compression type fittings. (Earth work in trenches to be measured & paid for separately) within all leads and lifts as per the directions and satisfactions of the Engieer-in-Charge. |
| 41 | 180 mm dia HDPE pipe -PN-4 (DT to O/L 1 ,OL1 to OL2, OL1 to OL3, OL3 to OL4, OL4 to OL5 and OL4 to OL6) |
| 42 | Providing and fixing of Cast Iron Alfa Valve of following nominal bore heavy duty reputed make of ISI-Marked as per per the directions and satisfactions of the Engineer-in-Charge. |
| 43 | 200 mm Dia Test run. 8 Hours continueously for 7 days Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender