Tender For Addition/ Alteration And Improvement To P-315 At Hqtc Banglaore
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Aug 2026
11 days left
EMD
77680
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bangalore → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/ Alteration And Improvement To P-315 At Hqtc Banglaore
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GARRISON ENGINEER (AF) BANGALORE NAME OF WORK : ADDN/ ALTN AND IMPROVEMENT TO P-315 AT HQTC BANGLAORE CA NO: GE(AF)/B/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Taking down of chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames) and set aside or removing from site complete all as specified and as directed by Engr-in-charge. |
| 3 | Taking down of chowkats or frames exc 1.5 sqm but not exc 4 sqm each (without taking off shutters from the frames) and set aside or removing from site complete all as specified and as directed by Engr-in-charge. |
| 4 | Supply and fix for 2nd class HW plain chowkhats and framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engr-in-charge. |
| 5 | Supply and fix for 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-charge. |
| 6 | Supply and fix for 35mm thick factory made 2nd class hard wood glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc., (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc., size of members of shutters complete all as specified and as directed by Engr-in-charge. |
| 7 | Supply and fix for factory made solid PVC moulded door shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face and 2mm plain colour PVC sheet on back face in frame at site complete all as specified and as directed by Engr-in-charge. |
| 8 | Supply and fix in repairs solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, in opening complete all as specified and as directed by Engr-in-charge. |
| 9 | Supply and fix for factory made uPVC white colour (unplasticised poly vinyl chloride) door frames having uPVC profile section of size 60x63mm having outer wall thickness of 2.0mm (+/- 0.3 mm) door shutter shall be made of 103x45mm having outer wall thickness of 2.0mm (+/-0.3 mm). Door mullion shall be made of 75x39mm having outer wall thickness of 2.0mm (+/- 0.3 mm). All profile of frames and sash shall be reinforced with galvanised mild steel section of 1.2mm wall thickness with size of 27x26x27mm for frame and 48x38x48mm for sash and 33x18x33mm for mullion at wherever required. All the corners and joints of the frame and sash shall be mitred cut and fusion welded without any mechanical joint. All welded joints are to be neatly trimmed and profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc., after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and as directed by Engr-in-charge.Notes: (i) Glass shall be measured and paid separately.(ii) For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth and width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 10 | Supply and fix for factory made uPVC white colourfixed glazed window/ ventilator made of (small series) frame 47x50mm mullion 47x68mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100x8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc., Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc., After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and as directed by Engr-in-charge.Notes: (i) Glass shall be measured and paid separately.(ii) For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth and width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 11 | Supply and fix for factory made uPVC three track sliding window made of (small series) frame 63x60mm mulion 75x60mm both having wall thickness of 2.00 ± 0.2 mm and single glazing bead of appropriate dimension (area upto 0.75 sqm) comprising of uPVC multichambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60±0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, TPE gasket, G.I. fasteners 100x8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc., profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be used to end milling joint with (L mechanical joint), including drilling of holes for fixing hardwares and drainage of water etc., after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality including z fixing of glass 4.8mm thickness complete all as specified and as directed by Engr-in-charge.Notes: (i) Wire mesh and glass shall be measured and paid separately.(ii) For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth and width of profile shall be acceptable, Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 12 | Supply and fix for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including beads complete all as specified and as directed by Engr-in-charge. |
| 13 | Supply and fix for 4.8mm thick sheet glass ordinary quantity and glazing with oil putty or fixing in uPVC doors or windows of one side tinted or not in squares not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-charge. |
| 14 | Material and labour for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 height complete all as specified and as directed by Engr-in-charge. |
| 15 | Supply and fix for 100mm mild steel butt hinges, medium weight, cold rolled complete all as specified and as directed by Engr-in-charge. |
| 16 | Supply and fix for 100mm long extruded brass handles, fabricated type polished complete all as specified and as directed by Engr-in-charge. |
| 17 | Supply and fix for 150mm aluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and as directed by Engr-in-charge. |
| 18 | Supply and fix for 200mm aluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and as directed by Engr-in-charge. |
| 19 | Supply and fix for 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engr-in-charge. |
| 20 | Supply and fix for 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engr-in-charge. |
| 21 | Supply and fix in repair 300mm size mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engr-in-charge. |
| 22 | Supply and fix in repairs fancy type stainless steel curtain rod 25mm dia with suitable SS brackets with suitable wooden round base and fancy type end top matching to curtain rod complete all as specified and as directed by Engr-in-charge.Note: Additional supporting bracket shall be provided if length is exc 1.2m and rate quoted shall includes for the same. |
| 23 | Supply and fix for powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed by Engr-in-charge. |
| 24 | Supply and fix for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium sliding window and ventilator shutters, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and as directed by Engr-in-charge.Note: Sheet glass and SS wiremesh shall be measured and paid separately. |
| 25 | Supply and fix for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed by Engr-in-charge.Note: Sheet glass and SS wiremesh shall be measured and paid separately. |
| 26 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., disposal of unserviceable materials, debris and rubbish to a distance complete all as specified and as directed by Engr-in-charge. |
| 27 | Material and labour for precast cement concrete block masonry with solid blocks type C1, 1:3:6 (Using 20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 28 | Material and labour for providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 (Using 20mm graded stone aggregate) and setting in cement mortar 1:6 in walls complete all as specified and as directed by Engr-in-charge. |
| 29 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engr-in-charge. |
| 30 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions complete all as specified and as directed by Engr-in-charge.Note: WPC shall be measured and paid separately. |
| 31 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 32 | Material and labour for rendering 10mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of chajja, roof projection, shelves etc., and finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 33 | Material and labour for providing and fixing at al levels aluminum composite panels louvers for external /internal wall cladding with all necessary aluminum member frame works at all heights and elevation, fastening material, equipment handing transportation, workmanship, preparation of working drawings, staging scafolding etc., The aluminum composite louvers panel shall be the ACP louvers should be or 30mm thick in 610x2440mm, made with 3mm ACP in perfect corrugation of 30x30mm with a gap of 30mm, the whole corrugation is fixed on 3mm flat ACP sheet for easy fixing and dimensional harmony. The surface shall be finished with PVDF based coating and services coating on the reverse side shall be with poly and including and fixing of aluminum structural framework, including vertical and horizontal members (50x25x1.1mm) tubes or as per structural design) to support ACP panels, including self-thread screw/ stick glazing, fasteners, and necessary weather proof sealent complete all as specified and as directed by Engr-in-charge. |
| 34 | Material and labour for providing and fixing at all levels aluminum composite panels for external internal wall cladding with all necessary aluminum member frame works at all heights and elevation, the total thickness of ACP should be 4mm with 0.5mm thick aluminum skin both side and should consist of 3mm fire retardant mineral filled core should comprise of upto 70% Inorganic compound which is 100% non- combustible mineral and balance 30% is LDPEHHDPE. B1 FR grade ACP core should be conforming to EN13501-1, ASTM NFPA 285, ASTM E -119 aluminum alloy of 1100/3003 series, the weight of the panel should be 7.0 kgs/m2, the surface shall be finished with PVDF based coating of minimum 30(±5) micron on the top sides and services coating on the reverse side shall be with polymer paint coating shall conform to ECCA or AAMA, including and fixing of aluminum structural framework, including vertical and horizontal members (50x25x1.1mm) tubes or as per structural design) to support ACP panels, including self-thread screw/ stick glazing, fasteners, and necessary weather proof sealent complete all as specified and as directed by Engr-in-charge. |
| 35 | Material and labour for providing and fixing at all levels aluminum composite panels for external/ internal wall cladding with all necessary aluminum member frame works at all heights and elevation, the total thickness of ACP should be 4mm with 0.25mm thick aluminum skin both side and should consist of 3.5mm mineral filled core should comprise of upto 70% in organic compound which is 100% non- combustible mineral and balance 30% is LDPE+HDPE. aluminum alloy of 1100/3003 series, the weight of the panel should be 6-7 kgs/m2, the surface shall be finished with PVDF based coating of minimum 30 (±5) micron on the topsides with rustic finish and services coating on the reverse side shall be with polymer paint coating shall conform to ECCA or AAMA, including and fixing of aluminum structural framework, including vertical and horizontal members (50x25x1.1mm) tubes or as per structural design) to support ACP panels, including self-thread screw/ stick glazing, fasteners, and necessary weather proof sealent complete all as specified and as directed by Engr-in-charge. |
| 36 | Material and labour for providing and fixing a structural glazing system at any floor level, comprising a framework of extruded aluminum alloy sections conforming to IS:733 and IS:1285, powder coated to a minimum of 50 microns in an approved shade, and securely anchored to the RCC structure stone masanory, brick wall with heavy-duty brackets and stainless steel fasteners. The glazing shall consist of 6mm thick high-performance toughened or heat-strengthened glass, factory-bonded to aluminum sub-frames using structural-grade silicone sealant with a calculated structural bite to withstand site-specific wind pressures as per IS: 875. All panel joints and perimeters shall be made water-tight using weather-grade silicone sealant over closed-cell backer rods and EPDM gaskets. The rate shall be inclusive of all specialized scaffolding, surface preparation using the two-cloth solvent cleaning method, and mandatory field testing, including water hose and deglazing tests, the clear out-to-out area rate incluse all items such as glass frame and fittings of the completed fascia complete all as specified and as directed by Engr-in-charge. |
| 37 | Dismantling structural steel work including doors, gates and similar works but excluding framed truss etc., complete all as specified and as directed by Engr-in-charge. |
| 38 | Supply and fix for mild steel trussed, purlins, fencing posts, crane gantries rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) which can be bend or curver of any shape conforming to FFe-410- W (GdeE-250) quality' A' including distance pieces, cleats, nut and bolt any size and length etc., complete all as specified and as directed by Engr-in-charge. |
| 39 | Supply and fix for mild steel flats 40x6mm thick for hand rails, wind ties, posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 410-O or Fe 310-O complete all as specified and as directed by Engr-in-charge. |
| 40 | Material and labour for plain cement concrete type B0, 1:2:4 (Using 12.5mm graded stone aggregate) cast in situ in cills and other similar bands, plinth courses, parapets, copings, holdfast, bed plates, filling hollow section of pressed steel frame and the like including use and waste of form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by Engr-in-charge. |
| 41 | Supply and fix for transparent or translucent corrugated steel sheeting 1-2 mm thick of any colour having as in roof covering /cladding to wall, fixed with self tapping screws/ J hooks and bolts complete all as specified and as directed by Engr-in-charge. |
| 42 | Supply and fix for pre-painted galvalume mangalore pattern aluminium zinc coating GI based corrugated steel sheeting 0.50mm thick of plain or curved any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws/J hooks and bolts complete all as specified and as directed by Engr-in-charge. |
| 43 | Supply and fix for pre-painted galvalume mangalore pattern aluminium zinc coating GI based plain steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws/ J hooks and bolts complete all as specified and as directed by Engr-in-charge. |
| 44 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge. |
| 45 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-charge. |
| 46 | Material and labour for 40mm thick PCC (1:2:4), type B0 (Using 12.5mm graded stone aggregate) as in flooring complete all as specified and as directed by Engr-in-charge. |
| 47 | Material and labour for 75mm thick PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) for hard standing including finishing the surface even and fair complete all as specified and as directed by Engr-in-charge. |
| 48 | Material and labour for PCC type C2 ,1:3:6 (Using 40mm graded stone aggregate) as in surface channels and drain complete all as specified and as directed by Engr-in-charge. |
| 49 | Material and labour for 25mm thick PCC (1:2:4), type B0 (Using 12.5mm graded stone aggregate) as in flooring, rough finish surfaces for receving top layer complete all as specified and as directed by Engr-in-charge. |
| 50 | Material and labour for virified ceramic tiles 8-10mm thick polished of each tiles 600x600mm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:6 complete all as specified and as directed by Engr-in-charge. |
| 51 | Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile 300x300mm, in floors etc., set and jointed in neat cement slurry over and including 15mm thick screed bed of cement mortar 1:6 and pointed with white or coloured cement to match complete all as specified and as directed by Engr-in-charge. |
| 52 | Material and labour for coloured glazed ceramic design tiles 350x250x7mm/ 450x300x7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed by Engr-in-charge. |
| 53 | Material and labour for preparing new plastered surfaces and applying three coats of white wash on surfaces of ceilings complete all as specified and as directed by Engr-in-charge. |
| 54 | Material and labour for preparing old plastered surfaces and applying two coats of white wash on surfaces of ceilings complete all as specified and as directed by Engr-in-charge. |
| 55 | Material and labour for preparing new plastered surfaces and applying through mechanical means two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed by Engr-in-charge. |
| 56 | Material and labour for preparing old plastered surfaces and applying one coat of cement base paint through mechanical means complete all as specified and as directed by Engr-in-charge. |
| 57 | Material and labour for preparing new plastered surfaces of walls and applying through mechanical means two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 2mm thickness plaster of paris putty to prepare the surface even and smooth complete all as specified and as directed by Engr-in-charge. |
| 58 | Material and labour for complete removal of existing treatment of old plastered surfaces of walls and applying through mechanical means two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 1mm thickness plaster of paris putty to prepare the surface even and smooth complete all as specified and as directed by Engr-in-charge. |
| 59 | Material and labour for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and as directed by Engr-in-charge. |
| 60 | Material and labour for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-charge. |
| 61 | Material and labour for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge. |
| 62 | Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engr-in-charge. |
| 63 | Material and labour for complete removal of existing treatment of walls and applying two coats of exterior emulsion apex paint (weather coat) over a coat of approved primer complete all as specified and as directed by Engr-in-charge. |
| 64 | Supply and fix in repairs premium quality 15mm bib tap with wall flange chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engr-in-charge. |
| 65 | Supply and fix in repair soap dish complete all as specified and as directed by Engr-in-charge. |
| 66 | Supply and fix in repairs table top basin of size 170x835x455mm /565X425X140mm of white colour complete all as specified and as directed by Engr-in-charge. |
| 67 | Supply and fix in repair vitreous china wash down water closet (pedestal pattern, ETWC), white including fixing bolts, plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-charge. |
| 68 | Supply and fix in repairs PVC flushing cistern 10 ltrs capacity valveless syphonic action type low level, white, with inlet, ball valve float and handle including brackets and flush pipe complete all as specified and as directed by Engr-in-charge. |
| 69 | Supply and fix in repairs fancy type CP 2 way bib cock with wall flanges complete all as specified and as directed by Engr-in-charge. |
| 70 | Supply and fix in repairs fancy type 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-charge. |
| 71 | Supply and fix in repairs 6 to 8mm thick bevelled edge mirror of selected quality glass of any size with decorative beadings, mounted on wall with CP brass screws and cup washers complete all as specified and as directed by Engr-in-charge. |
| 72 | Supply and fix in repairs 15mm bore hand shower (health faucet) with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and as directed by Engr-in-charge. |
| 73 | Supply and fix in repair towel rail of 600mm long complete all as specified and as directed by Engr-in-charge. |
| 74 | Supply and fix in repair urinal, wall hung, back inlet, built in waste outlet with water seal of size 400x330x630mm complete all as specified and as directed by Engr-in-charge. |
| 75 | Supply and fix in repairs 8mm thick curved shape urinal partition with frosted glass chrome finish of size 900x450mm complete all as specified and as directed by Engr-in-charge. |
| 76 | Supply and fix in repairs glass shelf of 600mm long with CP bracket complete all as specified and as directed by Engr-in-charge. |
| 77 | Supply and fix in repairs CP connection 15mm dia and 450mm long with two Nos of brass check nuts and washers complete all as specified and as directed by Engr-in-charge. |
| 78 | Supply and fix PVC gratings of size 125mm dia complete all as specified and as directed by Engr-in-charge. |
| 79 | Supply and fix in repair angle stop cock with wall flange 15mm dia chromium plated, screwed down, high pressure, screwed both ends for 15mm bore iron pipes or for unions complete all as specified and as directed by Engr-in-charge. |
| 80 | Dismantling water tanks exc 500 ltrs and not exc 1000 ltrs complete all as specified and as directed by Engr-in-charge. |
| 81 | Supply, hoisting, fixing in position and connecting incoming and outgoing pipes, 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), triple layer complete all as specified and as directed by Engr-in-charge. |
| 82 | Supply and fix in repairs 25mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and as directed by Engr-in-charge. |
| 83 | Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410x330x160mm complete all as specified and as directed by Engr-in-charge. |
| 84 | Taking down rain water pipes including all fittings any size and pattern upto 10th storey floors complete all as specified and as directed by Engr-in-charge. |
| 85 | Material and labour for 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-charge. |
| 86 | Material and labour for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-charge. |
| 87 | Supply and fix in repairs 75mm dia., PVC bends with access door complete all as specified and as directed by Engr-in-charge. |
| 88 | Supply and fix in repairs 110mm dia., PVC bends with access door complete all as specified and as directed by Engr-in-charge. |
| 89 | Supply and fix in repairs 110mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed by Engr-in-charge. |
| 90 | Supply and fix in repairs 75mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed by Engr-in-charge. |
| 91 | Supply and fix in repairs 110mm dia., vent cowl complete all as specified and as directed by Engr-in-charge. |
| 92 | Taking up or down 20mm dia steel tubing connections, including cleaning for re-fixing or removal to store complete all as specified and as directed by Engr-in-charge. |
| 93 | Taking up or down 25mm dia steel tubing connections, including cleaning for re-fixing or removal to store complete all as specified and as directed by Engr-in-charge. |
| 94 | Taking up or down 32mm dia steel tubing connections, including cleaning for re-fixing or removal to store complete all as specified and as directed by Engr-in-charge. |
| 95 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and as directed by Engr-in-charge. |
| 96 | Supplying and laying of 32mm CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls, ceilings or laying in floors including all fittings complete all as specified and as directed by Engr-in-charge. |
| 97 | Supplying and laying of 25mm CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls, ceilings or laying in floors including all fittings complete all as specified and as directed by Engr-in-charge. |
| 98 | Supplying and laying of 20mm CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls, ceilings or laying in floors including all fittings complete all as specified and as directed by Engr-in-charge. |
| 99 | Supply and fix in repairs PP-R gate valves (brass insert) of 25mm dia with iron wheel head screwed both ends for iron pipe and fixed etc., complete all as specified and as directed by Engr-in-charge. |
| 100 | Removing building materials etc., to a distance of 10 KM, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed by Engr-in-charge. |
| 101 | Taking down carefully copper /aluminium point wiring (light, fan, socket or power) complete, including fitting fixtures such as switches, sockets, ceiling rose, pendants, regulators, light fittings etc., removing materials to store for keeping in safe custody for taking credit and making good to disturbed surfaces with plaster and matching with the existing colour of wall/ floor etc., complete all as specified and as directed by Engr-in-charge. |
| 102 | Taking down carefully ceiling fan from ceiling, dismantaling blades, and removing fan and painting of ceiling fans complete, with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc., and refixing of ceiling fan in same position in serviceable condition with greasing and oiling including provision of three core 1.5 sqmm cable from ceiling rose to fan connector complete all as specified and as directed by Engr-in-charge. |
| 103 | Material and labour for concealed point wiring with 1.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including PVC rigid conduit medium grade of size not less than 25mm dia ISI marked with all accessories such as tee, bend, joint cover etc., round/ square PVC blocks at junction for batten holders, ceiling rose etc., screws, gutti / roul plugs PVC all as per site requirements including fixing on stone walls/ brick masonary walls surface /ceilings /floors etc., modular MS sunken boxes with earth dolly for mounting of modular switches/ sockets/ regulator etc., and 1.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces /wall with plaster and matching with the existing colour of wall /floor etc., complete all as specified and as directed by Engr-in-charge for the following:Note: Cutting, chasing, drilling in any type of wall for fixing of concealed conduit and sunken boxes shall be included in quoted rate. No extra payment will be made for this. |
| 104 | One light point controlled by one single pole 5 Amps switch. |
| 105 | One ceiling/Wall fan point controlled by one single pole 5 Amps switch. |
| 106 | One exhaust fan point controlled by one single pole 5 Amps switch. |
| 107 | One 5 pin socket point 5 Amps on independent board. |
| 108 | One 5 pin socket point 5 Amps on same board with other switches. |
| 109 | All as per item No.102 here-in-before but for power point wiring with 2.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable and 2.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable as continuous earth lead for 6 pin 15 Amps switch socket outlet on independent board complete all as specified and as directed by Engr-in-charge. |
| 110 | Supply and fix modular switch, 1 Module, single pole one way 10 Amps complete all as specified and as directed by Engr-in-charge. |
| 111 | Supply and fix modular socket, 2 Module, 6 Amps, 5 pin, 230 volts AC complete all as specified and as directed by Engr-in-charge. |
| 112 | Supply and fix for modular switch, 1 Module, single pole one way 16 Amps complete all as specified and as directed by Engr-in-charge. |
| 113 | Supply and fix for modular socket, 2 Module, 6/16 Amps, 6 pin, 230 volts AC complete all as specified and as directed by Engr-in-charge. |
| 114 | Supply and fix for modular type fan regulator upto 120 watts with 5 step speed control for fans any sweep 1200mm /1400mm complete all as specified and as directed by Engr-in-charge. |
| 115 | Supply and fix for PVC ceiling rose 65x50mm surface type with 3 terminals 230 volt complete all as specified and as directed by Engr-in-charge. |
| 116 | Supply and fix for modular white cover plate with frame, 1 module complete all as specified and as directed by Engr-in-charge. |
| 117 | Supply and fix for modular white cover plate with frame, 2 module complete all as specified and as directed by Engr-in-charge. |
| 118 | Supply and fix for modular white cover plate with frame, 3 module complete all as specified and as directed by Engr-in-charge. |
| 119 | Supply and fix for modular white cover plate with frame, 4 module complete all as specified and as directed by Engr-in-charge. |
| 120 | Supply and fix for modular white cover plate with frame, 6 module complete all as specified and as directed by Engr-in-charge. |
| 121 | Supply and fix for modular white cover plate with frame, 8 module complete all as specified and as directed by Engr-in-charge. |
| 122 | Supply and fix for modular metal flush box 1/2 module complete all as specified and as directed by Engr-in-charge. |
| 123 | Supply and fix for modular metal flush box 3 module complete all as specified and as directed by Engr-in-charge. |
| 124 | Supply and fix for modular metal flush box 4 module complete all as specified and as directed by Engr-in-charge. |
| 125 | Supply and fix for modular metal flush box 6 module complete all as specified and as directed by Engr-in-charge. |
| 126 | Supply and fix for modular metal flush box 8 module complete all as specified and as directed by Engr-in-charge. |
| 127 | Supply and fix for LED lights fitting 4 feet 20 watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engr-in-charge. |
| 128 | Supply and fix for LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engr-in-charge. |
| 129 | Supply and fix for LED light fitting round shape 15 watt warm white 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-charge. |
| 130 | Supply and fix for LED luminaire 600x600mm, 35/36 watt, 220 V AC recessed/ surface type mounting with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engr-in-charge. |
| 131 | Supply and fix for LED light fitting outdoor type 10 watt bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-charge. |
| 132 | Supply and fix for LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engr-in-charge. |
| 133 | Supply and fix for ceiling fans complete with blades, down rods, electronic regulator and accessories, AC single phase 230 V, 1200mm sweep Min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engr-in-charge. |
| 134 | Supply and fix for wall mounted fan AC single phase 230 V of size 450mm sweep complete all as specified and as directed by Engr-in-charge. |
| 135 | Supply and fix for exhaust fan steel body AC single phase 230 V of size 380mm sweep, 900 RPM with blades, and frame and louvers complete all as specified and as directed by Engr-in-charge. |
| 136 | Supply and fix for sheet metal enclosure for DB's double door TPN 04 ways including MCCB 125 Amp to be used as incomer and outgoing as MCB single pole, deep drawn with 200 Amps rated copper bus bar 415 V complete all as specified and as directed by Engr-in-charge. |
| 137 | Supply and fix for sheet metal enclosure for DB's double door SPN, 8 ways when MCBs to be used single pole and neutral, deep drawn with 200 Amps rated copper bus bar 230 Volt complete all as specified and as directed by Engr-in-charge. |
| 138 | Supply and fix for sheet metal enclosure for DB's double door SPN, 12 ways when MCBs to be used single pole and neutral, deep drawn with 200 Amps rated copper bus bar 230 Volt complete all as specified and as directed by Engr-in-charge. |
| 139 | Supply and fix for MCB SP, 6-32 Amps, 230V, C- series with breaking capacity of 10KA complete all as specified and as directed by Engr-in-charge. |
| 140 | Supply and fix for MCB SPN, 40 Amps, 230 V, C- series with breaking capacity of 10 KA complete all as specified and as directed by Engr-in-charge. |
| 141 | Material and labour for concealed sub main wiring with two single core 2.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid conduit medium grade of size not less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc., screws, gutti /roul plugs PVC all as per site requirements including fixing inside stone walls/ brick masonary walls /ceilings /floors etc., with 2.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/ wall with plaster and matching with the existing colour of wall /floor etc., complete all as specified and as directed by Engr-in-charge.Note: Two run of single core 2.5 sqmm cable and one run 2.5 sqmm earth wire including PVC concealed conduit together will be measured as one unit. |
| 142 | Material and labour for concealed sub main wiring with two single core 4 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid conduit medium grade of size not less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc., screws, gutti /roul plugs PVC all as per site requirements including fixing inside stone walls/ brick masonary walls /ceilings /floors etc., with 4 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/ wall with plaster and matching with the existing colour of wall /floor etc., complete all as specified and as directed by Engr-in-charge.Note: Two run of single core 4 sqmm cable and one run 4 sqmm earth wire including PVC concealed conduit together will be measured as one unit. |
| 143 | Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edged of the plate not less than 1.5m below normal ground level, connected to galavanised iron earth lead by means of bolt, nuts, check nuts and washer of galavanised iron steel wire 4mm dia as earthing lead as shown in electrical plate No 4 of SSR Part I connected to earthing test point or indicated including testing on completion including necessary excavation and earth work in soft/ loose soil, earth pit in PCC 1:3:6 type C1 using 20mm graded stone aggregate, funnel, 20mm dia GI medium grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs, funnel and wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not exc 50m, complete testing on completion as shown in electrical plate No.4 of SSR part No1 complete all as specified and as directed by Engr-in-charge.Note: The unit rate includes main earthing lead galavanised iron steel wire 4mm dia with 15mm dia GI light grade earth lead protection pipe from earth electrode to test point up to 7.5m. |
| 144 | Supply and fix for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for loop earthing 4mm dia galvanised iron or steel wire complete all as specified and as directed by Engr-in-charge. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender