Tender For Repair, Maintenance And Complete Denting & Painting With Allied Work Of Vehicle No. Dl 1Gc (7540, 7622 And 7532) Tata Lpt 1613 At Dems Department Under North Zone.
Tender Value
11.12 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
6 days left
EMD
23350
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair, Maintenance And Complete Denting & Painting With Allied Work Of Vehicle No. Dl 1Gc (7540, 7622 And 7532) Tata Lpt 1613 At Dems Department Under North Zone.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and replacement engine oil with CH4 Plus oil |
| 2 | Supply and filling redicool coolant 1 Liter |
| 3 | Supply and fixing steering oil (Castorl TQ) . |
| 4 | Supply and filling brake fluid (DOT-04)-500 ML |
| 5 | Supply of cleaning material |
| 6 | Supply and fixing of One number of Battery 12-volt, 150 Ah. |
| 7 | Supply and replacement of Tyre having size 10.00-20 (Front) which confirming having 16 ply rating including tyre alignment |
| 8 | Supply and replacement of Tyre having size 10.00-20 (Rear) which confirming having 16 ply rating including tyre alignment |
| 9 | Complete repair of rear Dalla along with floor, three side Dalla, shall be denting and remove the worn out portion of Dalla floor by the gas welding, and patches with MS iron sheet, replace the broken Dalla foundation U bolt and mounting pads, replace of all damage/ broken Dalla hook, chain and locking sys, After completing the denting job of Dalla the welding portion shall be fill up by putty and finish by the wet type of emery paper, the complete body (Dalla) shall coat by primer and paint by the green synthetic enamel paint through spraying method. |
| 10 | Complete denting and painting of cabin body by removing the dented area and repair the damage area by spot welding and patching the new piece of mild steel sheet and painting entire cabin by synthetic enamel paint through spray painting. |
| 11 | Complete servicing & replacement of faulty alternator assy parts and replacement worn out wiring male female coupling, Head light bulb, tail light bulb and complete work up to satisfaction of Engineering - incharge with testing at idle and full load condition. |
| 12 | Complete washing of chassis frame and wheel rim for removing the rust/ dusting area. After washing of chassis and wheel rim shall be coated with primer and painting the complete chassis frame and wheel rim with black enamel paint |
| 13 | Complete servicing and tuning of four cylinder, inline, water cooled, four stroke, over head cam, turbo charger, self ignition sys, multifuel injection sys, diesel engine and replacement of air filter, oil filter, diesel filter, etc. after servicing of engine the complete engine shall be tunned and setted for idle and full load condition |
| 14 | Dismantling of clutch system assembly & replacement of SRGD bearing, clutch release brg with hub, clutch Cylinder, fly wheel ring and refitted in vehicle with bleeding the complete clutch sys and testing complete clutch system up to satisfaction of Engineering- in- Charge with complete work as required. |
| 15 | Complete self starter assy shall be removed from the vehicle and overhaul by the replacing of required parts like bush set, self solonoid switch, carbon bush, self plate, and rewinding the one no field coil. After repair of self starter assy refitting it into the vehicle and test it on idle and full operating termp of engine including labour charges. |
| 16 | Complete opening of power strg sys and replace of oil seal, drop arm, knuckle arm, hydraulic bottle, hydraulic fluid, pipe from hydraulic bottle to strg sys. Complete power strg gear box cleaning and reassembling with all required parts. The strg power assy refitted in the vehicle and Top up the hydraulic fluid with bleeding the complete sys and setting the RHS & LHS turning of wheels by the measuring of toe in toe out with the help of wheel balancing machine. |
| 17 | Complete opening of four wheel brake sys and replace of retensioning spring, brake rachet, RHS rear brake arm, front both side wheel brake chamber rubber, with setting of all four brake sys and opening with cleaning of air chamber and replace of air drain valve. After repairing of brake sys refitting the all the brake parts in the vehicle and check the vehicle at idle and full load condition by taking the road test of vehicle. |
| 18 | Replacement of silencer by cutting and welding with patches by new piece through gas welding with complete work as required |
| 19 | Replacement side glass door handle with complete work as required. |
| 20 | Mudgaurd need to be repair by cutting, welding and repairing by spot welding and patching the new piece of mild steel sheet. With complete work. |
| 21 | Provide and fixing of front bumper with complete work required. |
| 22 | S&F SUPD (side under protection gard) |
| 23 | Complete vehicles shall be washing and greasing of all wheels. |
| 24 | Complete radiator cleaning and servicing work to be carried out as if there is any leakage thorough means of welding up to satisfaction of Engineer - incharge. |
| 25 | Complete O/H of front and rear suspension sys by opening dismantling the leaf spring and re tensing as per requirement. 4 Replace of U bolt, V clamp, Center bolt, shackle pin and replace of helper spring parts with re tensioning and refitting the all front and rear suspension sys. |
| 26 | Labour charges for Anti-Rust Underbody Coating etc. as required Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender