Tender For . Construction Of Ladies Toilet And Other Works For A.E. (Tlm) Sub Division At Bhopal, Harda, Itarsi, Sarni, Sehore, Shujalpur And Vidisha.
Tender Value
16 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
10 days left
EMD
32000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for . Construction Of Ladies Toilet And Other Works For A.E. (Tlm) Sub Division At Bhopal, Harda, Itarsi, Sarni, Sehore, Shujalpur And Vidisha.
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. All kinds of soil. (M2 : 100 sqm) |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil |
| 3 | Providing and laying in position cement concrete of With 40mm nominal size graded stone aggregate. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate |
| 4 | Providing and laying in position specified grade of reinforced cement concrete :..M-20 Grade Concrete |
| 5 | Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) …..M-20 Grade Concrete |
| 6 | Reinforcement for R.C.C. work including straightening, ..TMT BARS |
| 7 | Centering and shuttering in cluding strutting, propping etc. and removal of form for:..Foundations, footings, bases of columns, etc. for concrete upto plinth level |
| 8 | Centering and shuttering in cluding strutting, propping etc. and removal of form for:... etc...Uptoplinthlevel |
| 9 | Centering and shuttering in cluding strutting, propping etc. and removal of form for:..Lintels, beams, girders, bressumers and cantilevers |
| 10 | Centering and shuttering in cluding strutting, propping etc. and removal of form for:..Columns, P i l l a rs , Piers, Abutments, Posts and Struts. |
| 11 | Centering and shuttering in cluding strutting, propping etc. and removal of form for:..Suspended floors, roofs, landings, balconies and access platform.. |
| 12 | Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in :..Having 75 kg / cm2 average compressive strength...Cement mortar 1:6 (1 cement : 6 sand).. |
| 13 | 12 mm cement plaster of mix :..1:4 (1 cement : 4 sand) |
| 14 | 20 mm cement plaster of mix :..1:6 (1 cement : 6 sand) |
| 15 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) |
| 16 | Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 17 | Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 18 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I)non.decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters..30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.. |
| 19 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required...In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. |
| 20 | Providing and fixing chromium plated brass door latch ISI marked with necessary screws etc complete..250x16x5mm |
| 21 | Providing and fixing chromium plated brass tower bolts ISI marked with nuts and screws etc complete...200x10 mm |
| 22 | Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings:..Size 450x300x150 mm. |
| 23 | Providing and laying cement concrete 1:3:6 :..110 mm diameter PVC. Pipe |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, ..15 mm nominal outer dia .Pipes… |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, ..25 mm nominal outer dia .Pipes.. |
| 26 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, .External Work..32 mm nominal outer dia .Pipes.. |
| 27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, ..40 mm nominal outer dia .Pipes. |
| 28 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :..With C.I. wheel of approved quality (screwed end)..25 mm nominal bore |
| 29 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 30 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :..Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore...86 mm long weighing not less than 88 gm |
| 31 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. |
| 32 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour...450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. |
| 33 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing...Rectangular shape 453x357mm |
| 34 | Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion...Coupler..110 mm |
| 35 | Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design... |
| 36 | Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification...100 mm dia. |
| 37 | Providing and fixing toilet paper holder:..C.P. brass |
| 38 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore |
| 39 | Providing and fixing in position best Indian Health Faucet with 8mm dia 1.2 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall). |
| 40 | Providing and fixing C.P. brass two way bib cock with wall flange of approved quality conforming to IS standards, 15 mm nominal bore |
| 41 | Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. and weighing not less than 650gm, 15 mm nominal bore 125 mm long foam flow. |
| 42 | Providing and fixing UPVC trap ofself cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet |
| 43 | Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete...With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) |
| 44 | Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongationof 150% and water proofing of upto 3 bars on vertical surface |
| 45 | Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2..Cement Mortar 1:6 (1 cement: 6 sand). |
| 46 | Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size |
| 47 | Providing and laying in position cement concrete of With 20mm nominal size graded stone aggregate. M-15 – Grade concrete |
| 48 | Centering and shuttering including strutting, propping etc. and removal of form work for : Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. |
| 49 | Transportation By Mechanical Transport including loading, unloading and stacking. Excavated rock 1 Km. |
| 50 | 12 mm cement plaster finished with afloating coat of neat cement of mix :1:3 (1 cement : 3 sand) |
| 51 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stoneaggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design..Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be notless than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :..With well burnt bricks. |
| 52 | Supplying, erecting and testing of approved make exhaust fan heavy duty with mounting frame, blades AC 230-250 complete connection and including, frame bolt/anchor hole fasteners etc. complete finished and as required...380mm sweep RPM 900 /1400 |
| 53 | Supply and fixing in position LED lamp of approved make..9 Watt250Volt |
| 54 | Point wiring (excluding metallic switch box &sheet but including switches, sockets, lamp.holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi.strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of.suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of.green colour inside conduit, screwless connector for joints etc. as required as per.specification for :-..Light point/fan points..Primary short point.Using flush type normal accessories |
| 55 | Point wiring (excluding metallic switch box &sheet but including switches, sockets, lamp.holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi.strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of.suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of.green colour inside conduit, screwless connector for joints etc. as required as per.specification for :-..Light point/fan points..Primary medium point.Using flush type normal accessories |
| 56 | Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) of ISI marked suitable size etc. as required as per specification.2x2.5 Sq.mm. ..Using flush type normal accessories Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender