Tender For Rendering Day To Day Repair And Maintenance Of Carpentary Works For Bsnl Buildings & Staff Quarters Under Jurisdiction Of Civil Sub-Division-I, Jaipur.
Tender Value
5.17 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
3 days left
EMD
10354
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rendering Day To Day Repair And Maintenance Of Carpentary Works For Bsnl Buildings & Staff Quarters Under Jurisdiction Of Civil Sub-Division-I, Jaipur.
BOQ
| Sl. No. | Item Description |
| 1 | Attending all day to day maintenance complaints of carpentry works complete excluding the cost of materials but including cost of washers, nails, clamps, screws ,drill machine,bit etc and for all lead & lift etc as per direction of Engineer-in-Charge. The material required for maintenance shall be arranged at site by the agency and will be paid separately. For the purpose of attending day to day complaints, one assistant carpentor should be available daily and one log book has to be maintained by the staff of contractor duly verified by SDO/JTO(Civil) on daily basis as a proof of attending complaints. (One job will be defined / consists execution of all above items for all required / working days in a month). Cost of all T&P like washers, nails, clamps, screws,feviquick ,fevicol,drill machine,bit etc ladder etc for attending the work, shall be arranged by the contractor and nothing extra shall be paid separately.The material required for attending the complaints shall be arranged by the contractor at site and paid under sub head of \\"supply of material \\" of the agreement. |
| 2 | Engaging helper for attending day to day maintenance jobs for /carpentry & all other works related to day to day maintenance.( One job will be defined/ consists execution of all items for the working days as well as on holydays as & when required in a month),All T&P like washers, nails, clamps, screws,feviquick ,fevicol,drill machine,bit etc ladder etc for attending the work, shall be arranged by the contractor and nothing extra shall be paid separately.The material required for attending the complaints shall be arranged by the contractor at site and paid under sub head of \\"supply of material \\" of the agreement. |
| 3 | Supplying of ISI marked flush door shutters non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of shutters. |
| 4 | 30 mm thick. |
| 5 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) |
| 6 | Kiln seasoned and chemically treated hollock wood |
| 7 | 30 mm thick shutters |
| 8 | Providing and supplying panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. |
| 9 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading |
| 10 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. |
| 11 | Kiln seasoned and chemically treated hollock wood |
| 12 | 30 mm thick |
| 13 | Providing wood work in frames of doors/Windows and, clear story window other frames, wrought framed and fixed in position including cost of all nails, screws etc but exluding labour cost for fixing. |
| 14 | Kiln seasoned and chemically treated Hollock wood/ Hard wood |
| 15 | Refixing old glass panes with putty and nails . |
| 16 | MISCELLANEOUS BUILDING WORKSStructural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 17 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 18 | For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 19 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 20 | SUPPLY OF MATERIALProviding / supplying and fixing following anodised aluminum fittings with nail, screws etc where ever required but excluding labour cost. |
| 21 | Aluminium sheet |
| 22 | Anodised aluminium Sliding door bolt 250 x 16 mm |
| 23 | Anodised aluminium Tower bolt 200 x 10 mm |
| 24 | Anodised aluminium Handles 125 mm |
| 25 | Aluminium hanging floor door stopper with twin rubber & stopper |
| 26 | Hydraulic door closer TUBULAR design type, Aluminium section body (ISI Mark) |
| 27 | Double action floor door spring for aluminium doors with stainless steel cover plate ISI marked best quality |
| 28 | Providing / supplying and fixing following MS black / bright finished fittings with nail, screws etc where ever required but excluding labour cost. |
| 29 | Handles 100 mm |
| 30 | Hasps and staples (safety type) 115 mm |
| 31 | Butt Hinges 100 x 58 x 1.90 mm |
| 32 | Butt Hinges 75 x 47 x 1.70 mm |
| 33 | Nickel plated M.S. pipe curtain rod 20 mm dia not less than 1.00 mm thickness with M.S. bracket if required |
| 34 | M.S. Wire gauge of 0.56 mm dia for renewing of wire gauge of doors & windows including new wooden beading of required size if required as per site condition |
| 35 | M.S. oxidised single acting spring hinge with screws. |
| 36 | Sliding door bolts 300 x 16 mm |
| 37 | Sliding door bolts 250 x 16 mm |
| 38 | Tower bolts (barrel type) oxidized mild steel 250 x 10 mm |
| 39 | Tower bolts (barrel type) oxidized mild steel 150 x 10 mm |
| 40 | M.S. Handle (fastener) for steel windows including bolts and nuts and washer 150 mm |
| 41 | Expandable fastener of specified size32 mm long |
| 42 | Expandable fastener of specified size 50 mm long |
| 43 | Providing / supplying and fixing panelling to doors & windows with nail, screws, adhessive etc where ever required but excluding labour cost. |
| 44 | 12 mm thick BWP commercial ply on both faces. |
| 45 | 6 mm thick BWP commercial ply on both faces. |
| 46 | Providing / supplying and fixing wooden boards in shelves, counters, drawers, wall panelling etc with nail, screws, adhessive, lipping as directedby Engineer in charge etc where ever required but excluding labour cost. |
| 47 | 12 mm thick flat pressed 3 layer and grade I, type II confirming to IS:12833 (Exterior grade prelaminated particle board with both side decorative lamination . |
| 48 | 5 mm thick(float glass) glazing in aluminium door,window,ventilator with EPDM rubber/neoprene gasket. |
| 49 | Providing / supplying and fixing of 1.00 mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 204 |
| 50 | Providing / supplying and fixing furniture fittings catcher, pivot, lock etc to drawers, counters, tables almirah etc with nail, screws, adhessive etc where ever required but excluding labour cost. |
| 51 | Magnetic catcher double strip horizontal type |
| 52 | Telescopic drawer channel 300mm long |
| 53 | Providing and fixing 2nd class teak wood lipping / moulded beading of size 20mmX5mm fixed with wooden adhesive of approved quality and screws /nails as per direction of Engineer-in-charge but excluding cost of labour. |
| 54 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 55 | Two or more coats on new work. |
| 56 | Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws. |
| 57 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 58 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 59 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. |
| 60 | Using M.S. angels 40x40x6 mm for diagonal braces |
| 61 | Providing and fixing bright finished brass handles with screws etc. complete: |
| 62 | 100 mm |
| 63 | Credit of materials / items obtained from dismantling being unserviceable. |
| 64 | MS fittings for doors & windows like SDB, TB, Handle, Hinges etc |
| 65 | Aluminium fittings for doors & windows like SDB, TB, Handle, hinges etc. |
| 66 | Hydrolic door closer, hydraulic floor springs |
| 67 | 12 mm thick prelaminated particle board with both side decorative lamination . |
| 68 | 5 mm thick float glass panes |
| 69 | Anodised aluminium section |
| 70 | Credit of wooden door/ windows shutter i/c fittings obtained by dismantling etc. and disposal of unserviceable material within 50 m lead etc. of area up to 2.50sqm. |
| 71 | Repairing of doors and windows (Steel / wood/aluminium/pvc) at site with welding of hinges, sawing and repairing edges etc. and repairing of sides & jambs if required for their smooth functioning etc as directed by Engineer-in-charge. All T&P nails etc required for attending the work shall be arranged by the contractor and nothing extra shall be paid for. |
| 72 | Supplying plain/ float glass panes of nominal thickness 3.70 mm. |
| 73 | Repairing of windows grill, railing etc by welding with Electric plant / gas plant including transportation of welding plant at site & other required T&P is to be arranged by Agency. MS sections shall be paid for separately. |
| 74 | Providing / supplying and fixing following MS oxidised fittings with nail, screws etc where ever required but excluding labour cost. |
| 75 | 18 mm thick block board (BWP type ISI marked) including lipping and beading on exposed face. |
| 76 | Providing/ supplying samosa saprig for main door operation smooth |
| 77 | Refabrication and fixing aluminium /wooden /pvc partitionsd and doors,windows from the available departmental material including cost of cutting the material to requrired size and carriage to site in the campus ,providing pivot ,fixing all components and fitting as direction of engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender