Power Boards / Undertakings / PSU Closing in 10 days TDR #56597331

Tender For Construction Of Electrical Work Of 2X5 Mva 33/11 Kv Sub-Station At Village- Bhageena-Bhandari And One No 33 Kv Bay At 33 Kv Sub-Station Khetikhan (Ch Awat) Under The Head Of Capital (I.R.) Under Eswd, Kathgodam Haldwani. (Rates Should Be Q

Issued by Boards / Undertakings / PSU · Champawat, Uttarakhand
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Aug 2026
10 days left
EMD
2.46 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Champawat → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender for Construction Of Electrical Work Of 2X5 Mva 33/11 Kv Sub-Station At Village- Bhageena-Bhandari And One No 33 Kv Bay At 33 Kv Sub-Station Khetikhan (Ch Awat) Under The Head Of Capital (I.R.) Under Eswd, Kathgodam Haldwani. (Rates Should Be Quoted Without Gst) (Gst Will Paid Extra)

BOQ

Name of Work:- Construction of Electrical Work of 2x5 MVA 33/11 KV Sub-station at Village- Bhageena-Bhandari And One No 33 KV Bay at 33 KV Sub-station Khetikhan (Ch awat) under the head of Capital (I.R.) under ESWD, Kathgodam Haldwani. (Rates should be quoted without GST) (GST will paid extra)
Sl. No. Item Description
1Annexure-A (LABOUR CHARGES)
2CEMENT PLASTER WORK
3FABRICATION OF STRUCTURE
4CEMENT PLASTER WORK (ITEM 2)
5EXCAVATION IN SOIL IN HILLY AREA/RIVER BED BY MECHANICAL MEANS I.E. BACKHOE LOADER
6LAYING, SPREADING AND STRINGING BUS BAR CONDUCTOR BY ACSR PATH CONDUCTOR WITH MAKING ALL CONNECTIONS
7Jointing and fixing of cable jointing kit indoor/outdoor 11 KV XLPE heat shrinkable cable boxes
8LAYING OF 11 KV CABLE
9ERECTION OF 33 KV VCB
10PAINTING OF ISOLATOR/LA/CT/STRUCTURE COMPLETE
11FABRICATION OF STRUCTURE (ITEM 2)
12FENCING OF YARD
13Installation / Fixing of 33 Kv Isolator on structure at 33 Kv switchyard with proper alignment & Connections with busbar complete.
14PAINTING OF ISOLATOR/LA/CT/STRUCTURE COMPLETE (ITEM 2)
15CEMENT PLASTER WORK (ITEM 3)
16ERECTION OF LINE ISOLATOR STRUCTURE WITH INST.
17Grouting of structure in CC 1:3:6 in size (2x1.1x0.3x0.3) mtr.
18CEMENT PLASTER WORK (ITEM 4)
19Grouting of structure in CC 1:3:6 in size (2x1.1x0.3x0.3) mtr. (ITEM 2)
20RCC 1:1.5:3
21FABRICATION OF STRUCTURE (ITEM 3)
22Laying of MS bar 32 mm for making earth mat in switchyard area after fabrication / cutting in required size, laying at 2 mtr apart, also in crossing (Making Net), proper welding at each joint, laying at least 1 mtr depth in switchyard area
23BRICK WORK WITH COMMON BURNT CLAY BRICKS WITH CEMENT MORTAR 1:4
24FABRICATION OF STRUCTURE (ITEM 4)
25ERECTION OF STAY POST
26Erection of 11 KV VCB (O/G or B/C or I/C) Panel in all respect, making connection, testing etc in all respect at erection site
27FABRICATION OF STRUCTURE
28FIXING OF 33 KV LIGHTNING ARRESTOR
29Erection charges of structure
30CEMENT PLASTER WORK
31Grouting of structure in CC 1:3:6 in size (2x1.1x0.3x0.3) mtr.
32EXCAVATION IN SOIL IN HILLY AREA/RIVER BED BY MECHANICAL MEANS I.E. BACKHOE LOADER (ITEM A)
33EXCAVATION IN SOIL IN HILLY AREA/RIVER BED BY MECHANICAL MEANS I.E. BACKHOE LOADER (ITEM B)
34FIXING OF SODIUM/LED LIGHT AT YARD
35FABRICATION OF STRUCTURE (ITEM 2)
36EXCAVATION IN SOIL IN HILLY AREA/RIVER BED BY MECHANICAL MEANS I.E. BACKHOE LOADER (ITEM C)
37EXCAVATION IN SOIL IN HILLY AREA/RIVER BED BY MECHANICAL MEANS I.E. BACKHOE LOADER (ITEM D)
38ERECTION OF BUS GANTRY
39CEMENT PLASTER WORK (ITEM 2)
40Grouting of structure in CC 1:3:6 in size (2x1.1x0.3x0.3) mtr. (ITEM 2)
41Grouting of structure in CC 1:3:6 in size (2x1.1x0.3x0.3) mtr. (ITEM 3)
42PROVIDING AND LAYING IN POSITION CEMENT CONCRETE OF SPECIFIED GRADE EXCLUDING THE COST OF CENTERING AND SHUTTERING - ALL WORKS UPTO PLINTH LEVEL (I) 1:4:8 (1 - CEMENT; 4 - COARSE SAND; 8 - GRADED STONE AGGREGATE 40MM NOMINAL SIZE) FOUNDATION
43FABRICATION OF R.S. JOIST 175X85 SQ.MM.
44Erection of SP-10 single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESPO manual
45SUPPLY & ERECTION OF GRAVEL PITCHING OF SIZE 1/2\\" TO 3/4\\" (20X30X0.1)
46PAINTING OF 33 KV CT STRUCTURE
47PAINTING OF VCB PANELS (OUTER SURFACE AND INTERIOR LOWER)AREA WHERE VCB IS PLACED)
48EXCAVATION IN SOIL IN HILLY AREA/RIVER BED BY MECHANICAL MEANS I.E. BACKHOE LOADER (ITEM A)
49Grouting of structure in CC 1:3:6 in size (2x1.1x0.3x0.3) mtr. (ITEM A)
50Grouting of structure in CC 1:3:6 in size (2x1.1x0.3x0.3) mtr. (ITEM B)
51Earth filling under floor and in sub-station area including cost of earth. Earth to be obtained from outside the corporation area including its cartage and ramming, watering, dressing in 20 cm's thick layers including cost of earth with all lead and lift
52EXCAVATION IN SOIL IN HILLY AREA/RIVER BED BY MECHANICAL MEANS I.E. BACKHOE LOADER (ITEM B)
53ERECTION OF 33KV CONTROL PANEL (FEEDER/T/F)
54Cartage of the 33 KV VCB, feeder panels(O/D), T/F Control panel from store center to construction site with loading and unloading at both points. (Distance 0-20 Km)
55Erection charges of structure
56COMPLETE WIRING OF BREAKER BY PROVIDING FERULE ETC
57ERECTION OF FLEXIBLE CU. CONN. 500X50 MM
58MAKING CABLE TRENCH
59FABRICATION OF STRUCTURE (ITEM A)
60Erection of SP-33 double support pole in proper level and alignment along with fixing of all accessories like top channel, X bracings, & clamps as per RESPO manual
61EXCAVATION IN SOIL IN HILLY AREA/RIVER BED BY MECHANICAL MEANS I.E. BACKHOE LOADER (ITEM C)
62Painting of T.G. with one coat of Red oxide paint & 2 coats of Aluminum paints of best quality I.S.I. mark.
63CEMENT PLASTER WORK
64EXCAVATION IN SOIL IN HILLY AREA/RIVER BED BY MECHANICAL MEANS I.E. BACKHOE LOADER (ITEM D)
65FABRICATION OF STRUCTURE (ITEM B)
66FIXING OF ACCESSORIES
67Grouting of structure in CC 1:3:6 in size (2x1.1x0.3x0.3) mtr. (ITEM C)
68ERECTION OF TERMINAL GANTRY
69Earthing with two Nos. G.I earth plates 600mm x 600mm x 6mm thick (1.5)meter minimum in between distance)including accessories and p rovidingdouble masonry enclosure with coverplate having locking arrangement andwatering pipe of 3 meter long etc. With
70Erection charges of structure
71EARTHING OF STRUCTURE USING GI STRIP (ITEM A)
72PROVIDING AND LAYING IN POSITION CEMENT CONCRETE OF SPECIFIED GRADE EXCLUDING THE COST OF CENTERING AND SHUTTERING - ALL WORKS UPTO PLINTH LEVEL (I) 1:4:8 (1 - CEMENT; 4 - COARSE SAND; 8 - GRADED STONE AGGREGATE 40MM NOMINAL SIZE) FOUNDATION (ITEM A)
73CEMENT PLASTER WORK (ITEM A)
74CEMENT PLASTER WORK (ITEM B)
75BRICK WORK WITH COMMON BURNT CLAY BRICKS WITH CEMENT MORTAR 1:4
76PROVIDING AND LAYING IN POSITION CEMENT CONCRETE OF SPECIFIED GRADE EXCLUDING THE COST OF CENTERING AND SHUTTERING - (I) 1:2:4 (1 CEMENT; 2 - COARSE SAND; 4 - GRADED STONE AGGREGATE 20MM NOMINAL SIZE) ROAD REPAIRING / OTHER WORK
77RR masonry work in 1:6 ratio
78PROVIDING AND LAYING IN POSITION CEMENT CONCRETE OF SPECIFIED GRADE EXCLUDING THE COST OF CENTERING AND SHUTTERING - ALL WORKS UPTO PLINTH LEVEL (I) 1:4:8 (1 - CEMENT; 4 - COARSE SAND; 8 - GRADED STONE AGGREGATE 40MM NOMINAL SIZE) FOUNDATION (ITEM B)
79Erection of SP-33 double support pole in proper level and alignment along with fixing of all accessories like top channel, X bracings, & clamps as per RESPO manual
80EARTHING OF STRUCTURE USING GI STRIP (ITEM B)
81ERECTION OF 24 VOLT BATTERY SET
82CEMENT PLASTER WORK (ITEM C)
83EARTHING OF STRUCTURE USING GI STRIP (ITEM C)
84Installation / Fixing of 33 Kv Isolator on structure at 33 Kv switchyard with proper alignment & Connections with busbar complete.
85CEMENT PLASTER WORK (ITEM A)
86CEMENT PLASTER WORK (ITEM B)
87Erection of cable stand neutral stand including fabrication cutting and welding work.
88EXCAVATION IN SOIL IN HILLY AREA/RIVER BED BY MECHANICAL MEANS I.E. BACKHOE LOADER (ITEM A)
89ERECTION OF 33/0.433KV S/S TRANSFORMER
90PAINTING OF DOUBLE POLE (SP-33)
91FABRICATION OF STRUCTURE
92Laying and erection of L.T. PVC single lead Cable including crimping of lugs of size 1x240, 400, 630 Sq.mm etc. (Including all cost of material)
93EXCAVATION IN SOIL IN HILLY AREA/RIVER BED BY MECHANICAL MEANS I.E. BACKHOE LOADER (ITEM B)
94BRICK WORK WITH COMMON BURNT CLAY BRICKS WITH CEMENT MORTAR 1:4
95TESTING OF TRANSFORMER / VCB / PANEL
96PAINTING OF ISOLATOR/LA/CT/STRUCTURE COMPLETE (ITEM A)
97FIXING OF 33 KV FUSE SET
98Cartage of 5/8 MVA Power transformer by road (loading/unloading/shifting to be charged extra) (151-200 KM)
99EXCAVATION IN SOIL IN HILLY AREA/RIVER BED BY MECHANICAL MEANS I.E. BACKHOE LOADER (ITEM C)
100Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends (distance 151-200 Km)
101PAINTING OF ISOLATOR/LA/CT/STRUCTURE COMPLETE (ITEM B)
102INSTALLATION OF FIRE EXTINGUISHERS
103PROVIDING AND LAYING IN POSITION CEMENT CONCRETE OF SPECIFIED GRADE EXCLUDING THE COST OF CENTERING AND SHUTTERING - ALL WORKS UPTO PLINTH LEVEL (I) 1:4:8 (1 - CEMENT; 4 - COARSE SAND; 8 - GRADED STONE AGGREGATE 40MM) NOMINAL SIZE).( FOUNDATION
104PROVIDING AND LAYING IN POSITION CEMENT CONCRETE OF SPECIFIED GRADE EXCLUDING THE COST OF CENTERING AND SHUTTERING - ALL WORKS UPTO PLINTH LEVEL (I) 1:4:8 (1 - CEMENT; 4 - COARSE SAND; 8 - GRADED STONE AGGREGATE 40MM NOMINAL SIZE) FOUNDATION
105Erection charges of structure
106Digging of trench of size 0.60x0.15x1.5 mtr. and laying of underground 33 KV XLPE cable with making of brick housing and filling of sand including filling of earth with ramming & repairing of road including cost of cement sand and stone blast
107STEEL (REINFORCEMENT)
108ERECTION OF 24 VOLT BATTERY CHARGER
109ERECTION OF SUB-STATION NAMED BOARD
110ERECTION OF NAME PLATES
111INSTALLATION OF DCDB COMPLETE ON SURFACE OR WALL WITH THE HELP OF WALL ANCHOR BOLT FASTENERS 4 NOS. COMPLETE TESTING AND COMMISSIONING OF DCDB AS PER SITE REQUIREMENT AND NARRATED BY ENGINEER IN CHARGE OF THE WORK
112INSTALLATION OF ACDB COMPLETE ON SURFACE OR WALL WITH THE HELP OF WALL ANCHOR BOLT FASTENERS 4 NOS. COMPLETE TESTING AND COMMISSIONING OF ACDB AS PER SITE REQUIREMENT AND NARRATED BY ENGINEER IN CHARGE OF THE WORK
113Jointing and fixing of cable jointing kit indoor/outdoor 33 KV XLPE heat shrinkable cable boxes
114FIXING OF 33 KV LINE ISOLATOR VERTICAL TYPE ON ST POLE
115ERECTION OF BUS BAR
116FABRICATION OF STRUCTURE (ITEM A)
117SHIFTING OF 5 MVA T/F
118FABRICATION OF STRUCTURE (ITEM B)
119Erection of (8.5) MVA T/F at transformer plinth & erection of all accessories i.e. radiators, conservator tank, vent pipe etc., with the help of special type of T&P / crane etc. fitting cable etc. and refilling the fresh oil inradiator and conservator
120FIXING OF 33 KV FUSE SET
121PROVIDING AND LAYING IN POSITION CEMENT CONCRETE OF SPECIFIED GRADE EXCLUDING THE COST OF CENTERING AND SHUTTERING - (I) 1:2:4 (1 CEMENT; 2 - COARSE SAND; 4 - GRADED STONE AGGREGATE 20MM NOMINAL SIZE) ROAD REPAIRING / OTHER WORK
122PROVIDING AND LAYING IN POSITION CEMENT CONCRETE OF SPECIFIED GRADE EXCLUDING THE COST OF CENTERING AND SHUTTERING - ALL WORKS UPTO PLINTH LEVEL (I) 1:4:8 (1 - CEMENT; 4 - COARSE SAND; 8 - GRADED STONE AGGREGATE 40MM NOMINAL SIZE) FOUNDATION
123PAINTING OF BUS GANTRY
124FABRICATION OF STRUCTURE
125Erection charges of structure
126FIXING AND ERECTION OF 33 KV OUTDOOR PT
127Laying of Control cable of all sizes through trench, proper connection at both ends outside in switchyard equipments & inside control room in VCB, control & relay Panels with proper marking, lugs, labelling & ferrules etc
128EXCAVATION IN SOIL IN HILLY AREA/RIVER BED BY MECHANICAL MEANS I.E. BACKHOE LOADER (ITEM A)
129EXCAVATION IN SOIL IN HILLY AREA/RIVER BED BY MECHANICAL MEANS I.E. BACKHOE LOADER (ITEM B)
130PAINTING OF FUSE SET STRUCTURE
131ERECTION OF T&P ITEMS
132Fabrication of MS Channel angle iron etc in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc. as per RESPO schedule and local approved drawing.
133ERECTION OF TERMINAL GANTRY
134MAKING CABLE TRENCH
135Painting of T.G. with one coat of Red oxide paint & 2 coats of Aluminum paints of best quality I.S.I. mark.
136Installation of 33 KV CT with all connections
137COMPLETE WIRING OF BREAKER BY PROVIDING FERULE ETC
138PAINTING OF ISOLATOR/LA/CT/STRUCTURE COMPLETE
139FIXING OF 33 KV LIGHTNING ARRESTOR
140ERECTION OF LINE ISOLATOR STRUCTURE WITH INST.
141LAYING, SPREADING AND STRINGING BUS BAR CONDUCTOR BY ACSR PATH CONDUCTOR WITH MAKING ALL CONNECTIONS
142Erection charges of structure
143EARTHING OF STRUCTURE USING GI STRIP
144ERECTION OF 33KV CONTROL PANEL (FEEDER/T/F)
145Installation / Fixing of 33 Kv Isolator on structure at 33 Kv switchyard with proper alignment & Connections with busbar complete.
146ERECTION OF 33 KV VCB
147Laying of Control cable of all sizes through trench, proper connection at both ends outside in switchyard equipments & inside control room in VCB, control & relay Panels with proper marking, lugs, labelling & ferrules etc
148Miscellaneous Charges for civil work
149Annexure-B (SUPPLY ITEMS) (As per UPCL Norms)
150MEGGAR 5 KV DIGITAL
1512.5 KV MEGGAR DIGITAL
152MAXIMUM & MINIMUM DISPLAY BOARD
153STEEL ALMIRAH
154FIRE EXTINGUISHER ABC TYPE 5KG
155PORTABLE FOAM TYPE FIRE EXTINGUISHER 5LT
15611 KV H/S JOINTING KIT 185 SQ MM (O/D)
157WIRE MESH FENCING
158OFFICE TABLE SIZE (4X2.5)
159SUB STATION NAMED BOARD
160EARTH MEGGAR DIGITAL
161STEEL OFFICE CHAIR GODREJ
162SINGLE LINE DIAGRAM BOARD
16390 WATT LED LIGHT WITH ACC.
164G.I STRIP 35X5MM
165STEEL OFFICE TABLE
166EARTH CHAIN
167D-SPANNER SET
168NAME PLATE OF EQUIP. TG,LI,BI,CT,CB ECT.
169CEILING FAN
170FLEXIBLE COOPER CONNECTOR 50X50MM
171INSTRUCTION BOARD
17211 KV H/S JOINTING KIT 185 SQ MM (I/D)
173PG CLAMP FOR DOG CONDUCTOR
174STAY CLAMP FOR SP-33 WITH NUT & BOLT
175INSULATED ELECTRICAL PLIER TAPARIA
176BOLT AND NUT 180X16 MM
17733/0.433 KV, 63 KVA STATION TRANSFORMER
1783X70 SQ MM XLPE 33 KV CABLE-D
179ST. LIGHT MANAG. TIMER SWITCH WITH METER
180DB I/C MCB 30A-1 NO. & OG MCB 10A-10NOS.
181DCDB 24V
182STEEL CABINET
183MS BAR 10MM
184SUNDRIES ITEM LUG GLAND ETC
185GI PIPE 4\\" DIA
186PIPE WRENCH 12''
187TOP CHANNEL CLAMP FOR SP-33 WITH N&B
188GI PIPE 4\\" DIA (ITEM 2)
189MS PLATE 225X225X8MM
190MS PLATE 225X225X8MM (ITEM 2)
191MS PLATE 225X225X8MM (ITEM 3)
192PERFORATED TRAY 400MM FOR CABLE TRENCH
193M.S.PLATE 400X400X8 MM
194STONE PAD 300X300X75MM
195STONE PAD 300X300X75MM (ITEM 2)
196STONE PAD 300X300X75MM (ITEM 3)
197WALL CLOCK
198LED TORCH WITH ELECTRIC CHARGING
199STONE PAD 300X300X75MM (ITEM 4)
200MS BAR 12MM DIA FOR STEEL REINFORCEMENT
201SAFETY CHART
20224 V BATTERY SET
20333 KV HAND GLOVES
204DOOR MAT
205DUSTBIN PLASTIC SIZE (SMALL)
206FIRST AID BOX
207R.S. JOIST 175X85MM
208MS ANGLE 40X40X5 MM
209MS ANGLE 40X40X5 MM (ITEM 2)
210RAIL 90 LBS
211RUBBER MAT (INSULATED) 1MX1MX3MM
212FIRE BUCKET STAND WITH BUCKETS
213GI STRIP 50X6 MM
214G.I EARTH STRIP 65X6MM
215WALL FAN
216M.S.PLATE 400X400X8 MM
217CONNECTORS FOR FUSE SUITABLE FOR PANTHER
218PG CLAMP ACSR PANTHER TO ACSR DOG
219NAME PLATE OF FEEDER
22011KV DANGER BOARD WITH CLAMP
221DANGER BOARD
222SHUT DOWN/ BREAK DOWN BOARD
223PERFORATED TRAY 200MM FOR CABLE TRENCH
224PERFORATED TRAY 100MM FOR CABLE TRENCH
225NAME PLATE OF STATION T/F
226ALUMINIUM LUG
22733 KV DANGER BOARD WITH CLAMP
228BRACING CLAMP FOR ST POLE WITH N&B
229TOP CHANNEL CLAMP FOR SP-33 WITH N&B
230BOLT & NUTS OFF SIZE (ITEM 1)
231BOLT & NUTS OFF SIZE (ITEM 2)
232BOLT & NUTS OFF SIZE (ITEM 3)
233BOLT & NUTS OFF SIZE (ITEM 4)
234BOLT & NUTS OFF SIZE (ITEM 5)
235BOLT & NUTS OFF SIZE (ITEM 6)
236BOLT & NUTS OFF SIZE (ITEM 7)
237BOLT & NUTS OFF SIZE (ITEM 8)
238BOLT & NUTS OFF SIZE (ITEM 9)
239BOLT & NUTS OFF SIZE (ITEM 10)
240T CONNECTOR
241PG CLAMP ALU ALLOY PANTHER TO PANTHER
24224V BATTERY CHARGER
243CONNECTOR SUITABLE PANTHER FOR VCB
24411 KV FUSE SET
24511KV 3P(400A) 3PIN VERT. MOUNT GO AB TPMO
246PG CLAMP ALU ALLOY PANTHER TO DOG
247CONNECTOR OF POWER T/F LV SIDE
248PG CLAMP FOR PANTHER TO PANTHER
249STONE PAD 300X300X75MM
25033KV ISOLATOR CONN. CLAMP FOR PANTHER, N&B
251CONNECTOR SUITABLE FOR PANTHER FOR LA
252CONNECTOR SUIT FOR CT/PT FOR PANTHER/DOG
253MS PLATE 400X400X8MM
254CONNECTOR SUITABLE PANTHER FOR VCB
255MS PLATE 225X225X8MM
256MS NUT & BOLT OFF SIZE
257T CONNECTOR
258GI STRIP 50X6 MM Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56597331
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 06-08-2026
Authority
Authority Name Uttarakhand Power Corporation Limited
Work Description Tender for Construction Of Electrical Work Of 2X5 Mva 33/11 Kv Sub-Station At Village- Bhageena-Bhandari And One No 33 Kv Bay At 33 Kv Sub-Station Khetikhan (Ch Awat) Under The Head Of Capital (I.R.) Under Eswd, Kathgodam Haldwani. (Rates Should Be Quoted Without Gst) (Gst Will Paid Extra)
Basic Detail
Tender No ESWC(H)/06/2026-2027
Bidding Type Tender
Location
City Champawat
State Uttarakhand
Key Dates
Publish Date 22 Jul 2026
Submission Date 06 Aug 2026
Open Date 07 Aug 2026
Finance
Tender Value Ref. Documents
Tender Fee 11800
EMD 2.46 Lakhs
Exemption Not Available
Document List
787e3a1e-f01a-44ed-a19e-449cd5552945.html
BOQ_115606.xls
FormAandB.pdf
generalcondition06.pdf
tenderdocumentss06.pdf
Tendernotice_1 (17).pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 22, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 06, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Aug 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

787e3a1e-f01a-44ed-a19e-449cd5552945.html

xls

BOQ_115606.xls

pdf

FormAandB.pdf

pdf

generalcondition06.pdf

pdf

tenderdocumentss06.pdf

pdf

Tendernotice_1 (17).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders