Tender For Construction Of Kalyan Mandap At Gurundia
Tender Value
71.38 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
10 days left
EMD
71381
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Kalyan Mandap At Gurundia
BOQ
| Sl. No. | Item Description |
| 1 | Ground Floor |
| 2 | CIVIL WORKS |
| 3 | Earth Work : AR0102aa (Earth work in hard soil or gravelly soil foundation & plinth within 50m. Initial lead and 1.5m initial lift) : Earth work in hard soil or gravelly soil foundation & plinth within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge |
| 4 | Earth Work : AR0115 (Filling foundation and plinth with sand well watered and rammed) : Filling foundation and plinth with sand well watered and rammed including cost, conveyance, royalty, taxes of all materials, labours and T & P required for the work etc. complete and as per direction of Engineer-in charge. |
| 5 | Concrete : AR0303 (Cement concrete (1:3:6) with 4 cm. Crusher Broken hard granite metal) : Cement concrete (1:3:6) with 4 cm. hard granite(Crusher Broken) metal including laying in layers not exceeding 300 mm in depth, ramming, compacting to proper thickness, watering and curing for proper period with cost conveyance, royalty, taxes of all materials, labour and T&P required for the work etc. complete and as per direction of Engineer-in charge. |
| 6 | Concrete : AR0307 (Cement concrete (1:2:4)with 12mm size hard broken granite chips per 1cum) : Cement concrete work with (1:2:4) using 12mm size hard granite(crusher broken) chips including hoisting and laying in position compacting to specified design section and curing for proper period with cost conveyance, royalty, taxes of all materials, labour and T&P required for the work etc. complete as per specificaion and direction of Engineer-in charge. |
| 7 | Masonry Brick Work : AR0603c (Flyash Bricks of size (23cm x 11cm x 8cm) in cement mortar (1:6) in foundation and plinth) : Brickwork with Flyash Bricks of size (23cm x 11cm x 8cm) in cement mortar (1:6) in foundation and plinth having crushing strength not less than 75.00 Kg/cm2 with dimensional tolerance ±8 percent immersing the bricks in water not less than six hours with cost conveyance, royalty, taxes of all materials, labor, and T&P required for the work, etc. complete and as per direction of Engineer-in-charge. |
| 8 | Masonry Brick Work : AR0603ci (Flyash Bricks of size (25cm x 12cm x 8cm) in cement mortar (1:6) in superstructure) : Brickwork with Flyash Bricks of size (23cm x 11cm x 8cm) in cement mortar (1:6) in superstructure having crushing strength not less than 75.00 Kg/cm2 with dimensional tolerance ±8 percent immersing the bricks in water not less than six hours with cost conveyance, royalty, taxes of all materials, labor, and T&P required for the work, etc. complete and as per direction of Engineer-in-charge. |
| 9 | Masonry Brick Work : AR0602c (Flyash Bricks of size (23cm x 11cm x 8cm) in cement mortar (1:4) in foundation and plinth) : Brickwork with Flyash Bricks of size (23cm x 11cm x 8cm) in cement mortar (1:4) in foundation and plinth having crushing strength not less than 75.00 Kg/cm2 with dimensional tolerance ±8 percent immersing the bricks in water not less than six hours with cost conveyance, royalty, taxes of all materials, labor, and T&P required for the work, etc. complete and as per direction of Engineer-in-charge. |
| 10 | R.C.C. Work : AR0409 (Supplying, fitting, and placing uncoated HYSD bar reinforcement including labor charges for cutting, bending, binding, and tying the grills and placing in position) : Supplying, fitting, and placing uncoated HYSD bar reinforcement including labor charges for cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge with cost of steel rod and as per drawing, design, and direction of Engineer-in-charge. |
| 11 | Plastering : AR1017 (20mm thick cement Plaster in CM (1:4) over masonry work in inside.) : 20mm thick cement Plaster in CM (1:4) over stone work in inside including racking out joints finishing smooth with proper plumb and line, curing for proper period with cost conveyance, royalty, taxes of all materials, labour and T & P required for the work etc comp.and as per direction of Engineer-in-charge. |
| 12 | Plastering : AR1027 (6mm thick cement Plaster in CM (1:4) over R.C.C. surfaces including chipping (Inside)) : 6mm thick cement Plaster in CM (1:4) over R.C.C. surfaces in inside including chipping with proper level and line, curing for the proper period with cost conveyance, royalty, taxes of all materials, labor, and T & P required for the work, etc comp. and as per the direction of the Engineer-in-charge. |
| 13 | Plastering : AR1014 (16mm thick cement Plaster in CM (1:6) over brick work in inside.) : 16mm thick cement Plaster in CM (1:6) over brick work in inside including racking out joints finishing smooth with proper plumb and line, curing for proper period with cost conveyance, royalty, taxes of all materials, labour and T & P required for the work etc comp.and as per direction of Engineer-in-charge. |
| 14 | Plastering : AR1004 (12mm thick cement plster (1:6) over Brick work in inside) : 12mm thick cement plster (1:6) over Brick work in inside including racking out joints finishing smooth with proper plumb and line curing for proper period with cost conveyance, royality, taxes of all materials, labour and T & P required for the work etc. comp.and as per direction of Engineer-in-charge. |
| 15 | Iron Work : AR1704 (Iron Doors and windows fixing) : Supplying, fitting & fixing of Mild steel and put up for frames & shutters of Doors and windows fixing in position with cost, conveyance, taxes of all materials, labours and T & P required for the work etc. as per direction of Engineer-in-charge. |
| 16 | Other Building Items. : AR1901Ba (Vitrified Tile 600mmx600mm Coloured /Printed) : Supplying, fitting & fixing Vitrified Tile 600mmx600mm Coloured /Printed series(Homogeneous) in floors of size 600mm x 600 mm of approved make conforming IS:13755 laid on 20 mm thick cement mortar(1:4)and filling joints with white cement of approved quality including cost of all work all materials, taxes, labor, T&P , etc. complete as per direction of Engineer-in-charge. |
| 17 | Flooring : AR0817bb (Fixing Vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mmx600mm Coloured /Printed series(Homogeneous) in wall cladding/ glazed tiles on 12mm thick cement plaster (1:3)) : Fixing Vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mmx600mm Coloured /Printed series(Homogeneous) in wall cladding/ glazed tiles on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the vitrified tiles including rubbing and polishing complete including cost of precast tiles. |
| 18 | Flooring : AR0816 (Fixing ceramic Tiles (30cmx30cm / 40cmx40cm special plain/printed series ceramic floor tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755) in floor) : Fixing ceramic Tiles (30cmx30cm / 40cmx40cm special plain/printed series ceramic floor tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755) in floor , treads or steps and landing on a 25mm thick bed of cement mortar 1:1 (1cement: 1sand) jointed with neat cement slurry mixed with pigment to match the shades of the ceramic tiles including rubbing and polishing, cost of precast tiles complete as per direction of Enginer-in-charge. |
| 19 | Flooring : AR0817b (Fixing ceramic tiles (20cmx30cm / 20cmx20cm special plain/printed series ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753) ) : Fixing ceramic tiles (20cmx30cm / 20cmx20cm special plain/printed series ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753) in wall cladding on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the ceramic tiles including rubbing and polishing, cost of precast tiles complete as per direction of Engineer-in-charge. |
| 20 | Flooring : AR0816j (Fixing Chequred Tiles in floor , treads or steps and landing on a 25mm thick bed of cement mortar 1:1) : Fixing Chequred Tiles in floor , treads or steps and landing on a 25mm thick bed of cement mortar 1:1 (1cement: 1sand) jointed with neat cement slurry mixed with pigment to match the shades of the Chequred tiles including rubbing and polishing, cost of precast tiles complete as per direction of Enginer-in-charge. |
| 21 | Other Building Items. : AR1920 (UPVC Window with 6 mm thick clear toughened glass) : Supplying, fitting and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) Three Track -Three panel sliding window - 60 Series duly manfactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and winodw sash 39 mm x 58 mm x 2.5mm capable of mounting single glazing system structurally reinforced with hot dip glavanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced large coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc, including cost and conveyance of all materials accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards and as per direction of Engineer in Charge.(Rate given by Ofice of the Engineer-IN-Chief (Civil) Odisha Nirman Soudha Unit-V, Bhubaneswar vide letter no 20894 dated 26/05/2022) |
| 22 | Wood Work : AR1204c (Providing and fixing ISI marked flushed door shutters confirming to IS:2202(Part-I) decorative type, core of 32 mm thick block board) : Providing and fixing ISI marked flushed door shutters confirming to IS:2202(Part-I) decorative type, core of 32 mm thick block board embedded with 25mm thick teak wood bitto as leaping and well matched 1.5 mm thick decorative laminate of teak three ply veneering with vertical grains or cross bands and face veneer on both faces of shutters with adhesive and complete in all respect. including cost of materials, necessary fittings, labour, conveyance, taxes of all materials, T&P, etc . and as per direction of Engineer in charge. |
| 23 | Other Building Items. : AR1918 (UPVC Door with 12mm thick WPC Board) : Supplying, fitting and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) casement Door - 60 Series duly manfactured using UPVC reinforced profiles of 60mm x 55 mm x 2.5 mm for outer frames, 102 mm x 60 mm x 2.25mm for casement door Sash Profile and 74 mm x 60 mm x 2.5 mm mullion profile capable of mounting single glazing system structurally reinforced with hot dip glavanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of green ply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 no per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc, including cost and conveyance of all materials accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards and as per direction of Engineer in Charge. (Rate given by Ofice of the Engineer-IN-Chief (Civil) Odisha Nirman Soudha Unit-V, Bhubaneswar vide letter no 16100 dated 08/05/2018) |
| 24 | Other Building Items. : AR1902 (cement based wall putty (water based)) : Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes,labour,T&P,etc.complete. and as per the direction of Engineer in Charge. |
| 25 | Painting : AR0918f (Finishing wall with two coat weather coat paint of approved shade in the outer surface of old work(Outside)) : Finishing wall with two coat weather coat paint of approved shade in the outer surface of old work to give an even shade including all costs of labour, Paint, Brushes, and putty required for the work, etc. complete and as per direction of Engineer-in-charge. (Outside) |
| 26 | Other Building Items. : AR1911 (Stainless steel of 304 grade in hand railing using 50mm dia of 2mm) : Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost,conveyance, taxes of all materials, labour,T&P etc. required for the complete in all respect. and as per direction of Engineer in Charge |
| 27 | R.C.C. Work : AR0410c (R.C.C. foundation , plinth band and footings bases of columns mass concrete precast slabs etc) : Rigid and smooth centring and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor R.C.C. foundation, plinth band and footings bases of columns mass concrete precast slabs, etc |
| 28 | R.C.C. Work : AR0410d (Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting) : Rigid and smooth centring and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor R.C.C. beams, column, grider and bressmer, etc. Data for 4.2sqm |
| 29 | R.C.C. Work : AR0410b (centering and shuttering fRigid and smooth or R.C.C. works including false works and dismantling them after casting) : Rigid and smooth centring and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor R.C.C. stairs excluding landing but including railing details for 5 Sqm |
| 30 | R.C.C. Work : AR0410e (Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting) : Rigid and smooth centring and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor R.C.C. Lintels Data for 7.8 sqm |
| 31 | R.C.C. Work : AR0410f (Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting) : Rigid and smooth centring and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor in ground floor R.C.C. walls and fins including attached pilasters |
| 32 | R.C.C. Work : AR0410a (Centring & Shuttering for R.C.C. floor and roof slabs, landings,balconies, projecting sun shades and chajjas) : Rigid and smooth centring and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor R.C.C. floor and roof slabs, landings, balconies, projecting sun shades and chajjas up to 4.3m height |
| 33 | R.C.C. Work : AR0404B (Reinforced cement concrete work of M-20 grade with 20mm & downgrade size black hard crusher broken granite chips.(Nominal mix as per IS-456, Table-9).) : R.C.C. work of M-20 grade with 20mm & downgrade size black hard crusher broken granite chips including hoisting and laying in position compacting to specified design section and curing for proper period with cost conveyance, royalty, taxes of all materials, labour and T&P required for the work etc. complete and as per direction of Engineer-in charge(Nominal mix as per IS-456, Table-9). |
| 34 | Painting : AR0920 (Finishing wall two coats with plastic emulsion paint of approved shades on new work (Inside)) : Finishing wall two coats with plastic emulsion paint of approved shades on new work to give an even shade including all costs of labor, Paint and Brushes required for the work, etc. complete and as per direction of the Engineer-in-charge.(Inside) |
| 35 | Painting : AR0901d (Priming one coat with inner surface primer of approved quality water-bound primer over plastering surfaces (Inner surface)) : Priming one coat with inner surface primer of approved quality water-bound primer over plastering surfaces including cost conveyance, taxes of all materials, labor and T&P required for the work complete as per direction of the Engineer-in-charge. |
| 36 | PH WORKS |
| 37 | Cost of Water Supply and PH Fitting with 19 nos of Item |
| 38 | Electrification |
| 39 | Recessed wiring to light point/fan point/exhaust point with 1.5 mm Fr PVC insulatedsingle core mult |
| 40 | (Gr B ) (1.1.2-1.24.2) |
| 41 | (Gr C) (1.1.3-1.24.2) |
| 42 | S/F of MS Box for 2 Module 18 swg |
| 43 | S/F of MS Box for 4 Module 18 swg |
| 44 | S/F of MS Box for 8 Module 18 swg |
| 45 | S/F of MS Box for 12 module 18 swg |
| 46 | S/F of 3 pin 5/6 A.F.T. switch and socket on existing Board(Modular Type) (1.251+1.25.4) |
| 47 | S/F for 6 module M.S. Box with backlite cover (Moodular Type) on surface or in recess including prov |
| 48 | S/F of Power Point with 4modular metal box with Modular base & Cover in recess including providing a |
| 49 | S/F of AC Stater 20amp with 2 module Box (make havells /Equivalent) |
| 50 | S/F of 15 A Socket on 2 Mopdule for Ac |
| 51 | S/F of 2 Modular Box with 5 a modular Socket outlet of ISI marked on separate board for wall fan |
| 52 | S/F of power point with 4 modular metal box with modular base & cover in recess including providing |
| 53 | Wiring for cercuit main alongwith earth wire with following sizes of PVC insulated single core multi |
| 54 | 2 x 2.5 sqmm +1x 1.5sqmm (1.8.2) |
| 55 | 2 x4 sqmm + 1 x1.5 sqmm (1.8.3) |
| 56 | 2x6 sqmm + 1x 2.5sqmm (1.8.4) |
| 57 | 2x6 sqmm +2x2.5 sqmm (1.8.10) |
| 58 | Inverter Wiring (1x1.5 sqmm) Copper wire (1.19.1) |
| 59 | S/F of 5 to 32 A rating 240 volt\\"B\\" series MCB for lighting and other load in the existing MCB Distr |
| 60 | S/F of 32 A rating \\"C\\" Series DP MCB (Make (L&T/Havells /equivalant) |
| 61 | Supply,Installation testing and commissioning of 63 A IC TPN main switchs (IS 13940) with supply of |
| 62 | Supply of 250 mm x 300mm x 100 mmdeep (1.24.13) for fixing 63 Amp ICTPN Main Switch |
| 63 | Supply of 100 amp T.P.N. Copper Bus Bar with all connection (Make :BENLO) |
| 64 | S/F of MCB 8 way double door (2.3.6) |
| 65 | S/F batten holder BK angle Holder ISI marked including connection etc insulated of celling rose (1.2 |
| 66 | Earting with GI Pipe of 3 mt long 40 mm dia ISI marked including accessories & providing masonarye |
| 67 | Supply & laying 6SWG G.I. wire recess for loop earting as required (3.17) |
| 68 | S/F Fan Hook S Type on Cilling |
| 69 | S/F step type modular fan regulator |
| 70 | S/F of 12 watt LED bulb (make havells/Policab or equivalent |
| 71 | S/F of 300 exhaust fan with all accessories and connections (make USHa-aero clean plus DBB/Policab - |
| 72 | S/F 1200 mm A.C. Cilling fan (1 star) with all accessories and connection without regulator(make Ush |
| 73 | S/F of 400 mm AC wall fan with all accessories ( malke Usha -max air ultra or equivalant |
| 74 | S/F of 18-25 LED tube light fitting complite with all connection |
| 75 | Supply & fixing of 60 wall LED street light with LED & Electrinic driver including all accessories ( |
| 76 | Supply 3.5 core 25sqmm PVC insulated and PVC seated /XLPE power cable of 1.1 kv grade Armoured cabl |
| 77 | Laying of MV cable up to 25 sqmm in Ground (5.1.1) |
| 78 | Laying of MV cable upto 25 sqmm on surface |
| 79 | S/F of 40 mm HDPE pipe for laying & protection of cable (make Sudhakar or equivalant) |
| 80 | S/F of 18w recess Mount (Round/square) type cilling light (Havells/cromton/Policab or equivalant) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender