Tender For Stbt To Road At Kandoshi Vr 116 Tal Khed Dist Ratngiri
Tender Value
21.02 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
4 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ratnagiri → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Stbt To Road At Kandoshi Vr 116 Tal Khed Dist Ratngiri
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for catch / side water gutter in Hard murum and boulder strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed. |
| 2 | Supplying trap/granite/quartzite/gneiss stonemetal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex.Engineer is necessary the date of approval will form part of the measurements) a) 40 mm Metal,By breaking Boulders (Hand broken) |
| 3 | Spreading 80/40 mm metal for road worki ncluding section on get ccomplete as directed by Engineer in charge . |
| 4 | Sprading hard murum/soft murum/gravel or kankar for side width complete |
| 5 | Compacting the sub grade /gravel /ove rsize metal (100 mm loose) layers for al lwidth with Vibratory roller having weight 8 to10MT. Including necessary, labour,materials and artificial watering complete. |
| 6 | Providing and constructing 50mm. thick Modified Penetration Macadam (MPM) road surface including all materials,preparing the existing road surface,spreading 40mm.stone layers metal 100% crusher broken metal with conical crusher palnt ,heating and spraying the bitumen of specified grade @1.75kg /sqm, spreading 12mm. size chips compacting with Static roller having weight 8 to10 MT.to achive the desired degree of compaction as perTechnical Specification Clause 506 etc.complete, i. Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates) |
| 7 | Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 8 | Providing 20mm thick premix bituminous crapet including supplying all materials preparing and clearing the base heating bitumen applying tack coat at specificed rate miling hot bitumin and chipas laying the carpet layer and compacting etc complete etc complete |
| 9 | Providing bituminous Type A liquid seal coat on bituminous surface including supplying all material sand bitumen of specified grade preparing existing road surface,heating and applying bitumen @0.98 Kg Sqm.by mechanical means, spreading chip sand rolling,by static roller having weight 8 to10MT. etc. complete. (VG-30bulkbitumenrates are considered to arrive at rates) |
| 10 | Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 6000mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 11 | Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Route Marker with Engineering Grade |
| 12 | Test of Aggregate (gradation) Sieve |
| 13 | Test of Bitumen Extraction |
| 14 | Bitumen 40 Penetration softening point flash and fire point specific Gravtiy |
| 15 | RoaytlyCharges Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender