Tender For Deposit-Aruvappulam Grama Panchayat-Thoppil Laksham Veedu Water Supply Scheme- Ward 14-Phase-2- Oh Tank, Pump Set, Pumping Lines, Distribution Lines & Fhtcs-General Civil Work
Tender Value
31.22 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathanamthitta → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Deposit-Aruvappulam Grama Panchayat-Thoppil Laksham Veedu Water Supply Scheme- Ward 14-Phase-2- Oh Tank, Pump Set, Pumping Lines, Distribution Lines & Fhtcs-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | DESIGN CHARGES |
| 2 | OD73357/2026-2027:Conducting Soil Test and Submitting Soil Test Report from Govt Engineering College.- 1% of cost of OHSR |
| 3 | OD73356/2026-2027:Designing, submitting drawing of OHSR & taking approval from WASCON including all costs, as per the direction of deparmental officers. - 1% of Cost of OHSR. |
| 4 | Pumpsets |
| 5 | OD234457/2024-2025:1. PumpSupply, erection, testing, and commissioning of KWA pre-qualified reputed make submersible pump and motor set of suitable capacity to deliver a discharge of 5 LPS against a total head of 40 Mtr, conforming to IS 8034/2021 (latest revision) for submersible pumps. The pump shall have bronze or stainless steel impellers, SS shaft, and CI/SS casing, with all components adequately protected against corrosion and suitable for continuous operation under the specified head and discharge. The pump and motor shall be directly coupled, designed for submerged installation, and suitable for operation on three-phase, 50 Hz, 415 V AC supply. The supply shall include all accessories required for the complete installation of the submersible unit such as delivery head assembly, delivery bends, base clamp, lifting arrangement, cable guard, non-return valve, sluice valve, and strainer as applicable.2. MotorSupply, erection, testing, and commissioning of KWA pre-qualified reputed make submersible motor, suitable for driving the above pump set. The motor shall be water-lubricated, rewindable type, with stainless steel shaft and CI or SS housing, suitable for the rated head and discharge, and for operation on 3 phases, 415 V, 50 Hz AC supply. The motor shall conform to IS 9283 (latest revision) and shall include all necessary accessories such as submersible cable up to the control panel and cable jointing materials.3. StarterStarter Supply, erection, testing, and commissioning of a suitably rated, fully automatic star delta starter with air brake contactor. The starter shall be suitable for the above motor and shall include Over-voltage and under-voltage protection, Single-phase preventer, Overload protection, Phase unbalance protection, Motor protection relay all protections shall conform to IE rules and standard codes of practice. 4. Control Panel BoardSupply, erection, testing, and commissioning of a cubical-type, wall-mounted, MS fabricated, dust- and vermin-proof control panel. The panel shall include: 1 No. 100A, 35kA MCCB (Incomer) , 2 Nos. 63A, 35kA MCCBs (Outgoing), Appropriately sized aluminum bus bars for interconnection, 3 Nos. indicator lamps, 1 No. voltmeter with selector switch, 1 No. ammeter with selector switch The panel shall be equipped with a common earthling bus connected to all MCCBs in compliance with IE standards. It shall be mounted on a common base frame on a suitable foundation. 5. Cabling WorkSupply, laying, testing, and commissioning of suitable size copper cables from the control panel to the starter and from the starter to the motor, considering energy efficiency and system load requirements. 6. Earthing Supply of all materials and provision of double earthing for the motor, starter, and panel board. Earthing shall be done using suitable pipe/plate-type earthing and GI/copper strips buried in the ground, strictly conforming to IE standards. 7. Capacitor Supply, erection, testing, and commissioning of an ultra-heavy-duty APP capacitor for power factor correction. The capacitor shall ensure a power factor above 0.95 and comply with IS 2834 standards. 8. Valves Supply of high-quality, heavy-duty, ISI-marked PN 1.6 CI double-flanged sluice and non-return valves of suitable size. Installation shall include RCC support, especially for the non-return valves. 9. Pressure Gauge Supply and installation of a suitable pressure gauge with control valve. 10. Suction and Delivery Pipe Connections Supply and fitting of suitable size, high-quality GI/MS pipe with a shell thickness of not less than 8 mm for a total length of 15 meters. The pipe shall be compatible with the pump set and include all necessary flanges, nuts, bolts, IR sheets, etc., for proper connection to both suction and delivery sides Scope includes, Connection of suction pipe and valves, Delivery pipe with valves and specials for connection to the pumping main, Civil works including of Foundation with bolts in CC 1:1.5:3 using 20 mm metal, Plastering, Provision of cement and steel. All incidental works for satisfactory completion 11. Documentation and Power Allocation Preparation of all necessary documents and submission to KSEB through a licensed electrician for obtaining power allocation to operate the pump sets. This includes all expenses related to document preparation and submission, excluding KSEB's power allocation charges. 12. Erection and Trial Run Erection of the motor and pump with MS base plates and copper strips, as per relevant IS standards and IE rules. The system shall be commissioned with a trial run ensuring no interruption to the existing pumping arrangements. 13. Warranty A comprehensive warranty of five (5) years shall be provided for the pump set, motor, and associated components. \\"Although the initial design has been prepared by this office, the contractor is advised to review and, if necessary, redesign the system and obtain approval from the competent authorities before execution.\\" |
| 6 | OH Tank - 15000 litre |
| 7 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 8 | 2.26.1:Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil |
| 9 | 2.9.1:Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock |
| 10 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns |
| 11 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 12 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 13 | 5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 14 | 5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform |
| 15 | 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers |
| 16 | 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts |
| 17 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 18 | OD74526/2026-2027:Providing and fixing 80 mm Dia Puddle pipe (Wallcast Pipe), including cost of all materials, labours, and other incidental charges etc... complete. |
| 19 | 5.33.1.1:Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cementAll work upto plinth levelConcrete of M25 grade with minimum cement content of 330 kg /cum |
| 20 | 5.33.2.1:Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cementAll work above plinth level upto floor V levelConcrete of M25 grade with minimum cement content of 330 kg /cum |
| 21 | 5.35:Add for using extra cement in the items of design mix over and above the specified cement content therein |
| 22 | 100.41.34:Supplying and fixing Rectangular C.I. manhole cover 455mm x 610mm with frame (low duty) charges including all cost, labour charges etc., complete. |
| 23 | 13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) |
| 24 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 25 | 100.36.1:Filling water with 5000 litre tankers fited in lorry and conveying water from a distance of 5 km (average) to the reservoir site and pumping the water into the reservoir of height not less than 3 m using 5 HP diesel engine pump set , hire for tanker lorry, tools and other appliences and cost of water etc. complete. |
| 26 | 13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm |
| 27 | 10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 28 | OD243963/2024-2025: Supplying and fixing Board type mechanical water level indicator Float guided by anchor plate at<br>bottom and spring assembly at top of tank 6" wide Aluminum/MS Powder coated scale in black color with white<br>stickers having 10 mm wide graduation, minor marking at every 100 mm in white figures , major markings at 500 mm<br>in white stickers Nylon pulleys with weatherproof Pulley housings Guide wire spring assembly with SS Guide wires ,<br>MS Powder coated Indicator (Red) Assembly etc complete as per direction of dept officers based on site<br>requirement.<br> |
| 29 | 18.17.4:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore |
| 30 | Pumping lines & Distribution lines |
| 31 | 15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 32 | 18.12.6:Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work50 mm dia nominal bore |
| 33 | OD73537/2026-2027:Cutting, Grinding and Welding 50 mm (I.D.) G.I/ S.S/ M.S. pipes for making bends and other specials by gas cutting . Grinding the cut edges / welded portions in M.S. sheet, pipe and specials by grinding machine. Welding pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 3.60 mm to 8 mm thick M.S. plates. |
| 34 | OD54908/2026-2027:Providing and fixing of 50 mm MS Flange, including cost of conveyance, labour, and other incidental charges etc... complete. |
| 35 | 18.13.2:Making connection of G.I. distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete:50 to 80 mm nominal bore |
| 36 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 37 | 100.32.4:Conveying and fixing C. I. Double Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 80mm Double Acting Air Valve. |
| 38 | 18.17.4:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender