Tender For Repairs To Certain Steel Furniture Including Painting Under Bso Of Ge (West) Ferozepur Cantt
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Aug 2026
10 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Firozepur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Certain Steel Furniture Including Painting Under Bso Of Ge (West) Ferozepur Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Almirah steel large with shelf/Almirah steel large 1/2H 1/2 shelf (DRG NO. FD-1031/ FD/E6/MAP/18) Dismantle following old defective, worn out, unserviceable, rusted, broken parts of article and removing from site and supply and fix in replacement by the following parts including cutting, welding, turning, bending etc complete all as specified and as shown on drawings and as directed. |
| 2 | Leg made out of 1.00mm thick mild steel/CRCA sheet duly painted with one coat of red oxide primer. |
| 3 | Shelf made out of 1.00mm thick mild steel/CRCA sheet duly painted with one coat of red oxide primer. |
| 4 | 130mm long Chromium plated steel handle. |
| 5 | Mild steel lock 6 lever with duplicate keys. |
| 6 | Locking system device assembly complete set. |
| 7 | Front door shutter (left or right as per requirement on ground) made out of 1.00mm thick mild steel/CRCA sheet duly painted with one coat of red oxide primer. |
| 8 | Locking device cover. |
| 9 | Almirah medium/small steel (DRG NO. FD-1032/1034) Dismantle following old defective, worn out, unserviceable, rusted, broken parts of article and removing from site and supply and fix in replacement by the following parts including cutting, welding, turning, bending etc complete all as specified and as shown on drawings and as directed. |
| 10 | Leg made out of 1.00mm thick mild steel/CRCA sheet duly painted with one coat of red oxide primer. |
| 11 | Shelf made out of 1.00mm thick mild steel/CRCA sheet duly painted with one coat of red oxide primer. |
| 12 | 130mm long Chromium plated steel handle. |
| 13 | Mild steel lock 6 lever with duplicate keys. |
| 14 | Locking system device assembly complete set. |
| 15 | Front door shutter (left or right as per requirement on ground) made out of 1.00mm thick mild steel/CRCA sheet duly painted with one coat of red oxide primer. |
| 16 | Locking device cover. |
| 17 | Locker steel (DRG NO. FD-1029) Dismantle following old defective, worn out, unserviceable, rusted, broken parts of article and removing from site and supply and fix in replacement by the following parts including cutting, welding, turning, bending etc complete all as specified and as shown on drawings and as directed. |
| 18 | Leg made out of 1.00mm thick mild steel/CRCA sheet duly painted with one coat of red oxide primer. |
| 19 | 100mm long Chromium plated steel handle. |
| 20 | 75mm long Chromium plated steel hasp and staple. |
| 21 | 75mm size mild steel hinge rolled cold heavy weight. |
| 22 | 1.00mm thick Mild steel/CRCA sheet parts of Locker steel including cutting, welding, turning, bending etc. |
| 23 | Table 900mm x 600 mm steel with drawers (DRG NO. FD-1008) Dismantle following old defective, worn out, unserviceable, rusted, broken parts of article and removing from site and supply and fix in replacement by the following parts including cutting, welding, turning, bending etc complete all as specified and as shown on drawings and as directed. |
| 24 | Table top made out of 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws with and including teakwood beading 4mm thick teak wood lipping or beading on all around external sides of block board or particle board width equal to thickness of the board fixed with adhesive and headless mild steel nails and panel pins. |
| 25 | 25x25mm size 1.6mm wall thickness hollow mild steel square pipeas in legs, top rail/side rail and bottom rail. |
| 26 | Mild steel lock of suitable size with duplicate keys. |
| 27 | PVC handle of approved quality suitable for drawer. |
| 28 | Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete. |
| 29 | New drawer made out of 1.00mm thick mild steel/CRCA sheet |
| 30 | PVC/hard rubber toe of approved quality and suitable size. |
| 31 | Table 900mm x 600mm steel without drawer (DRG NO. FD-1007) Dismantle following old defective, worn out, unserviceable, rusted, broken parts of article and removing from site and supply and fix in replacement by the following parts including cutting, welding, turning, bending etc complete all as specified and as shown on drawings and as directed. |
| 32 | Table top made out of 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws with and including teakwood beading 4mm thick teak wood lipping or beading on all around external sides of block board or particle board width equal to thickness of the board fixed with adhesive and headless mild steel nails and panel pins. |
| 33 | 25x25mm size 1.6mm wall thickness hollow mild steel square pipe as in legs, top rail/side rail and bottom rail. |
| 34 | PVC/hard rubber toe of approved quality and suitable size. |
| 35 | Table 900mm x 900mm steel (DRG NO. FD-1009 ) Dismantle following old defective, worn out, unserviceable, rusted, broken parts of article and removing from site and supply and fix in replacement by the following parts including cutting, welding, turning, bending etc complete all as specified and as shown on drawings and as directed. |
| 36 | Table top made out of 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws with and including teakwood beading 4mm thick teak wood lipping or beading on all around external sides of block board or particle board width equal to thickness of the board fixed with adhesive and headless mild steel nails and panel pins. |
| 37 | 25x25mm size 1.6mm wall thickness hollow mild steel square pipe as in legs, top rail/side rail. |
| 38 | PVC/hard rubber toe of approved quality and suitable size. |
| 39 | Teapoy verandah (DRG NO. FD-383) Dismantle following old defective, worn out, unserviceable, rusted, broken parts of article and removing from site and supply and fix in replacement by the following parts including cutting, welding, turning, bending etc complete all as specified and as shown on drawings and as directed. |
| 40 | Table top made out of 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws with and including teakwood beading 4mm thick teak wood lipping or beading on all around external sides of block board or particle board width equal to thickness of the board fixed with adhesive and headless mild steel nails and panel pins. |
| 41 | 25x3mm Mild Steel Flat iron welded with frame under top of teapoy varandah. |
| 42 | PVC/hard rubber toe of approved quality and suitable size. |
| 43 | Table office clerk (steel) (DRG NO. FD-1004/84(M)) Dismantle following old defective, worn out, unserviceable, rusted, broken parts of article and removing from site and supply and fix in replacement by the following parts including cutting, welding, turning, bending etc complete all as specified and as shown on drawings and as directed.. |
| 44 | Mild steel lock of suitable size with duplicate keys. |
| 45 | PVC handle of approved quality suitable for drawer. |
| 46 | Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete. |
| 47 | Table top made out of 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws with and including teakwood beading 4mm thick teak wood lipping or beading on all around external sides of block board or particle board width equal to thickness of the board fixed with adhesive and headless mild steel nails and panel pins. |
| 48 | 25x25mm size 1.6mm wall thickness hollow mild steel square pipeas in legs, top rail/side rail and bottom rail. |
| 49 | PVC/Hard rubber toe of suitable size. |
| 50 | Table office officer (steel) (DRG NO. FD-1003/84(M)). Dismantle following old defective, worn out, unserviceable, rusted, broken parts of article and removing from site and supply and fix in replacement by the following parts including cutting, welding, turning, bending etc complete all as specified and as shown on drawings and as directed. |
| 51 | Mild steel lock of suitable size with duplicate keys. |
| 52 | PVC handle of approved quality suitable for drawer. |
| 53 | Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete. |
| 54 | Table top made out of 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws with and including teakwood beading 4mm thick teak wood lipping or beading on all around external sides of block board or particle board width equal to thickness of the board fixed with adhesive and headless mild steel nails and panel pins. |
| 55 | 25x25mm size 1.6mm wall thickness hollow mild steel square pipeas in legs, top rail/side rail and bottom rail. |
| 56 | PVC/Hard rubber toe of suitable size. |
| 57 | Table computer (DRG NO.FD/E6/MAP/03)Dismantle following old defective, worn out, unserviceable, rusted, broken parts of article and removing from site and supply and fix in replacement by the following parts including cutting, welding, turning, bending etc complete all as specified and as shown on drawings and as directed. |
| 58 | Table top made out of 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws with and including teakwood beading 4mm thick teak wood lipping or beading on all around external sides of block board or particle board width equal to thickness of the board fixed with adhesive and headless mild steel nails and panel pins. |
| 59 | Table side made out of 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws with and including teakwood beading 4mm thick teak wood lipping or beading on all around external sides of block board or particle board width equal to thickness of the board fixed with adhesive and headless mild steel nails and panel pins. |
| 60 | Key board tray complete including telescopic channel |
| 61 | Pull out tray complete including telescopic channel. |
| 62 | Drawer complete including telescopic channel and knob. |
| 63 | Middle shelf including vertical portion complete. |
| 64 | Bottom shelf complete. |
| 65 | Screwable shoes complete. |
| 66 | PVC end caps complete. |
| 67 | Table dining OR Steel (DRG NO. FD-165) Dismantle following old defective, worn out, unserviceable, rusted, broken parts of article and removing from site and supply and fix in replacement by the following parts including cutting, welding, turning, bending etc complete all as specified and as shown on drawings and as directed. |
| 68 | Table top made out of 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws with and including teakwood beading 4mm thick teak wood lipping or beading on all around external sides of block board or particle board width equal to thickness of the board fixed with adhesive and headless mild steel nails and panel pins. |
| 69 | 25x25mm size 1.6mm wall thickness hollow mild steel square pipe as in legs, top rail/side rail and bottom rail. |
| 70 | PVC/Hard rubber toe of approved quality and suitable size. |
| 71 | Chair computer/chair revolving (Drg No.FD/E6/MAP/01,TP) Dismantle following old defective, worn out, unserviceable, rusted, broken parts of article and removing from site and supply and fix in replacement by the following parts including cutting, welding, turning, bending etc complete all as specified and as shown on drawings and as directed. |
| 72 | Tapestry cloth of seat and back complete with rexine of approved design and shade (price of cloth/ rexine shall not be less than Rs 450/- RM) duly fixed with pvc beading/edging . |
| 73 | New seat and back complete. |
| 74 | Hydraulic shocker of suitable size. |
| 75 | Push back plate complete all as specified and directed. |
| 76 | Base (padestal assy) PVC/Iron of suitable size and pattern. |
| 77 | PVC Wheel of suitable size and pattern. |
| 78 | Arms as requred by size and design.Note:- sample and shade of materials will be determined as per actual requirement at site. |
| 79 | Chair School With Hand Board (FD/E6/MAP/05) Dismantle following old defective, worn out, unserviceable, rusted, broken parts of article and removing from site and supply and fix in replacement by the following parts including cutting, welding, turning, bending etc complete all as specified and as shown on drawings and as directed. |
| 80 | Hand board made out of 18 mm thick pre laminated MDF board top including 25 mm hollow steel pipe inserted in 20 mm MS rod welded to frame openable with PVC edging (Hinged on RHS) screwed to as in replacement of chair school with hand board including dimantling of unsv components/parts complete all as specified and shown on drg as complete all as specified and as directed by Engr- in-Charge. |
| 81 | PVC seat & back and S&F new moulded one piece PVC Seat & Back. |
| 82 | Base tray (Jali) duly welded. |
| 83 | MNF Set (FD-227/220) |
| 84 | Painting of MNF set of charpoy GI pipe/newar with black colour synthetic enameled paint with brush including welding complete all as specified and directed. |
| 85 | Form without Back Drg. FD-1027.Dismantle following old defective, worn out, unserviceable, rusted, broken parts of article and removing from site and supply and fix in replacement by the following parts including cutting, welding, turning, bending etc complete all as specified and as shown on drawings and as directed. |
| 86 | S&F in replacement new Wooden plank of 2nd class hard wood of size 1525x255x25mm thick fixed with GI nuts,bolts and 65mm x 6mm washers complete all as specified and as shown on drawings and as directed. |
| 87 | Desk (FD-1021) Dismantle following old defective, worn out, unserviceable, rusted, broken parts of article and removing from site and supply and fix in replacement by the following parts including cutting, welding, turning, bending etc complete all as specified and as shown on drawings and as directed. |
| 88 | Desk top made out of 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws with and including teakwood beading 4mm thick teak wood lipping or beading on all around external sides of block board or particle board width equal to thickness of the board fixed with adhesive and headless mild steel nails and panel pins. |
| 89 | Desk bottom portion made out of 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws with and including teakwood beading 4mm thick teak wood lipping or beading on all around external sides of block board or particle board width equal to thickness of the board fixed with adhesive and headless mild steel nails and panel pins. |
| 90 | Desk side portion made out of 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws with and including teakwood beading 4mm thick teak wood lipping or beading on all around external sides of block board or particle board width equal to thickness of the board fixed with adhesive and headless mild steel nails and panel pins. |
| 91 | Desk rear/back portion made out of 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws with and including teakwood beading 4mm thick teak wood lipping or beading on all around external sides of block board or particle board width equal to thickness of the board fixed with adhesive and headless mild steel nails and panel pins. |
| 92 | Rack Shoe Steel (FD/E6/MAP/2(R)Dismantle following old defective, worn out, unserviceable, rusted, broken parts of article and removing from site and supply and fix in replacement by the following parts including cutting, welding, turning, bending etc complete all as specified and as shown on drawings and as directed. |
| 93 | 25x25mm size 1.6mm wall thickness hollow mild steel square pipe . |
| 94 | New Jali with frame including necessary denting, repairing, welding complete. Jali should be 3mm dia and frame 19mm dia 18 guage thick. |
| 95 | Chair Verandah (Drg No. FD-359)Dismantle following old defective, worn out, unserviceable, rusted, broken parts of article and removing from site and supply and fix in replacement by the following parts including cutting, welding, turning, bending etc complete all as specified and as shown on drawings and as directed. |
| 96 | M&L for recanning the Chair Verandah woven with 4-5mm half round 0.6mm thick plastic cane in Godrej pattern, including dismantling existing unserviceable plastic cane and removing from site, complete all as specified, shown on drawing and directed. |
| 97 | PVC shoe of approved quality as specified and directed. |
| 98 | Spot welding on various items of steel furniture FD/TP |
| 99 | Painting to Steel Furniture(i) M&L for preparation of old painted iron and steel surface (Externally & internally complete) of any description of following steel furniture articles by scraping & rubbing down with sand paper, removing dents & scratches, if any, filling the same with paste filter and applying one coat of synthetic enamel paint (1st gde quality) of approved colour with brush or by spray machine complete all as specified, shown on drawings and directed. (steel portion) (ii) M&L for preparation of old wooden polished surface of the following furniture article by cleaning dirt and stopping holes by filling putty (mixture of fine saw dust, Fevicol, water and colour), adding colour (Raw Sienna/Turkey Umber) of required quantity to obtain the desired colour, wiping old superfluous filler and allowing it to dry, rubbing off surfaces with sand paper until a smooth surface is achieved, wiping off the polish from other than wooden surfaces with polish thinner, and applying French polish till a glossy finish is achieved, complete all as specified, shown on drawings and directed. (Wooden portion) NOTE:- Steel portion shall be painted and wooden portion shall be french poloshed of a furnture article. The one article containg both finishes shall be measured as one article. |
| 100 | Almirah steel large with shelf/almirah steel large 1/2H 1/2 shelf FD-1031/FD/E6/MAP/18 |
| 101 | Almirah medium/small steel. Drg. No. (FD-1032/1034) |
| 102 | Locker steel. Drg. No. FD-1029 |
| 103 | Table 900x600x760 steel with drawer. Drg. No. FD-1008. |
| 104 | Table 900x600x760 steel without drawer. Drg. No. FD-1007. |
| 105 | Table 900x900x760 steel. Drg. No. FD-1009. |
| 106 | Teapoy varandah steel. Drg. No. FD-383. |
| 107 | Table office clerk steel., Drg. No. FD-1004/84(M). |
| 108 | Table office officer steel. , Drg. No. FD-1003/84(M). |
| 109 | Table computer frame. |
| 110 | Table dining OR steel. Drg.No.FD-165. |
| 111 | Chair school with hand board (FD/E6/MAP). |
| 112 | Form without back, Drg. No. FD- 1027. |
| 113 | Desk, Drg. No. FD-102. |
| 114 | Rack shoe steel.FD/E6/MAP/02(R) |
| 115 | Chair Verandah (Drg No. FD-359) |
| 116 | Trestle store room iron.(Drg No. FD-86& 1043) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender