Tender For Supply Installation And Electrification Of Air Conditioners In The Dj And Adj Court Rooms And Chambers In District Court Muzaffarnagar.
Tender Value
38.73 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
6 days left
EMD
3.90 Lakhs
Bank guarantee accepted
Document Fee
854
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saharanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation And Electrification Of Air Conditioners In The Dj And Adj Court Rooms And Chambers In District Court Muzaffarnagar.
BOQ
| Sl. No. | Item Description |
| 1 | Part (A) - Bill of Quantity for A.C. installation work |
| 2 | SITC of Air Cooled Hi wall split type AC Complete with Indoor unit, Outdoor unit, Concealed copper refigerant piping with insulation Inverter type-cooling only 1.5 TR 5 Star BEE Rating. The System Shall be able to operate up to 520 C (Outdoor ambient temperature) |
| 3 | SITC of Air Cooled Hi wall split type AC Complete with Indoor unit, Outdoor unit, Concealed copper refigerant piping with insulation Inverter type-cooling only 2.0 TR 5 Star BEE Rating. The System Shall be able to operate up to 520 C (Outdoor ambient temperature) |
| 4 | SITC of 4KVA capacity Voltage Stabilizer for air conditioner upto 1.5 ton, voltage range 130-300 Volts, copper winding, make Microteck, Livguard, V Guard |
| 5 | SITC of 5KVA capacity Voltage Stabilizer for air conditioner upto 2.0 ton, voltage range 130-300 Volts, copper winding, make Microteck, Livguard, V Guard |
| 6 | Supply and laying of 2.5 sqmm 4 Core round copper cable for indoor unit to outdoor unit |
| 7 | Supply and laying of 2.5 sqmm 3 Core round copper cable for Stabilizer to indoor unit |
| 8 | SITC of Suction/Discharge both copper pipe line in split A.C. Unit 1.5 ton capacity including brazing, nitrile, rubber insulation 6mm thick class 'O' etc complete 1/4\\" (6.40 mm) and 1/2\\" (12.70mm). Suitable for 1.5 TR AC |
| 9 | SITC of Suction/Discharge both copper pipe line in split A.C. Unit 1.8/2.0 ton capacity including brazing, nitrile, rubber insulation 9mm thick class 'O' etc complete 3/8\\" (9.50 mm) and 5/8\\" (15.90 mm). Suitable for 2.0 TR AC |
| 10 | Supply and laying of Heavy Duty PVC Plastic braided 20mm OD flexible pipe for condensed water drain with clipping accessories complete |
| 11 | Supply and Fixing PVC Casing pipe 4x4 inch size. complete in all respect |
| 12 | Supply and Fixing of Outdoor Unit stand for split type A.C. |
| 13 | Supply, Fabrication and Installation of M.S. cage for protection of Outdoor unit from animal/theft L X W X H 1300 mm X 600 mm X 1200 mm complete in all respect |
| 14 | SITC of hydraulic operated, aluminium body, auto door closure. complete in all respect. |
| 15 | S/F of PVC door curtain suitable for 25mm dia SS pipe for maintaining tempreature in AC environment complete in all respect. |
| 16 | S/F of stainless steel 25mm dia curtain pipe above the door frame complete in all respect. |
| 17 | S/F of stainless steel curtain pipe bracket suitable for 25mm dia pipe complete in all respect. |
| 18 | S/F of SS curtain pipe side suitable for 25mm dia pipe. |
| 19 | Part (B) - Bill of Quantity for Electrication work |
| 20 | Wiring for circuit/ submain wiring alongwith earth wire with 2X6 sq. mm + 1 X 6sq. mm wire sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 21 | Supplying and fixing 6 pin 15/16 A socket outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 22 | Supplying and fixing 1 or 2 Module (75mmX75mm) size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. |
| 23 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 24 | S/f 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). |
| 25 | S/f of 8 Way (4+24) ways double door surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 26 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of single poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 27 | Supplying and fixing 63 Amp rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.. |
| 28 | Supplying and fixing 100 Amp rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.. |
| 29 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. |
| 30 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 31 | Supplying and laying of 35 sqmm 3.5 core aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 32 | Supplying and laying of 120 sq mm 3.5 core aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 33 | Supplying and making end termination with brass compression gland and aluminium lugs for 3.5x35 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 34 | Supplying and making end termination with brass compression gland and aluminium lugs for 3.5x120 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender