Tender For Construction Of Office Building Of Assistant Labour Officer At Jamankira Block
Tender Value
1.55 Crore
Estimated cost
Bid Submission
31 Jul 2026
8 days left
EMD
1.55 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sambalpur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Office Building Of Assistant Labour Officer At Jamankira Block
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation in foundation hard soil including moorum, stoney earth mixed with boulders with all leads and lifts including dressing and levelling the bed and depositing the excavated earth away from the work site with all leads and lifts including cost of all labour and T&P and cess required for the work and etc. complete in all respect and as per the direction by the Engineer-in-charge. |
| 2 | Supplying, filling in foundation and plinth with sand in layers well watered and rammed including cost, conveyance, royalty of all the materials required for the work labour with T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 3 | Providing cement concrete (1:3:6) in foundation and plinth using 4cm size clean hard black granite crusher broken metal of approved quality from approved quarry including hoisting, lowering and laying in layers not exceeding 15cm thick to the required level, ramming watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 4 | Flyash brick masonry in cement mortar (1:6) in foundation & plinth using Flyash bricks of 23x11x8cm size having a crushing strength. of not less than 75 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 5 | Cement concrete of proportion (1:2:4) using 12mm size hard granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete and compacting in layers not exceeding 15cm thick with proper packing and ramming each layer of concrete by means of vibrator including watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 6 | Clearing heavy jungle including uprooting stumps of trees & tree above 1 m girth & thick bushes including bamboo premeasurement |
| 7 | Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment). |
| 8 | Ground FloorProviding R.C.C work of M-25 grade with 20mm and down graded clean hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete with necessary slope and smoothness to receive tar felting or terracing, watering and curing for four weeks, including centring, shuttering and finishing the exposed surface and ceiling smooth to receive white washing or painting providing grooves or beads and fan hooks as per requirement in ceiling where necessary, cost of water, including cost, conveyance, royalty taxes of all the materials and labour, T&P and cess etc. complete in all respect but excluding cost of M.S rods or Tor steel and binding wire 18 to 20 gauge and labour charges for straightening, cutting, bending and binding and tying the grills and placing in proper position as per specification and direction of the Engineer-in-chargeColumn base |
| 9 | Plinth beams |
| 10 | Columns |
| 11 | Lintels |
| 12 | Chajja |
| 13 | Roof Slab |
| 14 | Stair case |
| 15 | First FloorColumns & Beams |
| 16 | Lintels |
| 17 | Chajja |
| 18 | Roof Slab |
| 19 | Stair case |
| 20 | Cutting, bending, binding and tying the grills and placing in proper position as per drawing and design including cost, conveyance and taxes of M.S rods and binding wire with all labour T&P and cess required for the work etc. complete in all respect in all floors(weight of binding wires will not be considered as measurement of M.S rods) as per specification and direction of the Engineer-in-charge.Ground Floor |
| 21 | First Floor |
| 22 | Flyash brick masonry in cement mortar (1:6) in super structure using Flyash bricks of 23x11x8cm size having a crushing strength of not less than 75 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 23 | First Floor |
| 24 | 20mm th Cement plaster in C.M (1:6) finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 25 | First Floor |
| 26 | 16mm th Cement plaster in C.M (1:6) to brick work finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 27 | First Floor |
| 28 | 12mm th Cement plaster in C.M (1:6) to brick work finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 29 | First Floor |
| 30 | 6mm th Cement plaster in C.M (1:4) to R.C.C surface finished smooth including closed deep chipping and slury treatment including watering, curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 31 | First Floor |
| 32 | Providing fitting and fixing of false ceiling with aluminium anodised T section no. 3215 with 2' 0\\" center to center, L section no. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the aluminium grid 2'-0\\" x 2'0\\" suspended from ceiling using 12.5 mm th Gypsum board size 6' x 4' including cost, coveyance of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 33 | Providing and fixing Vitrified tiles in floors, treads of steps and landing on 20mm th bed of cement mortar (1:4) (1 cement:4 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 34 | First Floor |
| 35 | Providing and fixing Glazed tiles in floors, treads of steps and landing on 25mm th bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 36 | First Floor |
| 37 | Providing and fixing Glazed tiles in dados, skirting and rises of steps on 12mm th cement plaster (1:3) (1cement:3sand) joined with neat cement slurry mixed with pigment to match the shade of tiles, rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 38 | First Floor |
| 39 | Providing and fixing Chequred tiles in floors, treads of steps and landing on 25mm th bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 40 | Providing and fixing Granite tiles in dados, skirting and rises of steps on 12mm th cement plaster (1:3) (1cement:3sand) joined with neat cement slurry mixed with pigment to match the shade of tiles, rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-chargeCompound Wall |
| 41 | Finishing surface of walls with cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost of all materials taxes, labour T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 42 | Wall painting two coats with plastic emulsion paint of approved shade over a coat of priming on new work to give an even shade with approved shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 43 | First Floor |
| 44 | Finishing walls with water proofing cement paint (Weather coat) of approved shade on new work two coats, over a coat of priming, to give an even shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 45 | First Floor |
| 46 | Supplying, fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality with frame, shutters and all fittings and fixtures etc complete including cost, conveyance, taxes, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 47 | Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality with frame, shutters and all fittings and fixtures etc complete including cost, conveyance, taxes, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 48 | Providing, fitting & fixing 4\\" dia Waist PVC pipe including fitting & fixing etc. complete1st floor |
| 49 | Supplying, fitting and fixing ISI marked 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc complete including cost, conveyance, taxes, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 50 | Supplying, fitting, fixing of Aluminium door with OEL anodized Al door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick pre-laminated board in bottem portion fixed on door frame by means of tapered clip No 4660 and the frame to be completed by means of joining angle section No. 1855 including cost of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 51 | Supplying, fitting and fixing of FRP Door Frame (GRP) of 75mm x 100mm size of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes of all materials required for the work, labour and T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 52 | Supplying, fitting and fixing of FRP Door Shutter (GRP) of 32mm thick of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes of all materials required for the work, labour and T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 53 | Providing, fabricating, transporting and supplying at site of M.S Doors, Windows, Grills and shutters of approved design with cost, conveyance, taxes of all materials required for the work, labour and T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 54 | Labour for fixing of M.S doors and windows shutters of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 55 | Painting two coats over a coat of primer with any approved paint with brush to wood/iron work including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 56 | First Floor |
| 57 | Supplying fitting and fixing of Stain less steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr c/c and stain less square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. including cost of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 58 | Earth work excavation in foundation hard soil including moorum, stoney earth mixed with boulders with all leads and lifts including dressing and levelling the bed and depositing the excavated earth away from the work site with all leads and lifts including cost of all labour and T&P and cess required for the work and etc. complete in all respect and as per the direction by the Engineer-in-charge. |
| 59 | Providing and Fixing slidding door Wardrobe of size 4LX 7HX 1 10 D with 18 mm thick BWP ply of Make Marino/ Century /Archidply etc, Top, bottom,side panels and Shelve are to be made up of 18mm BWP Ply and back support with 12mm thick BWP ply with all inner side 0.6 mm white laminates and outer side 1 mm decorative laminate (Textured) make Marino/ Century /Archidply . The Door to be made up 18 mm thick block board of make Marino/ Century /Archidply with necessary slidding arrangements make Hettich/Hafele and concelaed handle. One drawer of size 1 6 (W) x 7 (H) x 1 10 (D) should be provided made of 18mm thick prelam BWP ply with decorative laminate (Texture), soft close channels, concealed handle etc. Aluminum hanger rod of 25mm dia with brackets, All exposed edges to be sealed with 1mm thick PVC edge banding including all cost of materials, T&P, all labour etc complete as per the Direction of Engineer in - charge. |
| 60 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by block making machine with proper compaction laid in required patten etc complete in all respect confirming to IRC SP-63-2018 including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 61 | Supplying and fixing of Pre cast Kerb stone of size 600mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by block making machine with proper compaction fixed in required patten etc complete in all respect confirming to IS5758:1984 including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 62 | Providing rigid, smooth centring and shuttering including false works and dismantling them after casting including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 63 | Supplying fitting fixing MS Gate as per approved design & quality as per the direction of EIC |
| 64 | EIRecessed wiring to light point/fan point/exhaust point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2) |
| 65 | -do- (Gr.B) (1.1.2-1.24.2) |
| 66 | -do- (Gr.C) (1.1.3-1.24.2) |
| 67 | S/F of M.S. Box for 2 Module 18 swg |
| 68 | S/F of M.S. Box for 4 Module 18 swg |
| 69 | S/F of M.S. Box for 6 Module 18 swg |
| 70 | S/F of M.S. Box for 8 Module 18 swg |
| 71 | S/F of M.S. Box for12 Module 18 swg |
| 72 | S/F of 3 pin 5/6 A.F.T switch and.Socket on existing board (Modular type) (1.25.1+1.25.4) |
| 73 | S/Fof 6 module M.S. Box with Bakelite cover (Modular Type) on surface or in recess including providing and fixing of 2 nos 3 pin 5/6 amp. Socket out let 5/6amp. Piano type modular switch,connection,painting etc. as required (1.24.4 +2 x (1.25.1+1.25.4) |
| 74 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required |
| 75 | S/F of A.C.Starter 20Amp with 2 module Box.(Make Havells/Equivalent) |
| 76 | S/F of 15A Socket on 2 module for AC |
| 77 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1) |
| 78 | -do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2) |
| 79 | -do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3) |
| 80 | -do- 4x10sqmm + 2 x 4 sqmm (1.8.11) |
| 81 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 82 | S/F of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) |
| 83 | S/F of 63A ICTPN main switch with MS box of 250mmx300mmx60mm deep ( (2.15.3)+(1.24.16 ) |
| 84 | S/F 100A TPN Bus-Bar with all connection (Make:BENLO & Equivalent) |
| 85 | S/F OF 63A 4POLE MCB C-TYPE (Make:L&T/Equivalent |
| 86 | S/F of 32A rating \\"C\\" Series DP MCB (Make: L&T/Equivalent) |
| 87 | S/F of 4way( 4+12) TPN MCB DB Double door (2.5.5) |
| 88 | S/F of MCB 8 Way Double Door (2.3.1) |
| 89 | Provn. of 3 1/2 x 35 sqmm Armoured Cable with all connections(25) |
| 90 | Laying of MV cable above 25sqmm to 120 sqmm in ground(5.1.2) |
| 91 | S/M of end termination of 31/2 X 35 (5.8.21) |
| 92 | S/F of 63A Wall Mounted Pannel board (36\\"x33\\"x10\\") .1). 63a 4P 25KA MCCB-01NO. Icu-100% Ics (Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) with spreader, rotary handle and UV relaease 2)63a Manual change over -01(Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) with Aux Contact Kit, Operating handle kit and out put shorting link. Spreader Link-01 No. 3) 63a 4P AC 10K C-Curve MCB-03 (Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) 4) 40A C-Curve DP DP MCB-03 (Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) 5) SPD type 1+2,50ka 3P+N-01NO. (Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) 6) INSTRUMENT- (i) 3 numbers phase indicating lamp with toggle switch and HRC Fuse-2 SET. 7) (i) 02 SET of digital type multification meter with CT for voltage ,current, Freqency, PF,,THD Indication with RS 485 COMPACTIVITY for bms data. 100A Ext. 8) 100A/5 CTS-6 9) 100A BUSBAR-4.1KG with all materials. |
| 93 | S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28) |
| 94 | S/F of Copper earth plate earthing 600mm x600mm x3.15mm with Salt and Charcoal for Plate earth electrode ( 3.5+3.6 ) |
| 95 | S/L of 25mm x 6mm G.I. earth strip in ground ( 3.10 ) |
| 96 | S/F of Fan hook S, Type on ceiling. |
| 97 | S/F of step type modular fan regulator |
| 98 | S/F of 12 Watt. LED bulb. |
| 99 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 100 | Supply of 180 mm x 100 mm x 60mm deep (1.24.5) for fixing call bell |
| 101 | S/F of 300 exhaust fan with all accessories and connections(Make-Usha-Aero Clean plus DBB/Polycab-Fress on DBB/Cromton-Trans Air12\\" reversible/Havells-Ventil Air DS(HS)/Ancor-Anmol DelusR/Orient-Power Flow DBB |
| 102 | S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS) |
| 103 | S/F of 18-25 watt LED Tube light fitting compoete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL) |
| 104 | S/F of 18 Watt Ceiling Light Recessed Mount or Surface Mount(Round or Square )Type(Make Havells/Crompton/Polycab or Equivalent) |
| 105 | S/F of 1.5T 5Star split type AC Machine, Make-Carrier /Blue Star /Hitachi |
| 106 | S/F of Voltage Stabilizer(110-300V) Upto 1.5Ton AC, Make-Microtech/V-Guard |
| 107 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB and indicator complete with wiring on 12 modular M.S. box with modular cover. |
| 108 | S/F OF 1400VA/12v Invertor with 1no 180Ah Battery including Trally arrangement. (Luminous/Microtek/Excide) |
| 109 | S/F of 2000/24VVA Inverter with 2 nos. 180 Ah Tubular battery including trally arrangement (Make: Microtake/ Luminous) |
| 110 | Supply & Fixing of 30-35Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 111 | PHSupplying all materials,labour,T&P and fitting&fixing of 4.0kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No. 13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(a)110mm dia PVC pipe S Trap to DB=2x0.90m+2x0.90m=3.60mP Trap to DB=2x0.60m+2x0.60m=2.40mDB to Tee=2x2.00m+2x2.00m=8.00mDB to DB=2x2.00m=4.00mP trap to DB=2x0.60m=1.20m 2x2.00m= 4.00mDB to SP=4x2.00m=8.00mTee to I/C=2x2.00m=4.00mVent Pipe=2x7.00m=14.00mP Trap to DB=1x0.60m+2.30m=2.90mDB to Tee=2x3.60m=7.20m 2x2.00m=4.00mS Trap to DB=2x0.90m=1.80mDB to DB=1x2.00m=2.00mVent Pipe=1x7.00m=7.00m |
| 112 | b110mm dia PVC P trap |
| 113 | (c)110mm dia PVC Door Tee |
| 114 | (d)110mm dia PVC D/J/D |
| 115 | (e)110mm dia PVC Door Bend |
| 116 | (f)110mm dia PVC Plain bend |
| 117 | (g)110mm dia PVC offset |
| 118 | (h)110mm dia PVC cowl |
| 119 | (i)125mm dia CP Grating |
| 120 | Supplying all materials,labour,T&P and cutting holes through brick/stone masonry walls for taking PVC pipes and fittings including making good the damages etc all complete as per the PH specification and direction of E.I.C.(a)375mm thick wall |
| 121 | (b)250mm thick wall |
| 122 | (c)Roof cutting |
| 123 | Supplying all materials labour T and P and fixing wash down water closetAnglo Indian water closet with integral S or P trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cm1 1 etc all complete as per specification and direction of EICEIWC with S Trap with sheet cover makeParryware Hindware |
| 124 | Supplying all materials,labour,T&P and fixing Wall Mounted Grab Bar including all complete as per specification and direction of the E.I.C.Wall Mounted Grab Bar 600m long |
| 125 | Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc.all complete as per PH specification and direction of E.I.C.(a)550mmx400mm WHB with 32mm dia cp west,west pipe,brackets and connection pipe(make- parryware) |
| 126 | (a)Pedestrial for basin(make- parryware) |
| 127 | Supplying all materials,labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixing to wooden plugs with CP screws and washers complete as per PH specification and direction of E.I.C.(a)600mmx450mm BE Mirror |
| 128 | Supplying all materials,labour T&P and fixing standard size glass shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C.(a)(125x600)mm size glass-shelf with CP Guard rail(make -Parryware) |
| 129 | Supplying all materials,labour T&P and fixing standard size CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C.(a)CP towel ring(make -Parryware) |
| 130 | Supplying all materials,labour T&P and fixing standard size CP soap holder complete with CP Brass brackets fixed to wooden plug with CP screws as per P.H. specification and direction of E.I.C.(a)CP Soap holder |
| 131 | Supplying all materials labour T&P and fixing Ciramic tiles/marble tiles/kota tiles/ kodapa tiles/chequered tiles in floors,threads,landing on 25mm thick bed of cm(1:1)jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of precast tiles etc. all complete as per specification and directiof E.I.C. (a)In GF |
| 132 | (b)In FF |
| 133 | Supplying all materials labour T&P and fixing porcelain glazed tiles/marble tiles/ Kota tiles/Kodapa tiles in dados skirting and risers of steps on 12mm thick CP(1:3)jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing & polishing complete including cost of tiles etc. all complete as per spcificaiton and direction of E.I.C.(a)In GF |
| 134 | (b)In FF |
| 135 | Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member,9201 as top,9200 as bottom and middle member with frame section as 9221with tapered clip no 4660 & frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board.and as per direction of the E.I.C. |
| 136 | Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of E.I.C.Initial lift upto 1.50m |
| 137 | From 1.50m to 3.00m depth |
| 138 | Supplying all materials labour T&P and filling foundation & plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royality,taxes etc. all complete as per the direction of E.I.C. |
| 139 | Supplying all materials labour T&P and providing cc(1:3:6)using 4cm hg metal including watering,curing,conveyance of all materials to work site,payment of royality,taxes etc.all complete as per specification and direction of E.I.C. |
| 140 | Supplying all materials labour T&P and providing cc(1:1.5:3)using 12mm hg chips including watering,curing,conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 141 | Supplying all materials labour T&P and providing Flyash brickwork in cm(1:4) F&P having crushing strength not less than 75kg/cm2 with dimensional tolerance +/-8%including watering,curing conveyance all material to worksite payment of royality taxes etc.all complete as per specification direction of E.I.C. |
| 142 | Supplying all materials labour T&P and providing rigid and smooth centering & shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite,payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 143 | Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 144 | Supplying all materials labour T&P and providing RCC(1:1.5:3)using 12mm hg chips for RCC works including hoisting,laying,watering,curing,conveyance of all materials to work site,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 145 | Supplying all materials,labour T&P and providing 12mm thicks CP(1:3)with punning on brick/stone work including watering,curing conveyance of all materials to work site,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 146 | Supplying all materials labour T&P and fixing MS step iron in 12mm dia MS steel bar and fixing into walls of septic tank duly embedded in cc(1:3:6)all complete as per PH specification and direction E.I.C. |
| 147 | Supplying all materials labour T&P and fixing of RCC baffle wall precast with cc(1:1.5:3)using 12mm bhg chips and fitted to septic tank as per P.H. specification and direction E.I.C. |
| 148 | Supplying all materials,labour,T&P and providing fitting&fixing PVC Tee in wall including fitting the necessary with cc(1:1.5:3)with 12mm size hg chips all complete including watering,curing,conveyance of all materials to worksite, payment of royality,taxes etc. all complete as per specification and direction of E.I.C.(a)110mmx110mmx110mm PVC Tee |
| 149 | Supplying all materials labour T&P and Providing cement flush pointing(1:3)to brick masonary including watering,curing,conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C. |
| 150 | Supplying all materials labour T&P and providing 500x500x100mm thick RCC precast MH cover in cc(1:1.5:3)using 12mm hg chips placing the cover on the MH/S tank & finishing smooth all complete as per specification and direction of E.I.C. |
| 151 | Filling in F&P with excavated materials including watering and ramming as per direction of E.I.C. |
| 152 | Supplying all materials labour T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB brickwork in cm(1:6)moulding&shaping the channel inside&benching with cc(1: 1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside, cement flush pointing(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size hg chips with RCC manhole cover,e.w in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C.(a)Inside size 760mmx760mmx460mm |
| 153 | Supplying all materials labour T&P and laying PVC pipe sewer line Grade-A of the following internal dia in trenches(to level or slope)and jointing with gasket & stiff mixture or cm(1:1),cc(1:3:6)with 40mm size hg metal on bed of the trench and hunching or allround concrete encasing with cc(1:4:8)using 40mm size hg metal including curing,conveyance to worksite,payment of royality,taxes etc and testing all complete as (a)110mm dia PVC pipe with allround Hunch top |
| 154 | Supplying all labour T&P and constructing soakwaypit of the following sizes with dry brick walling from bottom upto invert of inlet pipe & 1st class KB brick work in cm(1:6)for the remaining height at top,12mm thick CP(1:4)inside & outside over masonary brickwork,gravel packing in the rear of well steining RCC coverslab in cc(1:1.5:3)using 12mm size hg chips fitted handles including ew in open well excavation in all kinds of soil and refilling the cavity around the pit & painting the iron work,watering,curing,conveyance of all meterails to worksite,payment of royality,taxes etc. all complete as per approved drawing specification and direction of E.I.C.(a)1.20m dia x 2.00m deep |
| 155 | Supplying all materials,labour,T&P and construction of masonry staging with providing 1st class KB brickwork in cm(1:6)of 0.46mtr height in staging,12mm CP in cm(1:6),RCC beam of 0.25mx0.30mx2.60m in cc(1:1.5:3)using 12mm size HG chips including centering,shuttering,bending and binding of rod etc watering,curring,conveyance of all materials to work site,payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(a)Stagging for 2000ltr. Storage Tank (1st Floor) |
| 156 | Supplying all materials,labour,T&P and Fitting&Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5mtr above GL and placing the tank in required position including conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.(a)2000ltr water storage tank(1st Floor) |
| 157 | Supplying all materials,labour,T&P and fitting&fixing 10ltr capacity low level flushing cystern with a pair of cast iron or ms brackets complete with fittings such as syphonic arrangements 15mm nominal size brass/PVC ball valve with polythene float,CP brass handle,union and couplings for connection with inlet, outlet and overflow pipes,32mm dia c.p. flush bend,15mm dia. PVC inlet connection pipe including cutting holes and making good the same and connecting the flushbend with cystern and closet and connecting inlet pipe with supply main etc. all connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C. (a)10Ltr.Capacity low level cistern |
| 158 | Supplying all materials,labour,T&P providing and fixing to wall or ceiling and floor PVC pipe conforming to ASTM-D-1785/89(sch-80) and pipe fitting of the following nominal bore with clamps including making good the wall,ceiling and floor testing all complete as per specification and direction of E.I.C.(a)32mm dia C-PVC pipe |
| 159 | (b)25mm dia C-PVC pipe |
| 160 | (c)20mm dia C-PVC pipe |
| 161 | Supplying all materials,labour,T&P cutting holes through brick/stone masonry works including making good the damages in cm(1:4)for taking GI/PVC pipe & fitting etc. all complete as per PH specification and direction of E.I.C.(a)In GF |
| 162 | (b)In FF |
| 163 | Supplying all materials,labour,T&P cutting holes in RCC floors,roofs etc.up to 19cm thick for passing GI/PVC pipes fittings and reparing the holes after insertion of pipe etc. with cc(1:1.5:3)including finishing so as to make it leak proof as per direction of E.I.C. |
| 164 | Supplying all materials,labour,T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of E.I.C.(a)In GF |
| 165 | (b)In FF |
| 166 | Supplying all materials,labour,T&P and fitting & brass/CP fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H. specification and direction of E.I.C.(make-Jaguar)(a)15mm dia CP(SB)Bib cock |
| 167 | (b)15mm dia CP Two way Bib cock |
| 168 | (c)15mm dia CP Pillar cock swan neck |
| 169 | (d)15mm dia CP Angle Stop cock |
| 170 | (e)15mm dia Health Faucet & 1.0m long Flexible pipe |
| 171 | (f)25mm dia PVC FWV |
| 172 | (g)15mm dia CP Flange |
| 173 | (h)15mm dia CP Extension piece |
| 174 | Supplying of ISI mark 1.00HP single phase vertical submersible pump set with discharge of 900-1000ltr/hour and a head of 55-70m of reputed make like KSB/ Texmo & equivalent including all cost,conveyance and taxes etc all complete as per direction of E.I.C. |
| 175 | Supplying all labour,T&P and fitting and fixing of 1.00HP single phase vetrical submersible pump set with commissioning and testing etc.all complete as per direction of E.I.C. |
| 176 | Supplying fitting & fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveyance of all taxes etc all complete as per direction of the E.I.C. |
| 177 | Supplying all materials labour T&Pand fitting & fixing of 2.5mm2 3core copper flat suitable cable having ISI mark of reputed company like BCH/Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 178 | Supplying fitting and fixing of plastic rope MS Well cover,MS Clamp,Stainless steel short piece,bend & socket including all cost,taxes etc all complete as per direction of the E.I.C. |
| 179 | Supplying fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C. |
| 180 | Labour for drilling of perfactly vertical bore holes as specified dia.For a specified depth below GL through consolidated & uncosolidated rock with down the hole hammer drilling rigs or combination drilling rigs(600cfm/200psi) as required to suit the site conditions as per the direction of E.I.C.including use of own rigs with its accessories,tools & plants and consumable etc. for lowering 200mm dia PVC/GI pipes for house fitted with socket and with or without well screen as per the necessity for the soft,medium,hard & boulder formation(PCV/GI)casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and with drawing after complete of tube well.(Tube well-1No)((a)Drilling of 200mm. dia. Bore-0.00mtr to 44.40mtr |
| 181 | (b)Drilling 150mm dia. Bore-44.40mtr to 200.00mtr |
| 182 | Lowering the following GI/PVC pipe with or without soltted pipes as per necessity from GL upto 30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing materials,T&P etc the top of the casing pipe threaded including piping tubewell to prevent entry of foreign materials from above(PVC/ GI)supplied by the contractor(including cost of pipe)(a)Lowring of 200mm dia pipes-0.00mtr to 44.40mtr |
| 183 | (b)Cost of 200mm dia PVC casing pipes-0.00m to 45.00m |
| 184 | Cleaning & developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender