Tender For Deposit-Firefighting-Vazhoor Press-Installation Of Firefighting Arrangements In Govt Press,Vazhoor,Kottayam-Electrical Fire Fighting Work
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Jul 2026
6 days left
EMD
14728
Bank guarantee accepted
Document Fee
1300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kottayam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Deposit-Firefighting-Vazhoor Press-Installation Of Firefighting Arrangements In Govt Press,Vazhoor,Kottayam-Electrical Fire Fighting Work
BOQ
| Sl. No. | Item Description |
| 1 | Fire fighting works |
| 2 | OD53170/2025-2026:Supplying, installation, testing and commissioning of electric driven terrace pumpsuitable for automatic operation and consisting of following, complete in all respects,as required: (Terrace Pump)a.Horizontal type, multistage, centrifugal, split casing pump of cast iron body &bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520b. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure,horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.c. M.S.fabricated common base plate, coupling, coupling guard, foundation boltsetc.as required.d. Suitable cement concrete foundation duly plastered and with anti vibration pads.450 lpm at 35 m Head |
| 3 | OD53172/2025-2026:Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 100mm Dia |
| 4 | OD53200/2025-2026:Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 80mm Dia |
| 5 | OD53225/2025-2026:Supplying, installing, testing and commissioning CI Butterfly valve slim seal standard lever operated, wafer type, SG iron coated with nylon Disk, SS shaft, Nitrile Body lining . PN 16 rating. Design as per BS 51 confirming IS 13039 with required flanges nuts, bolts. 100mm dia |
| 6 | OD53244/2025-2026:Providing & fixing of pressure switch in M.S. pipe line including connection etc. asrequired |
| 7 | 16.8:Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required |
| 8 | OD53284/2025-2026:Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conformingto IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Gunmetal |
| 9 | OD53286/2025-2026:Hose cabinet:- Supply and fixing of weather proof Hose cabinet having the size of 750 x 500 x 250mmmade of 16 gauge M.S sheet with PCC supports and full front glass door and locking arrangementssuitable to accommodate 2 Nos 15m long hose pipes and 1 No. branch pipe. The cabinet shall bepainted to scarlet red colour Double |
| 10 | OD53382/2025-2026:Supplying and fixing first-aid Hose Reel with MS construction spray painted in postoffice red, conforming to IS 884 complete with the following as required.a.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 asper IS: 12585 b.20 mm nominal internal dia gun metal globe valve & nozzle.c.Drum and brackets for fixing the equipmets on wall.d.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe andsocket.30 m |
| 11 | OD53287/2025-2026:Supply, installation, testing and commissioning of Re-inforced rubber lined hose conformingto IS: 636, 63mm dia. with ISI mark 15m long and fitted with instantaneous type couplings on both ends,made of Gun metal. (Firex / Newage / CRC / Zenith) |
| 12 | 17.1.4:FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. |
| 13 | OD53076/2025-2026:Supply, installation, testing and commissioning of C.I. slim seal type ball valve with required flanges, nuts and bolts gasket etc. complete 25mm dia |
| 14 | OD53378/2025-2026:Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominalinternal diameter size nozzle conforming to IS 903 suitable for instantaneousconnection to interconnect hose pipe coupling as required :Stainless Steel (Grade 304) |
| 15 | 17.1.6:FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. |
| 16 | 17.1.9.2:Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.6 Zone |
| 17 | 17.5.2:CABLING & WIRINGSupplying & laying of 2x1.5 sq mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. |
| 18 | OD53074/2025-2026:Supply, erection, testing and commissioning of Public Addressing cum Talk back panel 6 zone Selector control with controller , power supply including call selector, suitable Amplifier Unit 5 mic input. |
| 19 | 17.1.3:FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning of manual call boxes of MS Construction in surface/recess with stainless steel chain & hammer assembly Complete with glass and push button etc. as required. |
| 20 | 17.3.2:PUBLIC ADDRESS SYSTEMSupplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required. |
| 21 | OD53069/2025-2026:Supply, installation, testing and commissioning of Gun metal Air Release valve 25mm dia |
| 22 | OD53075/2025-2026:Suply and providing emergency fire escape lighting system consisting 2 nos lamp ,7 AH MF battery charging unit ,exit sign display etc in MS enclosure |
| 23 | OD53424/2025-2026:Supply & erection of Fire Escape rout in each floor having size 12\\" x 16\\" made of3mm thick acrylic sheet with glass frame |
| 24 | OD53425/2025-2026:Supply & erection of Glow Sign Boardmade of 3mm thick PVC foam board for eachfloor 12\\" x 4\\" (appropriate places) |
| 25 | 90.14.28.2:S & F Motor starters of the following ratingsThree phase DOL starters for 0.25HP to 7.5 HP motor |
| 26 | OD53434/2025-2026:Supply and providing 5 Kg. Dry Chemical Powder type Fire Extinguisher with hose andclamps including fixing it to wall as required. |
| 27 | 90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) |
| 28 | 90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. |
| 29 | 90.14.3.3:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardSupply and providing 'U' section PVC beeding in the panel board |
| 30 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board |
| 31 | 2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N |
| 32 | 90.12.41.34:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp |
| 33 | 90.6.6.4:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.6 sq mm |
| 34 | 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 35 | 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 36 | OD53543/2025-2026:Supply and providing 25x3mm brass bolt |
| 37 | 9.1.33:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) |
| 38 | OD53078/2025-2026:Charges for preparation of Electrical/fire Drawing per A3 sheet first copy. |
| 39 | OD53077/2025-2026:Copying charges of Electrical/fire Drawing per A3 sheet additional copies Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender