Tender For Construction Of 08 Nos. Air Crossing For G-Iii Bottom Seam At Bagdewa Ug Mine.
Tender Value
63.15 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
11 days left
EMD
79000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Korba → Chhattisgarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 08 Nos. Air Crossing For G-Iii Bottom Seam At Bagdewa Ug Mine.
BOQ
| Sl. No. | Item Description |
| 1 | Groove cutting in roof/ floor (Hard Stone) for Stopping & Manhole by using chisel & hammer and removal of excavated cuttings up to a distance of 30m. Materials (i.e. hand shovel, hammer etc.) will be provided by the colliery management. (for underground) |
| 2 | Groove cutting in roof/ floor (Coal) for Stopping & Manhole by using chisel & hammer and removal of excavated cuttings up to a distance of 30m. Materials (i.e. hand shovel, hammer etc.) will be provided by the colliery management. (for underground) |
| 3 | Loading of material (Cement) into tub on surface within a lead of 50m. |
| 4 | Loading of material (Sand) into tub on surface within a lead of 50m. |
| 5 | Loading of material (Stone aggregate below 40mm nominal size) into tub on surface within a lead of 50m. |
| 6 | Loading of material (Steel) into tub on surface within a lead of 50m. |
| 7 | Loading of material (Bricks) into tub on surface within a lead of 50m. |
| 8 | Unloading of material (Cement) at destination in U/G within a lead of 50m. (For each additional lead of 50 m subject to 0.50 Km maximum, there will 14.67% increase in rate) |
| 9 | Unloading of material (Sand) at destination in U/G within a lead of 50m. (For each additional lead of 50 m subject to 0.50 Km maximum, there will 14.67% increase in rate) |
| 10 | Unloading of material (Stone aggregate below 40mm nominal size) at destination in U/G within a lead of 50m. (For each additional lead of 50 m subject to 0.50 Km maximum, there will 14.67% increase in rate) |
| 11 | Unloading of material (Steel) at destination in U/G within a lead of 50m. (For each additional lead of 50 m subject to 0.50 Km maximum, there will 14.67% increase in rate) |
| 12 | Unloading of material (Bricks) at destination in U/G within a lead of 50m. (For each additional lead of 50 m subject to 0.50 Km maximum, there will 14.67% increase in rate) |
| 13 | Brick work with flyash F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) DSR Item 6.1.2 |
| 14 | Brick workwith flyash F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor five level in : Cement mortar 1:6 (1 cement : 6 coarse sand) DSR Item 6.32.2 |
| 15 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). DSR Item 5.3.1 |
| 16 | 12 mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand). DSR Item no. 13.4.2 |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform. DSR Item no. 5.9.3 |
| 18 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level for Cold twisted bars. DSR Item no. 5.22.3 |
| 19 | Drilling/Blasting in roof and removal of excavated manullay and disposal upto 30m lead in UG (i) drilling by hand. |
| 20 | Roof bolting (1.5m Length, 29mm dia) by machenical drilling of holes, jamming tightening the roof bolts with bearing plates /w- straps including carriage of material from nearest district store to working faces within a lead of 500 m. (i). Material Like drill Rod , Drill bit will be provided by the department.(ii). Material like mechanical drill machine /UDM , drill cable , etc. will be provided by the colliery management. (iii). Arrangement of water & power will be provided by the management . (for underground). |
| 21 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender