Tender For Repair / Replacement Of External Water Supply Gi Tubing, Valves, Cleaning Of Ug Sumps, Oh Tank, Etc And Other Misc E/M Works And Provn Of 02 (Two) X Ro Plant & 02 X (Two) Refrigerators At Tech Bldg At Diber Fd Station Auli (Joshimath)
Tender Value
8.99 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
12 days left
EMD
45000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamoli → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement Of External Water Supply Gi Tubing, Valves, Cleaning Of Ug Sumps, Oh Tank, Etc And Other Misc E/M Works And Provn Of 02 (Two) X Ro Plant & 02 X (Two) Refrigerators At Tech Bldg At Diber Fd Station Auli (Joshimath)
BOQ
| Sl. No. | Item Description |
| 1 | Contract Details |
| 2 | Material and Labour for cleaning of underground sump, pumping out all water, taking out dirty water stone pieces and sludge etc by usnig buckets / motor, cleaning and removing all dirt and plant fungee completely from wall and floor of the tank and from mouths of inlet and outlet pipes etc and by rubbing with wire brushes and removing all waste to distance not exc 50 mtr and depositing where directed cleaning the tank inner surface with suitable cleaning agent (bleaching powder) and fresh water and removing dirty water out of the tank complete with painting with two coat of black bituminous paint on all the steel /iron surface of tank , writing date of cleaning on external surface of wall with synthetic enamel paint after removing old date complete all as specified and directed. |
| 3 | Material and labour for welding work for cutting/joining existing delivery/suction steel tubing for alterations or additions or to make the supply line leak proof etc of size 50mm to 100 mm bore and welding to broken LT panel board door, hinges etc complete all as specified and directed.Note : (i) Rate of hiring of welder, welding machine and welding rod etc included in item rate. (ii) Complete welding work in one lenth of pipe line/ complete welding work in one panel board shall be one job. |
| 4 | Taking up or down existing GI steel water tubing of any grade including all fittings and accessories from trenches/open surfaces,tanks including cleaning ,re-threading the old threads, cutting, welding work, etc and re-fixing the same after necessary repair works, etc as required to make the joints and line leak proof , including replacement of GI fittings and accessories like flange/socket/union /reducer as required in new or old position including necessary excavation work complete all as specified and directed of size (a) 100/150mm bore (Nominal bore) |
| 5 | All as per item no 4 above but for 50mm bore (Nominal bore) |
| 6 | All as per item no 4 above but for 25mm bore (Nominal bore) |
| 7 | All as per item no 4 above but for 15mm bore (Nominal bore) |
| 8 | Supply, fixing, laying & testing for galvanised steel (Gl) tubing of 25mm dia medium grade with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, checknuts, caps, sockets,plugs and unions, etc.) laid in trenchs or in open surfaces, connecting in new or old position or where required incl taking out old tubing complete all as specified and directed for the following bore of pipes. |
| 9 | All as per item No 08 above but of size 15 mm dia |
| 10 | All as per item No 08 above but of size 20 mm dia |
| 11 | All as per item No 08 above but of size 50 mm dia |
| 12 | All as per item No 08 above but of size 100 mm dia |
| 13 | M&L for cutting existing steel tubing for alterations or additions of GI pipe of size 25 to 50 mm dia complete all as specified and directed. |
| 14 | Excavation in trenches n.exc. 1.5m wide and n.exc1.5m depth for foudation, trenches for laying of cables/pipe line etc. and getting out in hard/dense soil. |
| 15 | Returning, filling in, incl. spreading, levelling, watering and well ramming in layers not exc 25 cm in type of soil. |
| 16 | Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point. |
| 17 | Supply and mix bleaching powder complete all as directed. |
| 18 | Material and Labour for cutting of road not exceeding 50 cm wide and 100 cm depth for repair of pipe line and making good the disturbed road with PCC 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified and directed.. |
| 19 | M&L for taking out old unserviceable stop/gate valves and supply & fixing stop/gate valve gun metal screwed down high pressure with clutch or butterfly handle screwed both ends for iron pipe or for union of size 50 mm with all fittings (such as bends, tees, short pieces, connectors, checknuts, caps, plugs and unions, etc.) laid intrenchs, connecting in new or old position, complete all as specified and directed. |
| 20 | M&L for taking out old unserviceable stop/gate valves and supply & fixing stop/gate valve gun metal screwed down high pressure with clutch or butterfly handle screwed both ends for iron pipe or for union of size 25 mm with all fittings (such as bends, tees, short pieces, connectors, checknuts, caps, plugs and unions, etc.) laid intrenchs, connecting in new or old position, complete all as specified and directed. |
| 21 | M&L for taking out old unserviceable stop/gate valves and supply & fixing stop/gate valve gun metal screwed down high pressure with clutch or butterfly handle screwed both ends for iron pipe or for union of size 20 mm with all fittings (such as bends, tees, short pieces, connectors, checknuts, caps, plugs and unions, etc.) laid intrenchs, connecting in new or old position, complete all as specified and directed. |
| 22 | M&L for taking out old unserviceable stop/gate valves and supply & fixing stop/gate valve gun metal screwed down high pressure with clutch or butterfly handle screwed both ends for iron pipe or for union of size 15 mm with all fittings (such as bends, tees, short pieces, connectors, checknuts, caps, plugs and unions, etc.) laid intrenchs, connecting in new or old position, complete all as specified and directed. |
| 23 | Cleaning of valve pit chamber of any size by taking out mud and muddy water, all sand/mud/Algae deposits, & making it free from algae growth by scrapping with brush,and depositing the same at a distance not exceeding 20 meter away from pit including swiping free from any type of dirt including rectification the leakage of valve of any size by using gland of appropriate size and required packing materials as directed at site. |
| 24 | M & L for cleaning of pumphouse and its surrounding by cutting bushes and surface dressing by grubbing up tree trunk , shrubs, grass, and bushes protruding over ground, digging out roots, filling holes with mud and leveling off ground and removing of waste material to a distance n exc. 50 m and clearing site near all water supply installations or as directed by Engr-in charge |
| 25 | Demolition of existing unserviceable masonry valve pit including all accessories like angle iron frame, door fixed with MS sheet cover etc amd M & L for construction of brick masonery valve pit of size 900x900x900mm (internal dimensions) with brick work of sub class 'B' old size bricks built in cement morter 1:4 and 10mm thick rendering on internal and exposed external surface and including 40x40x6mm mild steel angle frame 3.15mm thick mild steel sheet cover in two Nos shuitters with handle and locking arrangement and 1 Nos 50mm size 4 levers lock with key in duplicate make Navtal including painting steel and iron surfaces with two coats of black bituminous paint over a coat of red oxide primer complete all as specified, shown on drawing and as directed. |
| 26 | Supply and fixing in repairs voltmeter 0-500 Volts square type flush mounted as per existing size all as specified and directed. |
| 27 | Supply and fixing in repairs Ammeter 0-100 Amps square type flush mounted as per existing size all as specified and directed. |
| 28 | M&L for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised strip 32x6mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 40mm dia light grade up to 7.5mtr from electrode to testpoint/DB and GI pipe 15mm watering pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead & GI pipe beyond 7.5 mtr from electrode to earth terminal point/main switch shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost. |
| 29 | M&L for earthing complete with galvanised steel, earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in in electrical plate No 5 on page 19-49 of MES schedule 1991 Part I connected to main switch board /main DBs/ earthing test point Including all necessary excavation and earth work in hard/ dense soil common salt and charcoal dust mixed and packed 150 mm thick all-round the GI earth plate, watering pipe 20 mm dia G I medium grade . GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150C/C both ways and pit/ chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 25mm dia light grade up to 7.5m from electrode to testpoint/DB and GI pipe 15mm watering pipe to be fixed complete all as specified ,indicated on electrical plate No 5 and as directed incl testing on completion.Note :- (i) Earth lead & GI pipe beyond 7.5 mtr from electrode to earth terminal point/main switch shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost. |
| 30 | Supply & Fixing LED Flood light fitting 120 W 230 V AC outdoor type pressure die cast aluminium IP66 luminaire with high power LED as light source and electronic driver with impact and corrosion resisant including clamp and GI bracket light grade and provn of electric supply to fitting from source by means of PVC Sheathed multi-stranded aluminium conductor cable of 3 x 2.5 sqmm core complete all as specified and directed . Make Havells, Bajaj, Crompton |
| 31 | Supply and Fixing in replacement pressure pump of 1 HP, single phse, 230 volt, 50 hz, 2800 rpm, head 25 mtr discharge 30lpm, size 25x25 mm with pressure tank as per manufacture instruction complete all as specified and directed. Make ; kirloskar, cromptonGreaves, KSB. |
| 32 | M&L for notice board of size 50x20 cm and written as \\"NO ENTRY\\", made from 1.6mm thick mild steel sheet, vitreous enameled white, with letters, figures and conentional skull and bones in signal red colour and fixed with MS clamps, bolt and nuts of approved size complete all as specified and directed. |
| 33 | M&L for notice board of size 50x20 cm and written as \\"OUT OF BOUND FOR ALL RANKS\\", made from 1.6mm thick mild steel sheet, vitreous enameled white, with letters, figures in signal red colour and fixed with MS clamps, bolt and nuts of approved size complete all as specified and directed. |
| 34 | Material and labour for chart/ poster/layout plan / name plate etc made out of perpex sheet 2 mm thick, of size 2 m x 1.5 m cut to size and shape with colour background and diagram and letters including fixing arrangement with screws / adhesives as required complete all as specified and directed by Engineer in charge.Note: The content and size of chart/ poster /diagram / name plate etc shall be given by the Engr in charge during execution of work. |
| 35 | Supply in replacement water testing kit free chlorine & PH test with coloured ample with all testing fitments and OT solution packed in Rexene finished wooded box complete as directed and as approved by Engnr-in-Charge. |
| 36 | Supply in replacement digital water TDS testing kit complete as directed and as approved by Engnr-in-Charge. |
| 37 | Supply and fixing nuts, bolts and washer for pumping set 5/7.5/15 HP size as per sample complete all as specified and directed |
| 38 | S & F MCCB 415 Volts, 4 pole, 16 KA, 125 Ampere complete all as specified and directed |
| 39 | S & F MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA complete all as specified and directed |
| 40 | Taking out old U/S service connection cable for replacement including S&F service connection cable, 1100 volts grade heavy duty PVC insulated aluminium conductor, 16 Sqmm 2 core size, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 41 | Taking out old U/S service connection cable for replacement including S&F service connection cable, 1100 volts grade heavy duty PVC insulated aluminium conductor, 16 Sqmm 2 core size, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender