Tender for Tender for Lot No 04 Renovation Work Of Gangotri Bhavan And Its Premises Located At Roorkee Headquarters Under The Roorkee Division Of The Parallel Deoband Branch In Haridwar District
Tender Value
5.09 Crore
Estimated cost
Bid Submission
30 Jul 2026
3 days left
EMD
10.20 Lakhs
Bank guarantee accepted
Document Fee
2714
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Lot No 04 Renovation Work Of Gangotri Bhavan And Its Premises Located At Roorkee Headquarters Under The Roorkee Division Of The Parallel Deoband Branch In Haridwar District
BOQ
| Sl. No. | Item Description |
| 1 | Ist Class Brick Work in 1:4 cement mortar for Ground floor i/c cost of all material, Labour, T&P, lead & Lifts etc. required for proper completion of work . |
| 2 | Dismanteling & Laying Brick Work in 1:4 cement mortar for i/c cost of all material, Labour, T&P, lead & Lifts etc. required for proper completion of work at GROUND FLOOR |
| 3 | Dismanteling & Laying Brick Work in 1:4 cement mortar for i/c cost of all material, Labour, T&P, lead & Lifts etc. required for proper completion of work at FIRST FLOOR |
| 4 | Dismanteling & Laying Brick Work in 1:4 cement mortar for i/c cost of all material, Labour, T&P, lead & Lifts etc. required for proper completion of work at SECOND FLOOR |
| 5 | Dismanteling & Laying Brick Work in 1:4 cement mortar for i/c cost of all material, Labour, T&P, lead & Lifts etc. required for proper completion of work at TERRACE |
| 6 | Dismanteling & Laying 12/12.50 mm thick plaster in 1:4 cement mortar for i/c cost of all material, Labour, T&P, lead & Lifts, with disposal of debris etc. required for proper completion of work at BOUNDARY WALL |
| 7 | Dismanteling & Laying 12/12.50 mm thick plaster in 1:4 cement mortar for i/c cost of all material, Labour, T&P, lead & Lifts, with disposal of debris etc. required for proper completion of work at GROUND FLOOR |
| 8 | Dismanteling & Laying 12/12.50 mm thick plaster in 1:4 cement mortar for i/c cost of all material, Labour, T&P, lead & Lifts, with disposal of debris etc. required for proper completion of work at FIRST FLOOR |
| 9 | Dismanteling & Laying 12/12.50 mm thick plaster in 1:4 cement mortar for i/c cost of all material, Labour, T&P, lead & Lifts, with disposal of debris etc. required for proper completion of work at SECOND FLOOR |
| 10 | Dismanteling & Laying 12/12.50 mm thick plaster in 1:4 cement mortar for i/c cost of all material, Labour, T&P, lead & Lifts, with disposal of debris etc. required for proper completion of work at TERRACE |
| 11 | Repair of Random rubble masonry with hard stone in foundation and plinth & super structure in 1:4 cement mortar including labour and T&P etc Complete. |
| 12 | Random rubble masonry with hard stone in foundation and plinth & super structure in cement mortar including labour and T&P etc Complete. |
| 13 | Cement Pointing 1:2 (Struck Deep)on stone masonry including cost of all material,labour and T&P Lead & Lifts with disposal,etc Complete. |
| 14 | Centering & shuttering for RCC work including cost of all material , Labour , T&P, Scaffolding as required etc. for proper completion of work . |
| 15 | Dismanteling & Laying M-20 (1:1.5:3) Reinforced Cement Concrete i/c cost of all material , Labour , T&P, Mechnical Mixing & Vibration etc . For proper completion of work but excluding cost of reinforcement steel per Cum. at GROUND FLOOR |
| 16 | Dismanteling & Laying M-20 (1:1.5:3) Reinforced Cement Concrete i/c cost of all material , Labour , T&P, Mechnical Mixing & Vibration etc . For proper completion of work but excluding cost of reinforcement steel per Cum. at FIRST FLOOR |
| 17 | Dismanteling & Laying M-20 (1:1.5:3) Reinforced Cement Concrete i/c cost of all material , Labour , T&P, Mechnical Mixing & Vibration etc . For proper completion of work but excluding cost of reinforcement steel per Cum. at SECOND FLOOR |
| 18 | Dismanteling & Laying M-20 (1:1.5:3) Reinforced Cement Concrete i/c cost of all material , Labour , T&P, Mechnical Mixing & Vibration etc . For proper completion of work but excluding cost of reinforcement steel per Cum. at TERRACE |
| 19 | Supply & fixing steel reinforcement (sail steel) for RCC work including cost of steel , cutting , Binding, Binding wire & Placing in postion including cost of all material , Labour,T&P etc for proper completion of work per Kg. |
| 20 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approvedtexture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.including cost of all material , Labour,T&P etc for proper completion of work. |
| 21 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead including cost of all material , Labour,T&P etc for proper completion of work. Of area 3 sq. metres and below |
| 22 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead including cost of all material , Labour,T&P etc for proper completion of work. Of area beyond 3 sq. metres |
| 23 | Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash andmullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall befilled with weather proofs ilicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. 9.147.A4.1 Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre) including cost of all material , Labour,T&P etc for proper completion of work. |
| 24 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge: For fixed portion ,Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including cost of all material , Labour,T&P etc for proper completion of work. ( aluminium section shall be of reputed make & manufacturer like Jindal, Hindalco, Nalco etc.) |
| 25 | Providing and fixing anodised aluminium grill (anodised transparentor dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment) including cost of all material , Labour,T&P etc for proper completion of work. ( aluminium section shall be of reputed make & manufacturer like Jindal, Hindalco, Nalco etc.) |
| 26 | Distempering ( first & second coat ) with oil bound distemper of approved brand and manufacturer and of required shade on undecorated wall surface to give an even shade over and including priming coat with cement primer of approved brand an manufacturer such as Berger,J& N ,Shalimar ,Asian paint after thoroughly brushing the surface free from mortar dropping and other forign matters and also including the surface even with plaster of paris or approved synthetic materials and sand papered smooth including supply of all materials labour. Tools & Plant etc. required for proper completion of the work . |
| 27 | Painting (1st& 2nd ) coat over priming coat (but excluding cost of priming coat) on steel and other metal surface including cleaning the surface of all dirt, dust and other foreign matter ,sand papering and stopping including cost of material labour tool and plants etc as required for proper completion of work. Paint shall be used as per standard I.S. specification. (Paint used shall be of reputed brand an manufacturer such as Berger,J& N ,Shalimar ,Asian paint etc.) |
| 28 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead including cost of all material , Labour,T&P etc for proper completion of work. |
| 29 | Pebble dash plaster upto 10 m height above ground level with a mixture of washed pebble or crushed stone 6 mm to 12.5 mm nominal size, dashed over and including fresh plaster in two layers under layer 12 mm cementplaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement including cost of all material , Labour,T&P etc for proper completion of work. |
| 30 | Providing and fixing vitreous China dual purpose W.C pan with white solid plastic seat and with white vitreous china flushing cistern and C.P flush bend ISI Mark Kajaria equivalent Indian made brand with all fitting and fixtures complete including cost of all material , Labour,T&P etc for proper completion of work. |
| 31 | Providing and fixing white vitreous china flat back half stall Urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:. Range of two half stall urinals with 5 litre PVC. automatic flushing cistern including cost of all material , Labour,T&P etc for proper completion of work. (Urinal used shall be of reputed brand an manufacturer such ISI Mark Kajaria, cera & Jaquar etc. equivalent Indian made brand) |
| 32 | Providing and fixing wash basin with CI bracket, 15 mm C.P brass pillar taps,32 mm brass waste of standard pattern , including painting of fitting and bracket cutting and making good the walls wherever required. white Vitreous China Wash basin size 630*450 mm with a pair of 15 mm CP brass pillar tap including cost of all material , Labour,T&P etc for proper completion of work. (Urinal used shall be of reputed brand an manufacturer such as ISI Mark Kajaria, Cera & Jaquar etc. equivalent Indian made brand) |
| 33 | Supply and fixing 35 mm thick indian commercial flush doors commercial quality including fixing of wooden cleats and stoppers and fitting with Aluminium fittings and necessary screws complete including cost of all material , Labour,T&P etc for proper completion of work. ( flush doors used shall be of reputed brand and manufacturer such as ISI Mark Century Ply, Green ply & Zander Ply, Archidply etc. equivalent Indian made brand) |
| 34 | Supply & fixing Galvanized Mosquitos proof heavy S.S Wire gauge heavy quality over window including supply of teak wood batten 8cm*1.cm (3\\"*3/6\\") flat iron 25*4mm and including supply of necessary screws including cost of all material , Labour,T&P etc for proper completion of work. |
| 35 | Supply and Fixing CPVC pipe having thermal stability for hot & cold water including all CPVC plain and brass threaded fitting i/c fixing the pipe with clamps 1.0 m spacing. 20mm Dia. including cost of all material , Labour,T&P etc for proper completion of work. ( CPVC pipe used shall be of reputed brand and manufacturer such as ISI Mark Finolex, Supreme , Astral etc. equivalent Indian made brand) |
| 36 | Supply and Fixing of P.V.C. water tank 1000 liters Sintex or equivalent with Ball valve (brass) of approved quality with P.V.C. ball float complete in 15mm dia. including cost of all material , Labour,T&P etc for proper completion of work. |
| 37 | M.S./Iron work of small size and section such as MS Grills, gates, and other repairing works, including cost of all material, labour T&P etc complete in all respect. Per Qtl. |
| 38 | P/F cup board / almirah shutter with 25mm thich veneered particle board IS 3097 marked exterior grade I of approved make including IInd class teak wood lipping with necessary screw, bright finished fittings complete including cost of all material , Labour,T&P etc for proper completion of work. |
| 39 | Dismanteling & Laying 2.5 cm thick plain cement concrete (1:2:4) in flooring with cement , coarse sand & 2 cm. Graded approved stone grit without base concrete i/c cost of all material. Labour.T&P, lead & lifts with disposal , mechanical mixing etc. required for proper completion of work. |
| 40 | Supply and fixing 6 to 8 mm thick ivory or light shades vitrified tiles 600*600 mm size in flooring and skirting with 1:3 approved cement and coarse sand mortar finished within its cement colour slurry jointing and polished of approved quality complete including cost of all material , Labour,T&P etc for proper completion of work. ( vitrified tiles used shall be of reputed brand and manufacturer such as ISI Mark Kajariya, Somany , Nitco etc. equivalent Indian made brand) |
| 41 | Dismanteling & Laying 12/12.50 mm thick plaster in 1:4 cement mortar for i/c cost of all material, Labour, T&P, lead & Lifts, with disposal of debris etc. required for proper completion of work . |
| 42 | Supply and fixing 6mm china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including cost of all material , Labour,T&P etc for proper completion of work. ( glazed tiles used shall be of reputed brand and manufacturer such as ISI Mark Kajariya, Somany , Nitco etc. equivalent Indian made brand) |
| 43 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes, 100 mm diameter i/c with bend, socket neccesary MS clamp and nells complete including cost of all material , Labour,T&P etc for proper completion of work. ( PVC rain water pipes used shall be of reputed brand and manufacturer such as ISI Mark Supreme, Astral , Prince etc. equivalent Indian made brand) |
| 44 | Supply and fixing of kota stone in flooring 20mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an shade with 12mm base coat (bedding) of 1:2 cement & coarse sand morter and polished by hand or machine and finally finished with french manson polish or other reputed polish including supply of all materials,labour,Tools &plants etc. required for proper completion of the work. |
| 45 | Demolishing mud phaska in terracing and disposal of material within 50m lead including cost of all material , Lift, Labour,T&P etc for proper completion of work. |
| 46 | Laying Cement Conc. , M-20 (1:1.5:3) i/c cost of all material, Labour, T&P, Lead & Lifts with disposal, mechanical mixing etc required for proper completion of work . |
| 47 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineerin-Charge. including cost of all material , Labour,T&P etc for proper completion of work. ( liquid water proofing used shall be of reputed brand and manufacturer such as ISI Mark Dr. Fixit, Asian, Berger , Home Shield etc. equivalent Indian made brand) |
| 48 | Laying Cement Conc. , M-20 (1:1.5:3) i/c cost of all material, Labour, T&P, Lead & Lifts with disposal, mechanical mixing etc required for proper completion of work . |
| 49 | Providing and erecting direction and place identification retro- reflectiorised sign as per IRC-67 made of high intensity grade sheeting the retro -reflective sheeting type -4 shall be tested for 3 year outdoor weathering test in indian conditions asper IRC 67-2012 & proof of the same in form of government report shall be uploaded while quoting tender vide MOR&th clause 801.3 fixed over aluminium sheeting 2mm thick with area exceeding 0.90sqm supported on a mild steel single angle iron post 75*75*6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45*45*60c.m below ground level as per approved drawing complete as per direction of Eng.in Charge. |
| 50 | Supply and fixing Galvanized corrugated iron roofing 24 B.W.G. in position including supply of all materials, labour, Tools &plants etc. required for proper completion of the work and including wastage. ( Galvanized corrugated iron roofing 24 B.W.G. used shall be of approved brand and manufacturer such as ISI Mark Tata Steel, SAIL, JSW , etc. equivalent Indian made brand) |
| 51 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing ,curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.11.56.1 Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent sqm including cost of all material , Labour,T&P etc for proper completion of work. ( Polished Granite stone used shall be of reputed brand and manufacturer such as ISI Mark RK marbles, Bhandari Marble Group, Pokarna, Classic etc. equivalent Indian made brand) |
| 52 | Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 14.28.1 20 mm diameter including cost of all material , Labour,T&P etc for proper completion of work. ( brass curtain rods used shall be of reputed brand and manufacturer such as ISI Mark Deco, Godrej, D'Decor, T-Boz etc. equivalent Indian made brand) |
| 53 | Providing and fixing bright finished brass helical door spring (superior quality) including cost of all material , Labour,T&P etc for proper completion of work. ( brass helical door used shall be of reputed brand and manufacturer such as ISI Mark Ritz metal work, Volo, Yen etc. equivalent Indian made brand) |
| 54 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each 1607.95 including cost of all material , Labour,T&P etc for proper completion of work. |
| 55 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs including cost of all material , Labour,T&P etc for proper completion of work. |
| 56 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms including cost of all material , Labour,T&P etc for proper completion of work. |
| 57 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore including cost of all material , Labour,T&P etc for proper completion of work. |
| 58 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge: For fixed portion ,Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including cost of all material , Labour,T&P etc for proper completion of work. (aluminium work for doors, windows, ventilators and partitions shall be of reputed make & manufacturer like Fenesta, Asahi ,Supreme etc.) FOR PARTITIONS |
| 59 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge: For fixed portion ,Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including cost of all material , Labour,T&P etc for proper completion of work. (aluminium work for doors, windows, ventilators and partitions shall be of reputed make & manufacturer like Fenesta, Asahi ,Supreme etc.) FOR DOORS |
| 60 | Providing and fixing 12 mm thick Pre- laminated particle board with decorative lamination on one side and balancing lamination on other side including cost of all material , Labour,T&P etc for proper completion of work. |
| 61 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of all material , Labour,T&P etc for proper completion of work. |
| 62 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of all material , Labour,T&P etc for proper completion of work. |
| 63 | Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete : 25 mm thick including cost of all material , Labour,T&P etc for proper completion of work. |
| 64 | Float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/sqm) including cost of all material , Labour,T&P etc for proper completion of work. |
| 65 | Providing & Laying 80 mm thick paver blocks of M-35 grade factory made chamfered edge Cement Concrete paver blocks in footpath of Parks,of req. strenght,thicness & size/shape,made by table vibratory method using PU mould,laid in required colour & pattern over 50 mm thick compacted bed of sand , compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator , filling the joints with sand and cutting of paver blocks as per req. size and pattern, finishing and sweeping extra sandincluding cost of all material , Labour,T&P etc for proper completion of work. |
| 66 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture including cost of all material , Labour,T&P etc for proper completion of work. |
| 67 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% including cost of all material , Labour,T&P etc for proper completion of work. |
| 68 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) including cost of all material , Labour,T&P etc for proper completion of work. Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration including cost of all material , Labour,T&P etc for proper completion of work. |
| 69 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) including cost of all material , Labour,T&P etc for proper completion of workTreatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole :With Chlorpyriphos/Lindane E.C. 20% with 1% concentration including cost of all material , Labour,T&P etc for proper completion of work. |
| 70 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box, piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc complete in all respect as directed including matching colour wash. Same as in item 138 (B) but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside. |
| 71 | Wiring point for two ways light with 1.5 sq. mm. F.R. PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire , GP Box and two number two way piano type switches & ceiling rose / angle / batten holder on 3 mm thick phanolic laminated backelite sheet etc., complete in all respect, as directed, including matching colour wash.Same as in item 139(B)but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. |
| 72 | Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose on 3 mm. thick backelite sheet etc., complete in all respect including matching colour wash.Same as in item 140 (B) but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. |
| 73 | Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with14 SWG copper earth continuity wire and piano type switch and socket etc., complete in all respect including matching colour wash. Same as in item 141(B) but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. |
| 74 | Wiring point for call bell with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting complete with 14 SWG copper earth continuity wire GP Box and piano type bell push or 2 pin socket etc, complete in all respect including matching colour wash. Same as in item 142 (B) but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. |
| 75 | Supply and fixing of switch box 100 x 100 x 50 mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet All 4 corners folded & spot welded for screw and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes shuld be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. |
| 76 | Supply and fixing of switch box 150 x 150 x 65 mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet All 4 corners folded & spot welded for screw and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes shuld be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. |
| 77 | Supply and fixing of switch box 175 x 100 x 50 mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet All 4 corners folded & spot welded for screw and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes shuld be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. |
| 78 | Supply and fixing of Switch Box in Addition when modular type switches etc. are used in place of piano type switches etc. in various wiring points. Add for light / fan points with modular type switch in place of piano type switch .Add for light / fan points with modular type switch in place of piano type switch. |
| 79 | Supply and fixing of Switch Box in Addition when modular type switches etc. are used in place of piano type switches etc. in various wiring points. Add for light / fan points with modular type switch in place of piano type switch . Add for 2 way light point with modular switches in place of piano type switches. |
| 80 | Supply and fixing of Switch Box in Addition when modular type switches etc. are used in place of piano type switches etc. in various wiring points. Add for light / fan points with modular type switch in place of piano type switch . Addition when modular type switches etc. are used in place of piano type switches etc. in various wiring points. Add for plug point with modular switch & socket in place of piano type switch & socket. |
| 81 | Supply and fixing of Switch Box in Addition when modular type switches etc. are used in place of piano type switches etc. in various wiring points. Add for light / fan points with modular type switch in place of piano type switch . Addition when modular type switches etc. are used in place of piano type switches etc. in various wiring points. Add for Call bell point with modular type bell push in place of piano type bell push. |
| 82 | Supply and fixing and concealing of X mm dia. Xmm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge. 20 mm dia 2 mm thick PVC conduit. |
| 83 | Supply and fixing and concealing of X mm dia. Xmm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge. 25 mm dia 2 mm thick PVC conduit. |
| 84 | Supply and fixing and concealing of X mm dia. Xmm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge. 32 mm dia. PVC conduit. |
| 85 | Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with one number 14 SWG copper earth continuity wire including matching colour wash etc. complete in all respect.As in item no. 221(B) but in 20 mm dia heavy duty (2 mm thick) PVC conduit with one no. 2.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit. |
| 86 | Supply and wiring of submain with two number 10 sq. mm. PVC insulated 1100 V grade single core aluminium conductor cable in 25 mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab along with reinforcement before concreting, with one number 8 SWG GI earth continuity wire including matching colour wash etc. complete in all respect.As in item no. 223 (B) but in 25 mm dia heavy duty (2 mm thick) PVC conduit with one No.6 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit. |
| 87 | Supply and wiring of 4 number 10 sq. mm. FRLSH PVC insulated 1100 V grade single core Copper conductor cable in 32 mm dia heavy guage rigid steel conduit on surface, with two number 6 sq mm single core Copper conductor cable as earth continuity wire drawn in coudit , complete in all respect. |
| 88 | Supply and wiring of 4 number 16 sq. mm. PVC insulated 1100 V grade single core Copper conductor cable in 40 mm dia PVC conduit on surface, with two number 10sq mm single core Copper conductor cable as earth continuity wire drawn in coundit , complete in all respect. |
| 89 | Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AAA |
| 90 | Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. CAT- AAA |
| 91 | Supply and fixing of Single LED light wall bracket 3 to 6 Watt on matching M.D.F.E.G Board base etc. complete in all respect. CAT- AAA |
| 92 | Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in all respect.CAT- AAA |
| 93 | Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work. |
| 94 | Erection and testing of ceiling fan and regulator etc. excluding supply of down rod, complete in all respect. |
| 95 | Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc., complete in all respect. |
| 96 | Supply and fixing of 16 gauge M.S. drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect. |
| 97 | Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect. |
| 98 | Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. |
| 99 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve, CAT A |
| 100 | S&F and making connection of 25A 2 pole 30mA ELCB/ RCCB of Din Rail Mounting complete in all respect as per direction and satisfaction to the Engineer in charge. |
| 101 | S&F and making connection of 40A 2 pole 30mA ELCB/RCCB of Din Rail Mounting complete in all respect as per direction and satisfaction to the Engineer in charge. |
| 102 | S&F and making connection of 63 Amp. 4 pole 30mA ELCB/RCCB of Din Rail Mounting complete in all respect as per direction and satisfaction to the Engineer in charge. |
| 103 | S&F surface/flush mounting 4 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A |
| 104 | S & F surface/Flush mounting 12 ways SPN distribution board with additional metal door without MCB complete in all respect, as Direct by Engineer in Charge. CAT A |
| 105 | S & F surface/Flush mounting 6ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge.CAT A |
| 106 | S & F surface/Flush mounting 8ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A |
| 107 | S & F surface/Flush mounting 12ways TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. CAT A |
| 108 | Supply and fixing of 3 Watt to 6 Watt LED Spot/Spike light luminaire Confirming to IP 66 Protection complete in all respect. CAT-AAA |
| 109 | Supply and fixing of decorative 8 to 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect. CAT-AA |
| 110 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 70 to 90 Watt. Confirming to IP 65 protection complete in all respect. CAT-AA |
| 111 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect. CAT- AA |
| 112 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt. Confirming to IP66 Protection complete in all respect. CAT- AA |
| 113 | Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. |
| 114 | Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. |
| 115 | Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. |
| 116 | Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. |
| 117 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 6 sq. mm 4 core |
| 118 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 4 sq. mm 3 core |
| 119 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer In charge. 6 sq. mm 4 core |
| 120 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer In charge.4 sq. mm 3 core |
| 121 | Ist Class Brick Work in 1:4 cement mortar for Ground floor i/c cost of all material, Labour, T&P, lead & Lifts etc. required for proper completion of work . |
| 122 | Dismanteling & Laying Brick Work in 1:4 cement mortar for i/c cost of all material, Labour, T&P, lead & Lifts etc. required for proper completion of work at GROUND FLOOR |
| 123 | Dismanteling & Laying Brick Work in 1:4 cement mortar for i/c cost of all material, Labour, T&P, lead & Lifts etc. required for proper completion of work at FIRST FLOOR |
| 124 | Dismanteling & Laying Brick Work in 1:4 cement mortar for i/c cost of all material, Labour, T&P, lead & Lifts etc. required for proper completion of work at SECOND FLOOR |
| 125 | Dismanteling & Laying Brick Work in 1:4 cement mortar for i/c cost of all material, Labour, T&P, lead & Lifts etc. required for proper completion of work at TERRACE |
| 126 | Dismanteling & Laying 12/12.50 mm thick plaster in 1:4 cement mortar for i/c cost of all material, Labour, T&P, lead & Lifts, with disposal of debris etc. required for proper completion of work at GROUND FLOOR |
| 127 | Dismanteling & Laying 12/12.50 mm thick plaster in 1:4 cement mortar for i/c cost of all material, Labour, T&P, lead & Lifts, with disposal of debris etc. required for proper completion of work at FIRST FLOOR |
| 128 | Dismanteling & Laying 12/12.50 mm thick plaster in 1:4 cement mortar for i/c cost of all material, Labour, T&P, lead & Lifts, with disposal of debris etc. required for proper completion of work at SECOND FLOOR |
| 129 | Dismanteling & Laying 12/12.50 mm thick plaster in 1:4 cement mortar for i/c cost of all material, Labour, T&P, lead & Lifts, with disposal of debris etc. required for proper completion of work at TERRACE |
| 130 | Repair of Random rubble masonry with hard stone in foundation and plinth & super structure in 1:4 cement mortar including labour and T&P etc Complete. |
| 131 | Cement Pointing 1:2 (Struck Deep)on stone masonry including cost of all material,labour and T&P Lead & Lifts with disposal,etc Complete. |
| 132 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approvedtexture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.including cost of all material , Labour,T&P etc for proper completion of work. |
| 133 | Distempering ( first & second coat ) with oil bound distemper of approved brand and manufacturer and of required shade on undecorated wall surface to give an even shade over and including priming coat with cement primer of approved brand an manufacturer such as Berger,J& N ,Shalimar ,Asian paint after thoroughly brushing the surface free from mortar dropping and other forign matters and also including the surface even with plaster of paris or approved synthetic materials and sand papered smooth including supply of all materials labour. Toos & Plan etc required for proper completion of the work . |
| 134 | Painting (1st& 2nd ) coat over priming coat (but excluding cost of priming coat) on steel and other metal surface including cleaning the surface of all dirt, dust and other foreign matter ,sand papering and stopping including cost of material labour tool and plants etc as required for proper completion of work. Paint shall be used as per standard I.S. specification. (Paint used shall be of reputed brand an manufacturer such as Berger,J& N ,Shalimar ,Asian paint etc.) |
| 135 | Supply and Fixing CPVC pipe having thermal stability for hot & cold water including all CPVC plain and brass threaded fitting i/c fixing the pipe with clamps 1.0 m spacing. 20mm Dia. including cost of all material , Labour,T&P etc for proper completion of work. ( CPVC pipe used shall be of reputed brand and manufacturer such as ISI Mark Finolex, Supreme , Astral etc. equivalent Indian made brand) |
| 136 | Dismanteling & Laying 2.5 cm thick plain cement concrete (1:2:4) in flooring with cement , coarse sand & 2 cm. Graded approved stone grit without base concrete i/c cost of all material. Labour.T&P, lead & lifts with disposal , mechanical mixing etc. required for proper completion of work. |
| 137 | Laying Cement Conc. , M-20 (1:1.5:3) i/c cost of all material, Labour, T&P, Lead & Lifts with disposal, mechanical mixing etc required for proper completion of work . |
| 138 | Centering & shuttering for RCC work including cost of all material , Labour , T&P, Scaffolding as required etc. for proper completion of work . |
| 139 | Supply & fixing steel reinforcement (sail steel) for RCC work including cost of steel , cutting , Binding, Binding wire & Placing in postion including cost of all material , Labour,T&P etc for proper completion of work per Kg. |
| 140 | M.S./Iron work of small size and section such as MS Grills, gates, and other repairing works, including cost of all material, labour T&P etc complete in all respect. Per Qtl. |
| 141 | P/F cup board / almirah shutter with 25mm thich veneered particle board IS 3097 marked exterior grade I of approved make including IInd class teak wood lipping with necessary screw, bright finished fittings complete including cost of all material , Labour,T&P etc for proper completion of work. |
| 142 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge: For fixed portion ,Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including cost of all material , Labour,T&P etc for proper completion of work. (aluminium work for doors, windows, ventilators and partitions shall be of reputed make & manufacturer like Fenesta, Asahi ,Supreme etc.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender