Tender For repair maintenace & Upkeeps Of Itpo Premises During 2026-27. Sh:- White Wash Work At Hall No. 1,2,3,4,5,14 Gf & Ff,6 I/C Gate No3, 4,5A,5B Etc.
Tender Value
1.90 Crore
Estimated cost
Bid Submission
30 Jul 2026
7 days left
EMD
3.80 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for repair maintenace & Upkeeps Of Itpo Premises During 2026-27. Sh:- White Wash Work At Hall No. 1,2,3,4,5,14 Gf & Ff,6 I/C Gate No3, 4,5A,5B Etc.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 2 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1cement: 4 coarse sand) |
| 3 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :one or more coats on Old work. |
| 4 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :one or more coats on Old work. |
| 5 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :Old work (one or more coats) |
| 6 | Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centreto centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing ofgypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 7 | Melamine polishing on wood work (one or more coat). |
| 8 | Providing and hiring of Telescopic Boom Lift having working height up to 80 feet, including deployment of skilled operator, fuel, lubrication, AMC/CMC, all maintenance, breakdown support, and all necessary accessories, complete for smooth operation at site. |
| 9 | Spray Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :one or more coats on Old work. |
| 10 | providing and applying spray painting with polyurethane paint of approved brand and manufacture to old surfaces, in one or more coats as required, to obtain an even and uniform shade, including surface preparation, cleaning , rubbing/ sanding, filling minor imperfections, masking of adjoining surfaces, labour, materials, equipment,scaffolding, and includental charges, complete in all respects, as directed by the Engineer-in- Charge |
| 11 | Note: The rates should be quoted inclusive of GST as applicable Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender