Tender For Construction Of Yoga/Meditation Centre At Kalimpong Mil Stn Under Ge 867 Ews
Tender Value
40.80 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
19 days left
EMD
81600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kalimpong → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Yoga/Meditation Centre At Kalimpong Mil Stn Under Ge 867 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil. |
| 2 | M&L for excavation in trenches, not exc 1.5 m wide and not exc 1.5 m depth for foundation, etc, and get out in hard/dense soil. |
| 3 | M&L Cement concrete in foundations type D2 1:4:8 using 40 mm graded stone in foundations, filling and mass concrete complete all as specified and directed. |
| 4 | Returns, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soils or hard/ Dense soil. |
| 5 | M&L removing excavated material exc. 250 m but n exc. 500 m and depositing where directed by Engr-in-Charge. |
| 6 | M & L for Reinforced cement concrete (Nominal mix) Type B0 (1:2:4) (12.5 mm graded aggregate) as in Foundation,incl raft,footing,foundation beam,plinth beam,base for columns and mass concrete complete all as specified and directed. |
| 7 | M & L for Reinforced cement concrete (Nominal mix) Type B0 (1:2:4) ( 12.5 mm graded aggregate) as in beams, cantelivers, bressmers, lintel over 1.5m span complete all as specified and directed. |
| 8 | M & L for Reinforced cement concrete (Nominal mix) Type B0 (1:2:4) (12.5 mm graded aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 9 | M & L for Reinforced cement concrete (Nominal mix) Type B0 (1:2:4) (12.5 mm graded aggregate) as in chajjas complete all as specified and directed. |
| 10 | M & L for form work to sides of concrete foundations, footing, bases of columns raft and raft beams, side of soffits ( if any) of foundation and plinth beams and similar work; vertical or to batter, rough finished surface of concrete flat complete all as specified. |
| 11 | M & L for Form work to sides and soffit of floor or roof beams,beam haunching,girders etc. in flat rough finished surfaces of concrete complete all as specified and directed. |
| 12 | M & L for Form work to sides of pillars, posts, struts, piers, columns and stanchions of square rectangular or poligonal rough finished surfaces of concrete complete all as specified and directed. |
| 13 | S&F for Formwork to chullah hoods, chajjas, troughs and similar items including edges on flat concrete surface complete all as specified and directed. |
| 14 | S&F TMT bars Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 15 | All as per item no 15. above here in above 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 16 | M&L brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 17 | M&L Rendering in cement mortar (1:6) 10 mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L Rendering in cement mortar (1:4) 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | Supply only integral water proofing compond all as specified and as directed. |
| 20 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 21 | M &L Filling under floor spreading leveling well ramming and including waterring in requid in layers n. exc 25 cm thick complete all as specified and directed. |
| 22 | M&L broken stone or boulder hard core of gauge exc 63mm but not exc 100mm, deposited spread and levelled n.exc 15 cm thick, waterd and rammed to a true surface complete all as specified and directed. |
| 23 | M&L for 75 mm thick Cement concrete type C-2, (1:3:6) (using 40 mm graded granite stone aggregate) in sub base of flooring complete all as specified and directed. |
| 24 | M &L 75 mm thick Cement concrete type C-2, (1:3:6) (using 40 mm graded granite stone aggregate) in plinth protection complete all as specified and directed. |
| 25 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 26 | M&L 350x 250x 7 mm or 450X 350X 7mm thick coloured glazed ceramic tiles fixed as in vertical surface such as risers of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over complete all as specified and directed. |
| 27 | M&L for vitrified cremic tiles 10 mm thick light shade (square/ rectangular) polished ,area of each tile n.exc 0.36 sqm in vertical surface etc set and jointed in neat cement slurry and pointing in white or coloured cement to match complete all as directed and specified. |
| 28 | M&L for vitrified cremic tiles 10 mm thick light shade (square /rectangular) polished ,area of each tile exc 0.42 sqm but n.exc 1.00 sqm in floor etc set and jointed in neat cement slurry and pointing in white or coloured cement to match the coloure of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as directed and specified. |
| 29 | S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed. |
| 30 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment incl necessary cutting/ notching/ drilling rivertting/ welding or connecting with bolts or nuts (Fe 410-W Gde E-250 Quality A) complete all as directed. |
| 31 | S&F mild steel bolts exc 20 mm n.exc 25 mm diameter of neck purpose made with hexagonal or square head one end and screwed the other, or screw both end each screw end to be fitted with washers and one hexagonal or squre nut exc 15 cm complete all as directed. |
| 32 | M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as directed. |
| 33 | M&L For pre-painted Galvalume aluminium Zinc cooating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 mpa as in roof covering,ridges fixed with self tapping screws all as specified and directed. |
| 34 | M&L For pre-painted Galvalume aluminium Zinc cooating GI based Plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 mpa as in roof covering,ridges fixed with self tapping screws all as specified and directed. |
| 35 | S&F GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.5mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed. |
| 36 | S&F Hangers 2mm G.I. (upto 1200 mm length adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and directed. |
| 37 | M&L non asbestos fibre cement building board 600x 600 mm and 4 mm thick fixed or laid in ceiling inserted to GI/Aluminium framework with screws complete all as specified and directed. |
| 38 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed. |
| 39 | S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed. |
| 40 | S&F Vitrous china wash down water closet pan pedestal pattern white, exlcuding fixing bolts, flushing cistem & Flush pipe including PVC Seat Cover white recess bottom type mild steel chromium plated or aluminium hanging device complete all as specified and directed. |
| 41 | S&F of PVC low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required. |
| 42 | S & F vitreous china wash hand basin of size 550mm x 450mm, incl fixing to wall with brackets, 32 mm waste coupling half or full threaded,PVC flexible waste pipe 32mm dia brass chromium plated waste fitings, 15mm dia PVC connecting pipe incl 15mm dia pillar tap cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks fly nuts complete all as directed and specified. |
| 43 | S&F in 15 mm bore PVC connection 450 mm long with two brass chromium plated brass nuts and PVC washers complete all as specified and directed. |
| 44 | S&F in angle , stop valve 15 mm bore, chromium plated, fancy type, with wall flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 45 | S&F in 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 46 | S&F in sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 47 | S&F in 15 mm bore chromium plated bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 48 | S&F in brass chromium plated tubular towel rail of 20mm dia D' type 60cm long between flanges complete all as specified and directed. |
| 49 | S&F in brass chromium plated Toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 50 | M&L in 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 51 | S&F in Soap dish, CP, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 52 | S&F in health fauset, brass chromium plated with 1 mtr long flexible PVC tube and wall hook all as specified and directed. |
| 53 | S&F in stainless steel Grating 127 mm size with locking system complete all as specified and as directed. |
| 54 | S&F in 25mm dia curtain rod (curtain rails), alumunium alloy, powder coated with and including decorattive knobs etc complete all as specified and directed. |
| 55 | S&F of 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 56 | S&F of 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 57 | S&F of 110 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed. |
| 58 | S&F of 75 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed. |
| 59 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles a PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; both side Prelam PVC sheet used instead of Plaincolour PVC sheet. Stile and rails feathered at edges beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 60 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 61 | S & F 100 mm butt hinges, heavy weight, cold rolled mild steel, and fixed hinge complete all as specified. |
| 62 | S&F of 150 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed. |
| 63 | S&F 125 mm size Aluminium handles, cast type, anodised and fixed all as specified and directed. |
| 64 | S&F of 200 mm long aluminium, anodised, sliding door bolt with hasp,staple(bolt type) and fixing clips of sheet,cast or extruded section or cast-aluminium alloy and fixed all as specified and directed. |
| 65 | S&F for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 66 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 67 | S&F Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminiu snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21,100mm long (2 no.) suitable handle (1no.) complete all as specified. |
| 68 | S&F Anoidised Aluminium grill (Anodised transperent or dyed to required shade according to IS :1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to existing window frame with C.P brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in charge. |
| 69 | M&L for 4.8 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed. |
| 70 | M&L for Double action floor spring M&L for hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed. |
| 71 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.all as specified and directed. |
| 72 | M&L for 100 mm thick Cement concrete type D- 2, (1:4:8) (using 40 mm graded granite stone aggregate) in sub base of flooring and paving etc comlete aa as specified. |
| 73 | M&L for sand filling 50 mm thick under floors or in foundation including watering and consolidation. |
| 74 | M&L for laying, Machine pressed concrete interlocking paver block any shape and size,with grey cement and no pigment confirming to IS 15638-200, 60 mm thickness M-35 grade all as specified. |
| 75 | M&L cement concrete (1:3:6) using 20mm graded aggregate, as in coping including necessary form work complete all as specified. |
| 76 | Material and labour for Precast RCC cover slab cement concrete, (1:2:4), type B1, using 20mm graded stone aggregate as in slabs with plain faces including setting in CM (1:4) complete all as specified. |
| 77 | Material and labour for PCC in surface channel and drains type B1,( 1:2:4) using 20mm graded stone aggregate complete all as specified. |
| 78 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete surface in CM (1:4) finished even & smooth (without using extra cement) complete all as specified. |
| 79 | M & L for concealed point wiring with two runs of 1.5 sq mm PVC insulated, unsheathed, FRLSH, 1100 Volts grade, ISI marked, multi-stranded copper conductor cable of proper colour coding, drawn through and including non-metallic PVC conduit (medium grade) with all necessary fittings and accessories, concealed in wall/ceiling or fixed to roof as required, including one run of 1.5 sq mm PVC insulated, multi-stranded, unsheathed copper conductor FRLSH cable (green colour) as earth continuity conductor connected to common earth dolly, including fixing of modular metal flush boxes of suitable size and thickness flush to wall with modular back plate and top cover for mounting of switch/bell push/socket etc., including cutting of chases and making good the disturbed surfaces to match existing finish, for one light/exhaust fan point controlled by one 5/6 Amps one-way switch, complete as specified and as directed by Engineer-in-Charge. |
| 80 | All as per item No 79.00 here in before but for one 3 point 5/6 Amps switch socket outlet point controlled by one switch on the same board. |
| 81 | All as per item No 79.00 here in before but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent board. |
| 82 | All as per item No 79.00 here in before, but for one 15/16 Amps switch socket outlet on independent board, wired with 2.5 sq mm PVC insulated, unsheathed, multi-stranded copper conductor cable along with 2.5 sq mm PVC insulated, multi-stranded copper conductor cable as earth continuity conductor (green colour), complete as specified and as directed by Engineer-in-Charge. |
| 83 | Supply and fix Modular switch 1 way 6 A,1 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 84 | Supply and fix Modular switch 1 way 16 A,1 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 85 | Supply and fix Socket, 6A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 86 | Supply and fix Socket, 6A/16A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 87 | Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed. |
| 88 | Supply and fixing lamp holder insulated body with back plate for batten fitting all as specified and as directed. |
| 89 | Supply and fixing LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 15 W complete all as specified and directed. |
| 90 | Supply and fixing of recessed type LED Panel Light 600 mm × 600 mm, 36 Watt, suitable for operation on 140–270 V AC supply, complete with powder coated die-cast aluminium housing, high quality glare free diffuser, independent electronic driver duly wired up to terminal block and all fixing accessories. The fitting shall have minimum system efficacy ≥100 lm/W, PF ≥0.90, CRI ≥80, THD ≤10%, IP20 protection, 6500K CCT, beam angle 120°, flicker ≤5%, instant start, inbuilt surge protection ≥3 kV and minimum life ≥35,000 burning hours, complete with internal connections, testing and commissioning in all respects as specified and directed. |
| 91 | Supply and fixing LED batten surface / wall mounted with extruded aluminium box type housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 10W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) with operating range of 150-270 V AC,complete all as per specified and directed. |
| 92 | Supply and fix LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including G.I pipe bracket ,bracket mounting clamp,bolts and nut etc all as specified and as directed. |
| 93 | Supply and fix LED bulkhead light of 10 W with system efficiency of ≥90 lumens/W, Ingress protection IP 66, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria with range 150-270V AC all as per specified and directed.pressure die-cast housing along with polycarbonate diffuser and LED's IP-65 protction of watt,PF>0.95, complete all as specified and as directed. |
| 94 | Supply and fixing of sheet metal enclosure, double door type (IP-43), SPN Distribution Board, duly phosphatised and powder coated, complete with 100 Amps rated copper busbar, neutral link and earth bar, 8-way, suitable for 240 Volts, single phase, 50 Hz AC supply, flush or surface mounted as required, including all accessories and interconnections, complete as specified and as directed by Engineer-in-Charge. |
| 95 | Supply and fixing of 240 Volts, 10 kA, ‘C’ curve, Double Pole (DP) MCB of 10-16 Amps rating in TPN DB, complete with connections, testing and commissioning, complete as specified and as directed by Engineer-in-Charge. |
| 96 | Supply and fixing of 240 Volts, 10 kA, ‘C’ curve, SP MCB of 5–32 Amps rating in MCB DB, complete with connections, testing and commissioning, complete as specified and as directed by Engineer-in-Charge. |
| 97 | Supply and fixing of ceiling fan complete with blades, down rod, electronic regulator and all accessories, 230 V, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE, five star rated with Brushless Direct Current Motor (BLDC), including providing and fixing heavy duty MS clamp suitable for mounting fan on GI/MS pipe, nuts, bolts, saddles, fan hook,washers connection complete all as specified and directed. |
| 98 | Supply and fixing of galvanised steel pipe, medium grade, 50 mm dia, used for hanging/supporting ceiling fan,properly fixed to wall/roof structure for safe suspension of fan, complete all as specified and as directed by Engineer-in-Charge. |
| 99 | Supply and fixing of exhaust fan made of sturdy engineering plastic, AC single phase, 230V, of 250 mm sweep, complete with blades, frame and louvers, including all fixing arrangements, wiring connections, etc., complete all as specified and directed by the Engineer-in-Charge. |
| 100 | Material and labour for repair of earthing complete with galvanised steel earth plate electrode of size 600 × 600 × 6 mm, buried directly in ground at a depth not less than 2.25 m below ground level, with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of galvanised iron/steel bolts, nuts, check nuts and washers, and connected to equipment as directed, including providing funnel with GI medium grade watering pipe of 20 mm bore with wire mesh, charcoal or coke and common salt in alternate layers of 150 mm compacted thickness all around the earth electrode, complete with PCC (1:3:6) type C-1 chamber, and 50 mm thick precast RCC (1:2:4) type B-1 cover slab reinforced with 8 mm dia deformed bars at 150 mm centre to centre with suitable handle of 10 mm dia round bar, including GI medium grade pipe for protection of earth lead, complete with necessary excavation in soft/loose soil and disposal of excavated earth to a distance not exceeding 50 m, including dismantling of existing earthing and testing on completion, complete all as shown on Electrical Plate No. 3 of MES SSR Part-I and as directed by Engineer-in-Charge |
| 101 | Excavating in post holes (or similar holes) in loose/soft soil, each not exceeding 0.50 cubic metre, including getting out the excavated material, returning, filling in, and ramming earth or broken rubble mixed with earth in layers not exceeding 25 cm thickness, including disposal of surplus excavated soil to a distance not exceeding 50 metres, and making good the disturbed surfaces, complete all as specified and directed. |
| 102 | Material and labour for providing and laying plain cement concrete 1:3:6 (Type C2) using 40 mm graded stone aggregate in foundations, filling and mass concrete, including mixing, placing, compacting, levelling, and finishing the surface, complete all as specified and directed. |
| 103 | Excavation in trenches/ foundation in soft/ loose soil not exc. 1.5 metre wide and not exc. 1.50m deep for GI Pipe and getting out including forming bottom surface to required level or slope, complete all as specified and directed. |
| 104 | Removing excavated material not exceeding 50 metres and depositing the same where directed at a level not exceeding 1.5 metres above the starting point, complete as specified and as directed by Engineer-in-Charge. |
| 105 | Material and labour for providing and laying GI tubing of 25 mm nominal bore, medium grade, complete with all necessary fittings such as bends, tees, sockets, unions, clamps, and accessories, laid in trenches or fixed to wall/ceiling with suitable supports, including cutting, threading, jointing, and testing, complete in all respects as specified and directed |
| 106 | Material and labour for providing and laying GI tubing of 20 mm nominal bore, medium grade, complete with all necessary fittings such as bends, tees, sockets, unions, clamps, and accessories, laid in trenches or fixed to wall/ceiling with suitable supports, including cutting, threading, jointing, and testing, complete in all respects as specified and directed |
| 107 | Supply and fixing of rotational moulded polyethylene water storage tank (vertical cylindrical, closed top) of 1000 litres capacity, including all necessary fittings such as inlet, outlet, overflow, washout pipe, tank nipple, and locking arrangement, complete in all respects, fixed in position including taking down as directed by the Engineer-in-Charge. |
| 108 | Material and labour for cutting, screwing, threading and fixing of GI tubing of 25 mm and/or 32 mm nominal bore for alterations or additions to existing pipe lines complete in all as specified and directed by the Engineer-in-Charge |
| 109 | Supply and fixing of gun metal gate valve with iron wheel head, screwed at both ends suitable for connection with 25 mm nominal bore GI tubing, including jointing, testing and making leak-proof connections, complete in all respects as specified and directed. |
| 110 | Supply and fixing of gun metal gate valve with iron wheel head, screwed at both ends suitable for connection with 20 mm nominal bore GI tubing, including jointing, testing and making leak-proof connections, complete in all respects as specified and directed. |
| 111 | Supply and fixing of high-pressure PVC float valve with polythene float and fly nuts, screwed type suitable for connection with iron pipe or PVC ferrule, of 25 mm nominal bore, including making necessary connections, adjustments and testing for proper operation, complete in all respects as specified and directed. |
| 112 | Supply and fixing in replacement of angles,flat iron, fixed independently and interconnected with welding work, without the use of connecting plates, cut to required lengths as indicated, for water tank staging or similar structural works, conforming to Fe 410-W (Grade E-250), Quality A steel, including dismantling of old/unserviceable existing staging, complete all as specified and directed by the Engineer-in-Charge. |
| 113 | M&L for providing hardcore of gauge n exc 63mm,deposited ,spread and levelled in layers n exc 20 cm thick,watered and rolled/rammed to a true surface including filling of moorum/red bajri all as specified and as directed by Engr in charge. |
| 114 | M&L for brick work with sub-class ‘B’ bricks, straight or curved on plan exceeding 6.0m mean radius, built in CM (1:6), complete all as specified and directed. |
| 115 | M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick or concrete surfaces,rendering finished even and smooth (Without using extra cement ) complete all as specified and directed. |
| 116 | Material and labour for providing, laying, testing and commissioning of XLPE insulated, PVC bedded, galvanised steel strip/wire armoured, 1100 Volts grade heavy duty power cable with stranded aluminium conductor of size 10 sq mm, 2 core, laid in ground/on wall/air as required, including supply and fixing of suitable glands, lugs, nuts, bolts and washers at both ends, complete with all connections, testing and commissioning, complete as specified and as directed by Engineer-in-Charge. |
| 117 | Providing sand cushioning to underground cables with a layer of sand 8 cm thick below the cable and 15 cm thick above the cable in trenches,including punning/ramming to achieve a total compacted thickness of 18 cm, complete as specified and as directed by Engineer-in-Charge. |
| 118 | Material and labour for providing Sub-Class ‘B’ bricks of standard size for covering of cables, laid dry flat in trenches, complete as specified and as directed by Engineer-in-Charge. |
| 119 | Supply and fixing of galvanised steel pipe, light grade, 40 mm dia, laid in trenches or underground/under floor/under road or fixed to pole for protection of cable/earth strip, including clamps with nuts, bolts and washers, complete as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 120 | Supply and fixing of galvanised steel pipe, light grade, 40 mm dia, laid in trenches or underground/under floor/under road or fixed to pole for protection of cable/earth strip, including clamps with nuts, bolts and washers, complete as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender