Tender For Providing Of Sewerage Line And Soakage Pit At Zone R And Provn Of Covered Shed Near Bldg No P-157 And Allied Services Of Zone B At Mil Stn Agartala
Tender Value
9.24 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
15 days left
EMD
18480
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
agartala → Tripura
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Sewerage Line And Soakage Pit At Zone R And Provn Of Covered Shed Near Bldg No P-157 And Allied Services Of Zone B At Mil Stn Agartala
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil complete as specified and directed. |
| 3 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete as specified and directed. |
| 4 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering. Complete all as specified and directed. |
| 5 | M & L for hardcore of broken bricks of gauge not exceeding 63 mm , deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface. |
| 6 | M&L 100 mm thick PCC type D-2 1:4:8 ( 40mm graded stone aggt) in sub base of floor complete as specified and directed. |
| 7 | M&L for 40mm thick PCC (1:2:4)type B1 20 mm graded stone aggregate fair and finish with using extra cement complete all as specified and directed. |
| 8 | M&L Chequered cement concrete tiles 30cmx30cmx25mm thick machine pressed set jointed and pointed in neat cement slurry as in floors and cut and polished using grey cement and pigments over screed bed or bedding layer of mortar 20mm thick for laying floor finishes in cement mortar (1:4) complete all as specified and directed |
| 9 | M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate complete as specified and directed. |
| 10 | Material and labour for brick work with locally available sub class ‘B’, old size, best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) all as specified and directed. |
| 11 | M&L Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls, built in cm 1:4 complete all as specified and directed. |
| 12 | M&L for Cement concrete Type B2 1:3:6 (40 mm graded aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts complete as Specified and directed. |
| 13 | M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 14 | S&F Steel work in tubular trusses and vertical posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and directed. |
| 15 | S&F Rolled mild steel purlins ,crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.Gde Fe410-0 or Fe 310-O complete as specified and directed. |
| 16 | S&F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes ,without and attachment of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed. |
| 17 | S&F Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends;screwed end to be fitted with washers and one hexagonal or square nut.dia of bolt 11 to 15mm & length exc 5cm long and n exc10cm complete as specified and directed. |
| 18 | S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/ eaves board fixed with selp tapping screw complete all as specified and directed. |
| 19 | S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/eaves board fixed with selp tapping screw complete all as specified and directed. |
| 20 | M&L of two coat of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth incl preparation of surfaces complete all as specified. |
| 21 | M&L 15mm thick rendering in CM (1:4) on brick work/ concrete surfaces in two layers (10mm backing coat and 5mm finishing coat finished even and fair complete all as specified and as directed. |
| 22 | M& L for two coat of cement base paint on new plastered surface including preparation of surface complete all as specified and as directed |
| 23 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil. |
| 24 | Removing Excavated soils exceeding 250m but not exceeding 500m and depositing where directed. |
| 25 | M&L for Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) as in copings, etc slightly rounded or chamfered angles and throating as directed. |
| 26 | Material and labour 75 mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as in plinth protection finished fair and even w/o using extra cement and making groove of 10mm width at every 3m intervals and at diagonals and filling the joints with bitumen mastic( a mix of bitumen and sand in 1:1 by weight) complete all as specified and directed. |
| 27 | M & L precast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in cover slab of manholes, septic tank etc, set in cement mortar (1:4) including necessary form, moulds etc and including taking out/removal of existing unserviceable cover slab from manholes /septic tank complete all as directed by Engr- in- Charge .(Note :- Reinforcement shall be measured and paid separately) |
| 28 | S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 29 | M&L for 100 mm thick concrete bed to drain pipe (250 mm bore) with PCC (1:4:8) type D2 using 40mm graded stone aggregate including packing under and haunching aginnst the sides of pipe after they are laid jointed and tested complete all as specified and as directed. |
| 30 | S&F 250 mm bore reinforced Concrete pipe Class NP2 laid and jointed complete with collars complete all as specified and as directed. |
| 31 | Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed. |
| 32 | Material & Labour for 15 mm thick rendering in cement mortar (1:4) in one layer mixed with water proofing compound by weight of cement or as per manufacturer's instructions, on fair faces of bricks work or concrete surfaces, finished even & smooth without using extra cement complete all as specified and as directed. Note : Supply only water proofing compound shall be measured & paid separately . |
| 33 | Supply only liquid water proofing compound |
| 34 | S & F for Mild steel round bars 10 to 12 mm dia as in Handles of Cover slabs |
| 35 | Construction for brick masonry soakage well of size 3m dia X 4.5m depth alongwith excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats complete with fittings and fixtures all as specified and shown on drawing No CESZ/2020/TD 4S sheet 1/2 to 2/2 |
| 36 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender