Tender For Dnit For Restoration Of Fatehgarh Churian Ramdas Road & Kamalpur Ramdas Road In District Amritsar.
Tender Value
49.97 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
6 days left
EMD
10000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Dnit For Restoration Of Fatehgarh Churian Ramdas Road & Kamalpur Ramdas Road In District Amritsar.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical specifications |
| 2 | Providing and laying bituminous macadam 50mm to 75mm thick with Continous type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @3.4%, carriage of mixed material to site of work, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction complete as per technical clause 504 of MORT&H specifications |
| 3 | Notes:-I. The actual volume of the aggregate to be paid for shal lbe computed after deducting the specified percentage from the volume computed by stacks measurement as per MORT&H specifications (addendum to latest revision) for the purpose of secured advance.II. The final grading for the aggregates requiredfor bitumenious macadam course Grading-2 for 75mm /50mm thickness of each layer conforming to table 500-7 of MORT&H specifications (addendum to latest revision) shall be determined after getting the bituminous macadam grading-2 designed from Punjab PWD B&R Research Laboratory Patiala after obtaining 60% of material. The design mix so finally approved by shall be termed as the approved mix. The aggregates shall be hydrophobic and of low porosity. The aggregates shall satisfy the physical requirement set fourth in table 500-6 (addendum to latest revision). |
| 4 | III. The mix shall exhibit the following details:a) Binder expressed as a percentage by weight of total mix.b) Coarse aggregate of 26.5mm gauge expressed as percentage by weight of total mix.c) Crushed Bajri of 11.2mm size expressed as percentage by weight of total mix.d) Fine aggregates 4.75 mm below expressed as percentage by weight of total mix.e) A single definite percentage passing each sieve for mixed aggregates.f) Density of Bituminous Macadam (75mm /50mm thick after compaction) shall be minimum 2.2 gms/C.C & nothing extra shall be payable if higher density is achieved at site.IV) The contractor thereafter, shall be required to complete the supply of various ingradients or Bituminious Macadam as per proportions stipulated in the approved mix.V) Rate of B.M. shall be quoted by the contractor with respect to binder content percentage by weight of mix being 3.4% if Laboratory designs a mix with different percentage then the differenc |
| 5 | Providing and applying tack coat with bitumen using emulsion R.S pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of MORT&H specifications |
| 6 | Providing and laying bituminous concrete 30mm to 45mm thick with Continuous type HMP using with paver finisher mechanical crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4%, carriage of mixed material to site of work, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 509 of MORT&H specifications |
| 7 | NOTES : -(i) Job mix formula for the bituminous concrete shall be provided by the agency and shall be got approved from Punjab PWD, B&R Research Laboratory Patiala before adoption at site for execution.(ii) The specification of this item for analytic purpose is kept with bitumen content @ 5.4% weight of mix variation as compared with job mix formula shall be paid / deducted accordingly. The limits of variation shall be worked out with the approved formula.TECHNICAL NOTE : -i.) Apart from the confirmity with the grading and quantity requirement of invidual ingredients exhibited above the mix aggregate i.e.coarse and fine aggregate for bituminous concrete shall meet all requirements set forth clause 507 of MORT&H 5th Revision specifications. |
| 8 | ii) The final grading for the aggregates required for bituminous concrete confirming to table 500.17 of MORT&H 5th Revision specifications shall be determined after getting the bituminous concrete designed from Punjab PWD, B&R Research Laboratory Patiala after obtaining 60% of material. The design mix so finally approved shall be termed as the approved mix. The aggregates shall be hydrophobic and of low porosity. The aggregates shall satisfy the physical requirement set fourth in table 500-6 (addendum to latest revision).iii.) The approved mix shall exhibit the following details, source and location of all material:-(a) Binder expressed as percentage by weight of total mix.(b) Course expressed as percentage by weight of total mix.(c) Crushed bajri expressed as percentage by weight of total mix.(d) Fine aggregate expressed as percentage by weight of total mix.(e) A single definite percentage passing each sieve for mixed aggregates. f) Density of dense bituminous macadam after compaction will be not less than 2.35 gm/CC |
| 9 | Construction of Brickwork Drain on side of the road. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender