Tender For Providing & Fixing Of Street Light In Residential Quarters (Type-I, Ii& Iii) And Supply & Installation Of 15 Hp Starter For Monoblock Motor At Pump House Under Shq Bsf Jsmr-South (Sh:1 Providing & Fixing Of Street Light In Residential Quar
Tender Overview
Project Description
Tender for Providing & Fixing Of Street Light In Residential Quarters (Type-I, Ii& Iii) And Supply & Installation Of 15 Hp Starter For Monoblock Motor At Pump House Under Shq Bsf Jsmr-South (Sh:1 Providing & Fixing Of Street Light In Residential Quarters (Type-I, Ii& Iii).
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. |
| 2 | i) 75 mm X 75 mm X 60 mm deep |
| 3 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. |
| 4 | i) 5/6 amps switch. |
| 5 | Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required |
| 6 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt).Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C |
| 7 | i) 35 watt |
| 8 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following |
| 9 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 10 | Supplying of one number PVC insulated and PVC sheathed / XLPE solid copper power cable of 1.1 kV grade of following size etc as required (i)2x 1.5 sqmm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender