Tender For Repair/ Maintenance To Steel Furniture And Reweaving Of Charpoy Gi At Af Stn Ad Ur
Tender Value
24.91 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
5 days left
EMD
49820
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance To Steel Furniture And Reweaving Of Charpoy Gi At Af Stn Ad Ur
BOQ
| Sl. No. | Item Description |
| 1 | CHAIR CB STEEL WITH ARMS :- (FD-75(M)) |
| 2 | Replacement of seat made out of 1st class hard wood Shisham duly polished of french polish of any approved shade and woven with cane plastic 2mm wide white of Make Premier brand in Godrej pattern of size 450 mm x 465 mm duly fixed with bolts, nuts and washers complete all as directed. |
| 3 | Replacement back of chair made out of 1st class hard wood Shisham duly polished of french polish of any approved shade and woven with cane plastic 2mm wide white of Make Premier brand in Godrej pattern Size 465 mm x 380 mm duly fixed with bolts, nuts and washers complete all as directed. |
| 4 | Replacement of 1st class hard wood ( Shisham ) handle duly polished with French polish and fitted with frame with screws complete all as specified and directed. |
| 5 | Replacement of PVC/rubber shoes duly fixed with screws all as specified and directed. |
| 6 | M&L for painting of conduit pipe frame with one coat of OG synthetic enamel paint including preparation of surface complete all as specified and directed. |
| 7 | M&L for welding of broken conduit pipe by gas welding complete and finished as per Drg and as directed. |
| 8 | TABLE OFFICE CLERK STEEL:- (FD-84/ FD-1004) |
| 9 | Replacement broken/unserviceable table top with new top made out of 18/19 mm prelaminated particle board, exterior grade of shape and size as per existing top with 6 mm thick teak wood beading all around duly French polished complete all as shown in drg and as directed. |
| 10 | Replacement of broken / unserviceable leg with new leg made out of MS conduit pipe 25 mm dia or square pipe of 1.6 mm thickness welded to frame and applying spray painting with one coat of synthetic enamel paint over a coat of red oxide primer complete all as per drawing and as directed. |
| 11 | M&L for adjustment of drawers by denting etc. to make the same functional complete all as directed. |
| 12 | Replacement of unserviceable locks of drawer with best quality brass locks 6 levers with duplicate keys complete all as directed. |
| 13 | M&L for preparing the old treated steel surface of table removing of old chipped off surfaces and preparing the surface with putty and making it suitable for painting to match the existing surface and applying spray painting with one finish coat of synthetic enamel paint all as specified and directed |
| 14 | M&L for welding of broken legs and stiffener with gas welding as per Drg in table, complete as directed. |
| 15 | TABLE OFFICE OFFICERS STEEL:- (FD-84/ FD-1003) |
| 16 | M&L for removing of old worn out top of table office Officers steel and fixing the new top made of 18/19mm thick block board with 1mm thick teak face plastic laminated sheet and PVC beading all around the top fixed (size 1680 x 870 mm) complete all as specified and directed. |
| 17 | M&L for applying one coat of OG synthetic enamel paint on complete frame before fixing the top including preparation of surfaces complete all as specified and directed |
| 18 | ALMIRAH LARGE STEEL AND RACK STEEL:- (FD-1032) |
| 19 | Replacement of unserviceable mild steel locking device including MS Rod and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as per drg and as directed and and directed/approved. |
| 20 | M&L for adjustment of existing shelves by tightening and replacing clamps of required nos complete all as directed/approved. |
| 21 | Replacement of unserviceable hinges of door shutters of Almirah medium/small steel size as per existing hinge all as per drg and as directed. |
| 22 | Replacement of unserviceable legs of Almirah steel made out of 1 mm thick MS sheet to required shape and design and applying spray painting with one coat of synthetic enamel paint over a coat of red oxide primer complete all as per drg and as directed. |
| 23 | Replacement of worn out/ unserviceable shelves made out of 1mm thick MS sheet to required shape and design and applying spray painting one coat of synthetic enamel paint over a coat of red oxide primer complete all as per drawing and directed/approved. |
| 24 | Replacement of unserviceable shutters with new shutters made out of 1mm thick MS sheet to required shape and design and applying spray painting with one coat of synthetic enamel paint over a coat of red oxide primer complete all as per drawing and as directed. |
| 25 | M&L for Preparing the old treated steel surface of almirah, removing of old chipped off surfaces and preparing the surface with putty and making it suitable for painting to match the existing surface and applying with spray painting with one finish coat of synthetic enamel paint externally in almirah steel all as specified and directed/approved. |
| 26 | ALMIRAH MED STEEL AND RACK STEEL:- |
| 27 | Replacement of unserviceable mild steel locking device including MS Rod and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as per drg and as directed and and directed/approved.(FD-243, FD/E6/MAP/18) |
| 28 | M&L for adjustment of existing shelves by tightening and replacing clamps of required nos complete all as directed/approved.(FD-243, FD/E6/MAP/19) |
| 29 | Replacement of unserviceable hinges of door shutters of Almirah medium/small steel size as per existing hinge all as per drg and as directed.(FD-243, FD/E6/MAP/20) |
| 30 | Replacement of unserviceable legs of Almirah steel made out of 1 mm thick MS sheet to required shape and design and applying spray painting with one coat of synthetic enamel paint over a coat of red oxide primer complete all as per drg and as directed.(FD-243, FD/E6/MAP/21) |
| 31 | Replacement of worn out/ unserviceable shelves made out of 1mm thick MS sheet to required shape and design and applying spray painting one coat of synthetic enamel paint over a coat of red oxide primer complete all as per drawing and directed/approved.(FD-243, FD/E6/MAP/22) |
| 32 | Replacement of unserviceable shutters with new shutters made out of 1mm thick MS sheet to required shape and design and applying spray painting with one coat of synthetic enamel paint over a coat of red oxide primer complete all as per drawing and as directed.(FD-243, FD/E6/MAP/23) |
| 33 | M&L for preparing the old treated steel surface of almirah, removing of old chipped off surfaces and preparing the surface with putty and making it suitable for painting to match the existing surface and applying with spray painting with one finish coat of synthetic enamel paint externally in almirah steel all as specified and directed/approved.(FD-243, FD/E6/MAP/18) |
| 34 | TEAPOY VARANDAH:- (FD-255) |
| 35 | Replacement of old U/S top from teapoy/verandah & providing new top 18mm thick PL bd over all size 900x4540mm teak wood beading all round complete as specified and as directed. |
| 36 | M&L for welding to teapoy verandah at appropriate point complete all as specified enameled white paint before fixing of top complete as specified and as directed. |
| 37 | CHAIR VARANDAH:- (FD-266) |
| 38 | M&L for Re-caning of chair verandah with 4mm wide white colour plastic cane of Shah Brand/Premier as per drawing after painting the frame with one coat of white synthetic enamel paint including removing the old unserviceable cane all as specified and directed. |
| 39 | Replacement of PVC /rubber shoes of chair verandah with new one approved complete as specified and as directed. |
| 40 | M&L for Welding of broken legs with gas welding complete all as per drg and as directed. |
| 41 | TABLE FOR COMPUTER/ CABINET:- (TRADE PATTERN) |
| 42 | M&L for table top of size 1200mm x 600mm made of 18 mm thick one side pre-laminated partial board, one side teak faced covered with 4mm PVC beading all round after necessary minor repair including taking out the old unserviceable table top all as specified shown on drawing and directed . |
| 43 | S&F new drawer 8 mm thick PLywood of size 100mm x 450mm complete as specified and as directed. |
| 44 | CHAIR REVOLVING/ COMPUTER ALL TYPES (HIGH BACK/ LOW BACK) CHAIR CAPSULE:- (TRADE PATTERN) |
| 45 | M&L for removing old back of chair visitor/computer and replacing the same with new back made out from leatherite / rexine cloth, best quality as per the sample approved including U foam cushion of 3\\" thick 32 density as approved by GE, complete all as specified and directed. |
| 46 | M&L for removing old back of chair visitor/computer and replacing the same with new back made out from leatherite / rexine cloth, best quality as per the sample approved including U foam cushion of 2\\" thick 32 density as approved by GE, complete all as specified and directed. |
| 47 | Replacement of old unserviceable PVC wheel from chair executive/revolving with new PVC wheel of best quality as approved by GE, complete all as specified and directeD. |
| 48 | Replacement of old unserviceable hydraulic height adjustment lift of chair computer/chair executive/chair visitor with new hydraulic cylindrical type height adjustment lift of best quality as approved by GE, complete all as specified and directed. |
| 49 | TABLE DINNING STEEL 900 mm x900 mm x760 mm:-(TRADE PATTERN) |
| 50 | M&L for 18/19 mm thick block board (MDF) , top covered with 1mm thick aluminium sheet, duly plastic laminated the Table Dinning top of size 900 mm x 900 mm x 760 mm with 3mm thick PVC edging all round the top including taking out the old unserviceable broken top of size and design shown in drawings , complete as specified and directed. |
| 51 | M&L for Painting of conduit pipe frame with one coat of synthetic enamel paint including preparation of surface before fixing the top complete all as specified and directed |
| 52 | M&L for Welding of broken legs and stiffener with gas welding as per Drg in table, complete as directed. |
| 53 | CHAIR SCHOOL BOARD :- (FD/E6/MAP/05) |
| 54 | Replacement of pvc seat complete all as specified and directed. |
| 55 | Replacement of written hand board complete all as specified and directed. |
| 56 | LOCKER BED SIDE STEEL :-(FD-1029) |
| 57 | M&l for preparing the old treated steel surface of locker, removing of old chipped off surfaces and preparing the surface with putty and making it suitable for painting to match the existing surface and applying with spray/brush painting with one finish coat of synthetic smoke gray/OG colour externally in locker steel all as specified and directed/approved. |
| 58 | Replacement of unserviceable hinges of door shutters of locker steel size as per existing hinge all as per drg and as directed. |
| 59 | Replacement of unserviceable Hasp heavy duty lock staple with screw complete all as directed . |
| 60 | CHAIR EXECUTIVE :- (TRADE PATTERN) |
| 61 | Replacement of unserviceable wheel of chair of approved quality complete all as specified and directed. |
| 62 | Replacement of unserviceable handles/Arms of chair of approved quality complete all as specified and directed. |
| 63 | Replacement of unserviceable tapestry cloth of best quality (Tapestry not less than Rs 150 per metre to be used ) complete all as specified and directed . |
| 64 | Replacement of unserviceable ball bearing of approved quality complete all as directed |
| 65 | Replacement of broken legs with frames complete all as specified and directed. |
| 66 | M&L for removing old seat of chair executive and replacing the same with new seat made from leatherite rexine cloth, best quality as per the sample approved including U foam cushion of 3\\" thick 32 density as approved by GE, complete all as specified and directed |
| 67 | M&L for removing old back of chair executive and replacing the same with new back made out from leatherite rexine cloth, best quality as per the sample approved including U foam cushion of 2\\" thick 32 density as approved by GE, complete all as specified and directed |
| 68 | CHARPOY GI PLYWOOD TOP/ MS TUBING:- (FD-220 &FD/MAP//11/01) |
| 69 | Replacement of unserviceable stiffner with new stiffner made out of flat iron 40 x 5 mm thick (Approx 1 mtr length) parallels to short rail at equal distance and fix to long rail with nut and bolts not less than 8 mm dia including drilling holes and applyingone coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed . |
| 70 | Replacement of unserviceable plywood top with new plywood top 12 mm thick, 7 ply , BWR grade type BB with beading all round approx size 2.00 m x 1.00 m for charpoy GI pipe fixed with min four nos flat headed nut and bolts not less than 6 mm dia fixed with stiffener including drilling holes, complete all as specified and directed by Engr-in-charge. (make: National/Natural /Assam ply and equivalent ISI) as approved by GE |
| 71 | Replacement of unserviceable Check Nut not less than 32 mm dia complete all as specified and directed. |
| 72 | Replacement of unserviceable GI Elbow not less than 32 mm dia complete all as specified and directed. |
| 73 | Replacement of Long Rail 6 feet long GI pipe not less than 32 mm dia complete all as specified and directed |
| 74 | Replacement of Short Rail 3 feet long GI pipe not less than 32 mm dia complete all as specified and directed |
| 75 | CHARPOY GI PIPE NYLON NIWAR:- (FD-220) |
| 76 | M&L for Re-caning of charpoy GI pipe nylon niwar with 4mm wide white colour plastic cane of Shah Brand/Premier as per drawing removing the old unserviceable Niwar all as specified and directed . |
| 77 | RACK SHOE STOOL:- (FD/E6/MAP/02(R): Rpair/ Replaceent of Five shelves of rack shall be 20mm MS pipe welding to legs the shelves shall be 3mm dia Ms rod 9 Nos with powder coated oven baked black colour all as specified and directed. |
| 78 | TABLE 3' X 2' STEEL WITH/W/O DRAWER:- (FD-1008) |
| 79 | M&L for removing of old worn out top of Table 3'x2' steel with/w/o drawer and fixing the new top made of 18/19mm thick block board with 1mm thick teak face plastic laminated sheet and PVC beading all around the top fixed (size 3'x2') complete as directed. |
| 80 | Repiar / Replacement of unserviceable drawers & Lock for drawer/shuuter with duplicate keys all as specified and directed. |
| 81 | M&L for Applying one coat of OG synthetic enamel paint on complete frame before fixing the top including preparation of surfaces complete all as specified and directed. |
| 82 | M&L for Welding of broken legs and stiffener with gas welding as per Drg in table, complete as directed |
| 83 | BED HARD STEEL:- (FD/E6/MAP/08) |
| 84 | Rerpair/Replacement of head rest 18 mm particle board of size 500mm x 400mm one side teak face scrwed to ms strip arc welded to 18mm rectengular and fixed with Main Body frame of Bed complete as directed. |
| 85 | Rerpair/Replacement of Foot rest 18 mm particle board of size 900mm x 400mm one side teak face scrwed to ms strip arc welded to 18mm rectengular and fixed with Main Body frame of Bed complete as directed. |
| 86 | Replacement of unserviceable plywood top with new plywood top 12 mm thick, 7 ply , BWR grade type BB with beading all round approx size 2.00 m x 1.00 m for Bed hard steel fixed with min four nos MS Sq pipe headed nut and bolts not less than 6 mm dia fixed with stiffener including drilling holes, complete all as specified and directed. |
| 87 | M&Lfor Preparing the old treated steel surface of Steel bed removing of old chipped off surfaces and preparing the surface with putty and making it suitable for painting to match the existing surface and applying with spray/brush painting with one finish coat of synthetic smoke Black colour all as specified and directed/approved. |
| 88 | Misc repair / maintence door to door of old tables, chair, beds, partitions and easing of chairs and beds and all defective items such as knobs, handles, all type of locks and other hardware fitting and fixture, as per site requirement with and including material like screws, nails, wahers, grease and all kind of machine work i.e welding, cutting, bending, drilling & grinding.NOTE:-The work under the subject tender is to attend day to day complaints of occupant/users. Complaints shall be completed under 24 hrs. Contractor should have all categories of workmen to attend the same within stipulated time as directed by Engineer-in-charge. If any complaint is not attended within 6 (six) Hours from time of complaint given to contractor penalty of rupees 100/ for each complaint shall be made for not attending the complaint in time. Contactor with mobile number and Mail id or his rep shall liaisons with BSO office every day at 9.00 AM & 2.00 PM i.e two times every day in office of BSO to know or collect the day to day work/complaints. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender